Will it Crease or Cease? A study of Debulking of Air Pockets in Automated Prepreg Composite Layup

Abstract Automatic draping of carbon-fiber prepreg plies for the aerospace industry is a promising technique for lowering the manufacturing costs and to this end, a thorough in-process quality control is crucial. In this paper, out-of-plane defects in the layup are investigated. After draping, air pockets are occasionally encountered. The question is, if such apparent defects can be mitigated sufficiently during vacuum debulking. The 3D topology is measured by means of a structured-light 3D scanner and air pockets are segmented. An approximate mass-spring ply model is used to study the behavior of the air pockets during application of vacuum pressure. The model is computationally fast and will indicate online whether the air pocket will be removed or manual intervention is required. Upon comparing the model predictions with experimental data, it is shown that the system is capable of correctly predicting 13 out of 14 air pockets in a test layup.

[1]  C. Mattei,et al.  An experimental study of mechanisms behind wrinkle development during forming of composite laminates , 2013 .

[2]  K. Potter,et al.  Consolidation-Driven Defect Generation in Thick Composite Parts , 2018 .

[3]  Christian Schlette,et al.  Fast and Simple Interacting Models of Drape Tool and Ply Material for Handling Free Hanging, Pre-impregnated Carbon Fibre Material , 2018, ICINCO.

[4]  David E. Breen,et al.  A Particle-Based Model for Simulating the Draping Behavior of Woven Cloth , 1993 .

[5]  Pierre Soille,et al.  Morphological Image Analysis , 1999 .

[6]  S. Advani,et al.  A continuum approach for consolidation modeling in composites processing , 2020 .

[7]  Rafael C. González,et al.  Digital image processing using MATLAB , 2006 .

[8]  Bernard Haussy,et al.  Discrete models of woven structures. Macroscopic approach , 2007 .

[9]  K Khodabandehloo,et al.  Modelling Flexible Sheets for Automatic Handling and Lay-up of Composite Components , 1995 .

[10]  H. M. Taylor,et al.  39—The Fitting of Woven Cloth to Surfaces , 1956 .

[11]  Christian Krogh,et al.  Modeling of Prepregs during Automated Draping Sequences , 2017 .

[12]  I. Herszberg,et al.  3D deformation models for the automated manufacture of composite components , 2006 .

[13]  P. Hubert,et al.  Vacuum-bagged composite laminate forming processes: Predicting thickness deviation in complex shapes , 2019, Composites Part A: Applied Science and Manufacturing.

[14]  Nico Blodow,et al.  Towards 3D Point cloud based object maps for household environments , 2008, Robotics Auton. Syst..

[15]  Christian Krogh,et al.  Modeling the robotic manipulation of woven carbon fiber prepreg plies onto double curved molds: A path-dependent problem , 2019, Journal of Composite Materials.

[16]  Ivan Giorgio,et al.  Continuum and discrete models for structures including (quasi-) inextensible elasticae with a view to the design and modeling of composite reinforcements , 2015 .

[17]  Reinhold Ritter,et al.  White light heterodyne principle for 3D-measurement , 1997, Other Conferences.

[18]  J. Sherwood,et al.  Picture-frame testing of woven prepreg fabric: An investigation of sample geometry and shear angle acquisition , 2020, International Journal of Material Forming.

[19]  Richard Butler,et al.  Out-of-plane ply wrinkling defects during consolidation over an external radius , 2014 .

[20]  P. Sharma.  Mechanics of materials. , 2010, Technology and health care : official journal of the European Society for Engineering and Medicine.

[21]  Jian Cao,et al.  A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics , 2005 .

[22]  Michael R Wisnom,et al.  A new mechanism for the formation of ply wrinkles due to shear between plies , 2013 .

[23]  James A. Sherwood,et al.  Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results , 2008 .

[24]  S. Hallett,et al.  A numerical study examining the formation of consolidation induced defects in dry textile composites , 2018, IOP Conference Series: Materials Science and Engineering.

[25]  Philip G. Harrison,et al.  Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh , 2016 .

[26]  Emmanuelle Vidal-Salle,et al.  Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses , 2011 .

[27]  L.-P. Ellekilde,et al.  Design of Automated Robotic System for Draping Prepreg Composite Fabrics , 2020, Robotica.