Quaternary Ammonium Compound in Anolyte without Functionalization Accelerates the Startup of Bioelectrochemical Systems using Real Wastewater

Abstract Quaternary ammonium has been demonstrated to be an efficient functional group for anodic material modification in bioelectrochemical systems (BESs). However, not all anode materials can be easily functionalized with quaternary ammonium. Here QAC of 0.05 M, 0.01 M and 0.001 M is directly added in anolyte instead of complex material functionalization. The startup time of 0.01 M (91 ± 0.5 h) and 0.001 M (101 ± 1 h) using real wastewater were 29% and 21% shorter than 128 ± 1.5 h of the no QAC control. Coulombic efficiency increased by 95% from 37 ± 1% (control) to 72 ± 2% (0.01 M), while the startup was obviously inhibited up to 0.05 M due to its biotoxicity. Cyclic voltammetry reveals that 0.01 M had a 23% higher peak current density than the control with a broader redox window observed. High-throughput sequencing confirmed that QAC imposed a selective stress on anodic microbial community. This provides a simple method to accelerate BES startup for anodes that not be easily modified.

[1]  Aijie Wang,et al.  Syntrophic interactions improve power production in formic acid fed MFCs operated with set anode potentials or fixed resistances , 2012, Biotechnology and bioengineering.

[2]  Jurg Keller,et al.  Effects of surface charge and hydrophobicity on anodic biofilm formation, community composition, and current generation in bioelectrochemical systems. , 2013, Environmental science & technology.

[3]  Lu Lu,et al.  Microbial metabolism and community structure in response to bioelectrochemically enhanced remediation of petroleum hydrocarbon-contaminated soil. , 2014, Environmental science & technology.

[4]  Bruce E Logan,et al.  Examination of microbial fuel cell start-up times with domestic wastewater and additional amendments. , 2011, Bioresource technology.

[5]  C. Santoro,et al.  Surface Modification of Microbial Fuel Cells Anodes: Approaches to Practical Design , 2014 .

[6]  S. Pavlostathis,et al.  Quaternary ammonium disinfectants: microbial adaptation, degradation and ecology. , 2015, Current opinion in biotechnology.

[7]  Yujie Feng,et al.  Use of carbon mesh anodes and the effect of different pretreatment methods on power production in microbial fuel cells. , 2009, Environmental science & technology.

[8]  Y. Liu,et al.  A Highly Efficient Mixed-culture Biofilm as Anodic Catalyst and Insights into Its Enhancement through Electrochemistry by Comparison with G. sulfurreducens , 2015 .

[9]  Kenneth H. Nealson,et al.  A novel metatranscriptomic approach to identify gene expression dynamics during extracellular electron transfer , 2013, Nature Communications.

[10]  I. Goryanin,et al.  Novel Electrochemically Active Bacterium Phylogenetically Related to Arcobacter butzleri, Isolated from a Microbial Fuel Cell , 2009, Applied and Environmental Microbiology.

[11]  Eoin L. Brodie,et al.  A novel ecological role of the Firmicutes identified in thermophilic microbial fuel cells , 2008, The ISME Journal.

[12]  C. M. Li,et al.  Carbon nanotube/polyaniline composite as anode material for microbial fuel cells , 2007 .

[13]  Aijie Wang,et al.  Temporal-spatial changes in viabilities and electrochemical properties of anode biofilms. , 2015, Environmental science & technology.

[14]  Amandeep Kaur,et al.  Anode modification to improve the performance of a microbial fuel cell volatile fatty acid biosensor , 2014 .

[15]  S. Freguia,et al.  Surfactant treatment of carbon felt enhances anodic microbial electrocatalysis in bioelectrochemical systems , 2014 .

[16]  Keith Scott,et al.  Enhanced electricity production by use of reconstituted artificial consortia of estuarine bacteria grown as biofilms. , 2012, Environmental science & technology.

[17]  Sokhee P. Jung,et al.  Comparison of anode bacterial communities and performance in microbial fuel cells with different electron donors , 2007, Applied Microbiology and Biotechnology.

[18]  Willy Verstraete,et al.  Microbial Community Analysis of Anodes from Sediment Microbial Fuel Cells Powered by Rhizodeposits of Living Rice Plants , 2010, Applied and Environmental Microbiology.

[19]  Hang-Sik Shin,et al.  Variation of power generation at different buffer types and conductivities in single chamber microbial fuel cells. , 2010, Biosensors & bioelectronics.

[20]  D. Leech,et al.  Charge transport in films of Geobacter sulfurreducens on graphite electrodes as a function of film thickness. , 2014, Physical chemistry chemical physics : PCCP.

[21]  Nan Li,et al.  Accelerated OH(-) transport in activated carbon air cathode by modification of quaternary ammonium for microbial fuel cells. , 2014, Environmental science & technology.

[22]  Matthieu Picot,et al.  Graphite anode surface modification with controlled reduction of specific aryl diazonium salts for improved microbial fuel cells power output. , 2011, Biosensors & bioelectronics.

[23]  S. Denyer.  Mechanisms of action of antibacterial biocides. , 1995 .

[24]  C. Santoro,et al.  Influence of anode surface chemistry on microbial fuel cell operation. , 2015, Bioelectrochemistry.

[25]  Jian Sun,et al.  Voltammetry and Growth Physiology of Geobacter sulfurreducens Biofilms as a Function of Growth Stage and Imposed Electrode Potential , 2010 .

[26]  G. Gil,et al.  Operational parameters affecting the performannce of a mediator-less microbial fuel cell. , 2003, Biosensors & bioelectronics.

[27]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[28]  Rhonda R. Franklin,et al.  Linking spectral and electrochemical analysis to monitor c-type cytochrome redox status in living Geobacter sulfurreducens biofilms. , 2011, Chemphyschem : a European journal of chemical physics and physical chemistry.

[29]  Nanqi Ren,et al.  Pyrosequencing reveals highly diverse microbial communities in microbial electrolysis cells involved in enhanced H2 production from waste activated sludge. , 2012, Water research.

[30]  Hong Liu,et al.  Production of electricity during wastewater treatment using a single chamber microbial fuel cell. , 2004, Environmental science & technology.

[31]  Nan Li,et al.  Bifunctional quaternary ammonium compounds to inhibit biofilm growth and enhance performance for activated carbon air-cathode in microbial fuel cells , 2014 .

[32]  Orianna Bretschger,et al.  Microbial population and functional dynamics associated with surface potential and carbon metabolism , 2013, The ISME Journal.

[33]  R. Hozalski,et al.  Microbial Biofilm Voltammetry: Direct Electrochemical Characterization of Catalytic Electrode-Attached Biofilms , 2008, Applied and Environmental Microbiology.

[34]  Kenneth H. Nealson,et al.  Functionally Stable and Phylogenetically Diverse Microbial Enrichments from Microbial Fuel Cells during Wastewater Treatment , 2012, PloS one.

[35]  Korneel Rabaey,et al.  The diversity of techniques to study electrochemically active biofilms highlights the need for standardization. , 2012, ChemSusChem.