Porous ultrafine fibers via a salt-induced electrospinning method

A salt-induced electrospinning method to produce porous polymer ultrafine fibers was reported in this work. Scanning electron microscopy, energy dispersive spectrometer, and BET surface area measurement were employed to evaluate the morphology, the element distribution, and the surface area of fibers, respectively. According to the investigation result, pores on the fiber were induced by water-soluble salt during electrospinning process in a humid spinning environment. There was no porous structure on the fiber surface when water-insoluble salt was used in a wet electrospinning environment or when water-soluble salt was used in a dry electrospinning environment. Compared with pure fibers, the average surface area of fibers containing salt increased significantly due to the porous structure. The possible mechanism of the porous structure induced by salt was proposed. Water-solubility salt and humid environment were considered as the key roles in the formation of porous structure. This method provided a new way to form porous structure during electrospinning.

[1]  S. Armes,et al.  Polystyrene-silica nanocomposite particles via alcoholic dispersion polymerization using a cationic azo initiator. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[2]  Seeram Ramakrishna,et al.  Electrospun Nanofibers: Solving Global Issues , 2006 .

[3]  Shaoyun Guo,et al.  In‐process ultrasonic measurements of orientation and disorientation relaxation of high‐density polyethylene/polyamide‐6 composites with compatibilizer , 2010 .

[4]  Meifang Zhu,et al.  Soluble poly (aryl ether)s containing naphthalene pendant group: synthesis, characterization and electrospinning , 2010 .

[5]  Qingbiao Yang,et al.  A novel approach to prepare AgCl/PVP nanocomposite microspheres via electrospinning with sol–gel method , 2008 .

[6]  Geoffrey R. Mitchell,et al.  Development of orientation during electrospinning of fibres of poly(ε-caprolactone) , 2010 .

[7]  Jie Yang,et al.  Controlling internal nanostructures of porous microspheres prepared via electrospraying , 2010 .

[8]  Jeong Hyun Yeum,et al.  Electrospinning fabrication and characterization of poly(vinyl alcohol)/montmorillonite/silver hybrid nanofibers for antibacterial applications , 2009 .

[9]  C. V. van Blitterswijk,et al.  Integrating novel technologies to fabricate smart scaffolds , 2008, Journal of biomaterials science. Polymer edition.

[10]  Jie Yang,et al.  Electrosprayed Porous Microspheres for the Removal of Endocrine Disruptors , 2011 .

[11]  John M. Layman,et al.  Phospholipid Nonwoven Electrospun Membranes , 2006, Science.

[12]  S. Ramakrishna,et al.  Fabrication of porous electrospun nanofibres , 2006 .

[13]  Mariah D. Woodroof,et al.  Effect of platinum salt concentration on the electrospinning of polyacrylonitrile/platinum acetylacetonate solution , 2009 .

[14]  P. Dayal,et al.  Experimental and Theoretical Investigations of Porous Structure Formation in Electrospun Fibers , 2007 .

[15]  Y. Hsieh,et al.  Chitosan bicomponent nanofibers and nanoporous fibers. , 2006, Carbohydrate research.

[16]  Mohan Srinivasarao,et al.  Three-Dimensionally Ordered Array of Air Bubbles in a Polymer Film , 2001, Science.

[17]  Younan Xia,et al.  Putting Electrospun Nanofibers to Work for Biomedical Research. , 2008, Macromolecular rapid communications.

[18]  Xiaoyan Yuan,et al.  Encapsulation of proteinase K in PELA ultrafine fibers by emulsion electrospinning: preparation and in vitro evaluation , 2010 .

[19]  Xiangwu Zhang,et al.  Fabrication of porous carbon nanofibers and their application as anode materials for rechargeable lithium-ion batteries , 2009, Nanotechnology.

[20]  Xu Jiang,et al.  Current applications and future perspectives of artificial nerve conduits , 2010, Experimental Neurology.

[21]  S. Lee,et al.  Preparation of porous ultrafine PGA fibers via selective dissolution of electrospun PGA / PLA blend fibers , 2006 .

[22]  Andreas Greiner,et al.  Nanostructured Fibers via Electrospinning , 2001 .

[23]  Mehdi Afshari,et al.  Porous Nylon-6 Fibers via a Novel Salt-Induced Electrospinning Method , 2009 .

[24]  Y. Cho,et al.  Effect of Inorganic and Organic Salts on the Thermogelling Behavior of Poly(organophosphazenes) , 2006 .

[25]  Nancy G. Tassi,et al.  Controlling Surface Morphology of Electrospun Polystyrene Fibers: Effect of Humidity and Molecular Weight in the Electrospinning Process , 2004 .

[26]  Hai-Quan Mao,et al.  Electrospun scaffolds for stem cell engineering. , 2009, Advanced drug delivery reviews.

[27]  Derrick Dean,et al.  Nanostructured Biomaterials for Regenerative Medicine , 2006 .

[28]  John F. Rabolt,et al.  Micro- and Nanostructured Surface Morphology on Electrospun Polymer Fibers , 2002 .

[29]  M. Boyce,et al.  Morphology of Porous and Wrinkled Fibers of Polystyrene Electrospun from Dimethylformamide , 2009 .

[30]  Manit Nithitanakul,et al.  Ultrafine Electrospun Polyamide‐6 Fibers: Effect of Solution Conditions on Morphology and Average Fiber Diameter , 2004 .