High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances

[1]  Yongsheng Ma,et al.  Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing , 2020 .

[2]  C. Badini,et al.  Innovative processing route combining fused deposition modelling and laser writing for the manufacturing of multifunctional polyamide/carbon fiber composites , 2020, Materials & Design.

[3]  G. Zou,et al.  Performance of Short Fiber Interlayered Reinforcement Thermoplastic Resin in Additive Manufacturing , 2020, Materials.

[4]  J. M. Chacón,et al.  Mechanical and Geometric Performance of PLA-Based Polymer Composites Processed by the Fused Filament Fabrication Additive Manufacturing Technique , 2020, Materials.

[5]  L. Fambri,et al.  Fused Filament Fabrication of Piezoresistive Carbon Nanotubes Nanocomposites for Strain Monitoring , 2020, Frontiers in Materials.

[6]  Elena Verdejo de Toro,et al.  Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM). , 2020 .

[7]  L. Fambri,et al.  Development of new nanocomposites for 3D printing applications , 2020 .

[8]  S. Ozcan,et al.  Additively manufactured carbon fiber-reinforced composites: State of the art and perspective , 2020, Additive Manufacturing.

[9]  C. V. Singh,et al.  Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements , 2020 .

[10]  Xinyu Li,et al.  Anisotropy of poly(lactic acid)/carbon fiber composites prepared by fused deposition modeling , 2020 .

[11]  Garrett W. Melenka,et al.  3D printed continuous wire polymer composites strain sensors for structural health monitoring , 2019, Smart Materials and Structures.

[12]  S. Mcknight,et al.  Highly loaded fiber filled polymers for material extrusion: A review of current understanding , 2019 .

[13]  Gerald Pinter,et al.  Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication , 2019, Additive Manufacturing.

[14]  Qiushi Li,et al.  Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism , 2019, Polymers.

[15]  Anwarul Haque,et al.  Fracture toughness of additively manufactured carbon fiber reinforced composites , 2019, Additive Manufacturing.

[16]  A. Yousefi,et al.  Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament , 2019, Results in Physics.

[17]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[18]  Biao Wang,et al.  Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling , 2018 .

[19]  Ludwig Cardon,et al.  Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing , 2018, Composites Part A: Applied Science and Manufacturing.

[20]  F. Senatov,et al.  3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties , 2018 .

[21]  M. Longana,et al.  An investigation into 3D printing of fibre reinforced thermoplastic composites , 2018, Additive Manufacturing.

[22]  M. Czabaj,et al.  Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene , 2018, Additive Manufacturing.

[23]  T. Chou,et al.  Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling , 2018 .

[24]  Yuchuan Cheng,et al.  Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling , 2018 .

[25]  M. Longana,et al.  An investigation into 3 D printing of fi bre reinforced thermoplastic composites , 2018 .

[26]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[27]  R. T. L. Ferreira,et al.  Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers , 2017 .

[28]  Jason P. Carey,et al.  Characterizing short-fiber-reinforced composites produced using additive manufacturing , 2017 .

[29]  L. Love,et al.  Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials , 2017 .

[30]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[31]  L. Fambri,et al.  Fused deposition modelling with ABS–graphene nanocomposites , 2016 .

[32]  A. Leszczyńska,et al.  Bio-polyamides based on renewable raw materials , 2016, Journal of Thermal Analysis and Calorimetry.

[33]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[34]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters: a review of current research and future prospects , 2015, Advances in Manufacturing.

[35]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[36]  A. Iqbal,et al.  High performance thermoplastic composites: Study on the mechanical, thermal, and electrical resistivity properties of carbon fiber-reinforced polyetheretherketone and polyethersulphone , 2007 .

[37]  R. Vaidyanathan,et al.  Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication , 2003 .

[38]  K. Lozano,et al.  Nanofiber-reinforced polymers prepared by fused deposition modeling , 2003 .

[39]  L. Fambri,et al.  Gradient composites of alkaline poly(6-hexanelactam) with graphite: One-step synthesis, structure, and mechanical properties , 2001 .

[40]  T. Kawaguchi.  The dynamic mechanical properties of nylons , 1959 .