Evaluation of thermal conductivity for thermally insulated concretes

Abstract Passive energy-saving houses and buildings made of thermally insulated materials become popular in recent construction practices to address the demanding energy needs and to reduce the consumption of hydrocarbon energy resources. Thermally insulated concretes represent alternative construction materials to improve the thermal efficiency in a wide range of residential and commercial buildings. This study presents the experimental results of thermal conductivity values of lightweight concrete materials at ambient temperature conditions. Various lightweight aggregates and glass bubbles are selected as surrogates and replacement materials for coarse aggregates in order to reduce the thermal conduction in concretes. The linear and plane heat source methods are implemented to quantitatively obtain conductivity values for tested specimens. Results highlight that the thermal conductivity of concretes can be effectively reduced with increasing fraction of lightweight aggregates critically depending on the type of lightweight aggregates, thereby playing an important role in the thermal insulation. The addition of micro-meter sized hollow glass bubbles further decreases the thermal conductivity of specimens while its impact is less pronounced than the lightweight aggregates. The measurement of strength corroborates the soundness of mechanical applicability of tested concretes specimens as well.

[1]  A. G. Loudon.  The thermal properties of lightweight concretes , 1979 .

[2]  H. Lee,et al.  Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air , 2012 .

[3]  Danièle Revel,et al.  IPCC Special Report on Renewable Energy Sources and Climate Change Mitigation , 2011 .

[4]  T. D. Brown,et al.  The thermal conductivity of fresh concrete , 1970 .

[5]  J. Santamarina,et al.  Fundamental study of thermal conduction in dry soils , 2008 .

[6]  Tae Sup Yun,et al.  Thermal conductivity of hydrate‐bearing sediments , 2009 .

[7]  Soon-Ching Ng,et al.  Thermal conductivity of newspaper sandwiched aerated lightweight concrete panel , 2010 .

[8]  Krishpersad Manohar,et al.  Measurement of apparent thermal conductivity by the thermal probe method , 2000 .

[9]  P. T. Tsilingiris.  On the thermal time constant of structural walls , 2004 .

[10]  S. A. Al-Sanea,et al.  Effect of masonry material and surface absorptivity on critical thermal mass in insulated building walls , 2013 .

[11]  Joseph F. Lamond,et al.  Significance of Tests and Properties of Concrete and Concrete-Making Materials , 1994 .

[12]  Viktor Dorer,et al.  Re-inventing air heating: Convenient and comfortable within the frame of the Passive House concept , 2005 .

[13]  William F. Waite,et al.  Simultaneous determination of thermal conductivity, thermal diffusivity and specific heat in sI methane hydrate , 2007 .

[14]  Jin-keun Kim,et al.  An experimental study on thermal conductivity of concrete , 2003 .

[15]  lin-shu wang,et al.  Effective heat capacity of interior planar thermal mass (iPTM) subject to periodic heating and cooling , 2012 .

[16]  Almir Sales,et al.  Lightweight composite concrete produced with water treatment sludge and sawdust: Thermal properties and potential application , 2010 .

[17]  Jong-hwan Kim,et al.  Thermo-physical properties and transient heat transfer of concrete at elevated temperatures , 2002 .

[18]  Jean-Luc Bodnar,et al.  Artificial intelligence tools and inverse methods for estimating the thermal diffusivity of building , 2011 .