Design a Microstrip Patch Antenna with Electronic Band gap Structure for Wireless Devices

To design a compact microstrip patch antenna for use in wireless/cellular devices. A typical cellular phone measures about 14.5 cm by 4.5 cm. Hence the antenna designed must be able to fit in such a cellular phone. I have to design a compact microstrip patch antenna having a center frequency of 2.5 GHz accordingly to reach the design and results. The ground plane dimensions for the patch antenna has been designed to be 28 mm by 28 mm and the patch dimensions are 28 mm by 28 mm. Hence the antenna is compact enough to be placed in a typical cellular phone. I have to plot the radiation pattern for the desired antenna orientation and back lobe radiation also to be reduced.

[1]  G. Thiele,et al.  Antenna theory and design , 1981 .

[2]  Shobhit K. Patel,et al.  Design of Microstrip Meandered Patch Antenna for Mobile Communication , 2011 .

[3]  Rod Waterhouse,et al.  Microstrip Patch Antennas , 2018, Handbook of Antennas in Wireless Communications.

[4]  M. Kivikoski,et al.  WEBGA - wearable electromagnetic band-gap antenna , 2004, IEEE Antennas and Propagation Society Symposium, 2004..

[5]  Kwai-Man Luk,et al.  Design of a circularly-polarized vertical patch antenna , 2006 .

[6]  Ronghong Jin,et al.  E-Shape Patch With Wideband and Circular Polarization for Millimeter-Wave Communication , 2008, IEEE Transactions on Antennas and Propagation.

[7]  Y.P. Zhang,et al.  Theory and analysis of differentially-driven microstrip antennas , 2006, IEEE Transactions on Antennas and Propagation.

[8]  R. Garg,et al.  Microstrip Antenna Design Handbook , 2000 .