Design of linear thruster with a solid arc-shaped mover used by tanker aircraft

In this paper, an electric drive linear thruster is proposed, which is used to control the stretching and shrinking of the oil tube for the tanker aircraft. The major difficulty of this design is to minimize the volume and the weight of the electric actuator. After comparing the advantages and disadvantages of linear induction thruster with those of permanent magnet linear synchronous thruster, a curved-solid mover asynchronous linear thruster is presented, which reduces the volume and the weight of the device greatly by using the aluminum protection sleeve of the oil tube as the mover and also the secondary. In order to improve the output capability of the thruster, back iron with high permeability is added between the aluminum sleeve and oil tube. After that, the influence of the parameters of the air gap and back iron on the output capability of the thruster is analyzed and then the final scheme is determined. At last, simulation and analysis on the temperature rise of the mover and oil tube under different cooling air speed conditions is done to verify the security and practicability of the scheme.

[1]  K. Idir,et al.  Modeling and performance of linear induction motor with saturable primary , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[2]  J. F. Gieras.  Analytical method of calculating the electromagnetic field and power losses in ferromagnetic halfspace, taking into account saturation and hysteresis , 1977 .

[3]  Wenjiang Yang,et al.  Potential Development of Linear Motors for Unmanned Air Vehicles , 2010, IEEE Transactions on Applied Superconductivity.

[4]  Wei Xu,et al.  Performance study on high power linear induction motor in transportation , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[5]  Amir Zare Bazghaleh,et al.  Optimum Design of Single-Sided Linear Induction Motors for Improved Motor Performance , 2010, IEEE Transactions on Magnetics.

[6]  Qinfen Lu,et al.  Performance study on linear induction motor used by amusement equipment based on FEM , 2005, 2005 International Conference on Electrical Machines and Systems.

[7]  Tong Yang,et al.  Finite element analysis of linear induction motor for transportation systems , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[8]  Fan Yu,et al.  The analytical calculation of the thrust and normal force and force analyses for linear induction motor , 2008, 2008 9th International Conference on Signal Processing.

[9]  M. Innocenti,et al.  Vision-Based Autonomous Probe and Drogue Aerial Refueling , 2006, 2006 14th Mediterranean Conference on Control and Automation.

[10]  Jacek F. Gieras,et al.  Performance calculation for single-sided linear induction motors with a solid steel reaction plate under constant current excitation , 1985 .