Failure mechanism of underwater shield tunnel: An experimental and theoretical study

[1]  Jing-Xuan Zhang,et al.  Numerical investigation of the compression–bending stiffness of segmental joints with different types of joint surfaces , 2023, Tunnelling and Underground Space Technology.

[2]  Chi Zhang,et al.  Full-scale experimental study on failure characteristics of the key segment in shield tunnel with super-large cross-section , 2022, Tunnelling and Underground Space Technology.

[3]  Qiang-bing Huang,et al.  Deformation and failure analysis of metro shield tunnel induced by active ground fissure in Xi'an, China , 2022, Engineering Failure Analysis.

[4]  Ming-feng Lei,et al.  Investigation of ultimate bearing capacity of shield tunnel based on concrete damage model , 2022, Tunnelling and Underground Space Technology.

[5]  D. Yuan,et al.  Short-Term and Long-Term Displacement of Surface and Shield Tunnel in Soft Soil: Field Observations and Numerical Modeling , 2022, Applied Sciences.

[6]  Jinjie Zhao,et al.  Study on Mechanical Characteristics of Segmental Joints of a Large-Diameter Shield Tunnel under Ultrahigh Water Pressure , 2021, Sensors.

[7]  Chuan He,et al.  Analysis on the stiffness iteration of segmental joints in segmental linings: Method and sensitivity analysis , 2021 .

[8]  H. Chuan,et al.  PROTOTYPE TEST OF A NEW TYPE SEGMENT STRUCTURE WITH DISTRIBUTED MORTISES AND TENONS FOR SHIELD TUNNEL , 2021 .

[9]  Q. Gong,et al.  Model test study on the stability of cobble strata during shield under-crossing , 2021 .

[10]  J. W. Ju,et al.  Full scale tests and a progressive failure model to simulate full mechanical behavior of concrete tunnel segmental lining joints , 2021 .

[11]  Hong-wei Huang,et al.  Modified analytical solution of shield tunnel lining considering nonlinear bending stiffness of longitudinal joint , 2020 .

[12]  Chuan He,et al.  Refined three‐dimensional numerical model for segmental joint and its application , 2020, Structural Concrete.

[13]  Chuan He,et al.  Failure tests and bearing performance of prototype segmental linings of shield tunnel under high water pressure , 2019, Tunnelling and Underground Space Technology.

[14]  Shunhua Zhou,et al.  Research on Mechanics of Longitudinal Joint in Shield Tunnel by the Nonlinear Spring Equivalent Method , 2019, KSCE Journal of Civil Engineering.

[15]  Ren-peng Chen,et al.  Centrifugal model tests on face failure of earth pressure balance shield induced by steady state seepage in saturated sandy silt ground , 2018, Tunnelling and Underground Space Technology.

[16]  Xian Liu,et al.  Mechanical behavior of quasi-rectangular segmental tunnel linings: Further insights from full-scale ring tests , 2018, Tunnelling and Underground Space Technology.

[17]  Zila Rinaldi,et al.  Collapse load of a masonry arch after actual displacements of the supports , 2018 .

[18]  Weiqi Wang,et al.  Full-scale tests on bending behavior of segmental joints for large underwater shield tunnels , 2018 .

[19]  Qixiang Yan,et al.  Numerical analysis of the cracking and failure behaviors of segmental lining structure of an underwater shield tunnel subjected to a derailed high-speed train impact , 2018 .

[20]  Kairong Hong,et al.  Typical Underwater Tunnels in the Mainland of China and Related Tunneling Technologies , 2017 .

[21]  Jatziri Y. Moreno-Martínez,et al.  Effect of TBM Advance in the Structural Response of Segmental Tunnel Lining , 2017 .

[22]  Xian Liu,et al.  Investigation of the structural effect induced by stagger joints in segmental tunnel linings: First results from full-scale ring tests , 2017 .

[23]  Xian Liu,et al.  Experimental investigation of the ultimate bearing capacity of continuously jointed segmental tunnel linings , 2016 .

[24]  Zila Rinaldi,et al.  Collapse displacements for a mechanism of spreading-induced supports in a masonry arch , 2015 .

[25]  Hehua Zhu,et al.  Experimental and analytical study on longitudinal joint opening of concrete segmental lining , 2015 .

[26]  Haukur Ingason,et al.  Model scale tunnel fire tests with automatic sprinkler , 2013 .

[27]  Chuan He,et al.  Study on the Mechanical Behavior of Lining Structure for Underwater Shield Tunnel of High-Speed Railway , 2013 .

[28]  Hehua Zhu,et al.  Full-scale testing and modeling of the mechanical behavior of shield TBM tunnel joints , 2013 .

[29]  Climent Molins,et al.  Experimental and analytical study of the structural response of segmental tunnel linings based on an in situ loading test. Part 2: Numerical simulation , 2011 .

[30]  Graham H. Powell,et al.  Seismic damage prediction by deterministic methods: Concepts and procedures , 1988 .

[31]  H. Murakami,et al.  ON THE BEHAVIOUR OF THE TRANSVERSE JOINTS OF A SEGMENT , 1980 .

[32]  Yaolin Yi,et al.  General solutions for the longitudinal deformation of shield tunnels with multiple discontinuities in strata , 2021 .

[33]  Chao Wu,et al.  Study on the Mechanical Behavior and the Model Test of Segmental Linings for the Shield Tunnel Undercrossing the Yellow River , 2016 .

[34]  Su Zongxian,et al.  DEVELOPMENT AND APPLICATION OF LOADING TEST SYSTEM OF PROTOTYPE STRUCTURE FOR UNDERWATER SHIELD TUNNEL WITH LARGE CROSS-SECTION , 2011 .

[35]  Wang Mengshu,et al.  CURRENT DEVELOPMENTS AND TECHNICAL ISSUES OF UNDERWATER TRAFFIC TUNNEL—DISCUSSION ON CONSTRUCTION SCHEME OF TAIWAN STRAIT UNDERSEA RAILWAY TUNNEL , 2008 .

[36]  Lu Liang,et al.  A Loading Method of the Test for Lining Whole Wreath of Shanghai Chongming Tunnel , 2006 .

[37]  N. Kondo,et al.  Development and application of the DPLEX shield method: Results of experiments using shield and segment models and application of the method in tunnel construction , 1996 .