Characterization and thermal performance evaluation of infrared reflective coatings compatible with historic buildings

Abstract Two infrared reflective coatings recently developed as part of the EFFESUS European research project are characterized and evaluated in this paper. Thermal performance, durability, compatibility with historic fabric, and reversibility are all analysed. The results of extensive research that include laboratory analysis of selected substrates, measurements on a large-scale traditional masonry mock-up, thermodynamic simulations, and finally application in to a real historic building in Istanbul, all support the potential of the new coatings to improve the thermal performance of historic buildings, in keeping with their visual integrity and cultural value. Besides their reflective properties, proven by the thermal stress reductions on the treated surfaces, the new coatings are characterized by low visual impact, easy application, material compatibility, and reversibility after application, as well as durability over time.

[1]  Alexandra Troi,et al.  The “Cost Optimality” Approach for the Internal Insulation of Historic Buildings , 2017 .

[2]  Maria Concetta Di Tuccio,et al.  Thermal performance evaluation and comfort assessment of advanced aerogel as blown-in insulation for historic buildings , 2017 .

[3]  David J. Sailor,et al.  Mitigation of urban heat islands: materials, utility programs, updates , 1995 .

[4]  Rajendra Singh Adhikari,et al.  Experimental Measurements on Thermal Transmittance of the Opaque Vertical Walls in the Historical Buildings , 2012 .

[5]  M. Santamouris,et al.  Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions , 2011 .

[6]  M. Santamouris,et al.  A study of the thermal performance of reflective coatings for the urban environment , 2006 .

[7]  Anna Laura Pisello,et al.  The thermal effect of an innovative cool roof on residential buildings in Italy: Results from two years of continuous monitoring , 2014 .

[8]  J. Delgado Rodrigues,et al.  Indicators and ratings for the compatibility assessment of conservation actions , 2007 .

[9]  A. Pisello.  State of the art on the development of cool coatings for buildings and cities , 2017 .

[10]  Hüsamettin Bulut,et al.  Generation of typical solar radiation data for İstanbul, Turkey , 2003 .

[11]  H. Akbari,et al.  Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions , 2007 .

[12]  Mathias Cehlin,et al.  Reflective coatings for interior and exterior of buildings and improving thermal performance , 2013 .

[13]  Sarah Bretz,et al.  Preliminary survey of the solar reflectance of cool roofing materials , 1997 .

[14]  Zafer Aslan,et al.  Study of hourly solar radiation data in Istanbul , 1995 .

[15]  Paul Berdahl,et al.  Building energy efficiency and fire safety aspects of reflective coatings , 1995 .

[16]  Athanasios Tzempelikos,et al.  The effect of reflective coatings on building surface temperatures, indoor environment and energy co , 2011 .

[17]  Dionysia Kolokotsa,et al.  On the impact of urban overheating and extreme climatic conditions on housing, energy, comfort and environmental quality of vulnerable population in Europe , 2015 .

[18]  H. Akbari,et al.  Effect of aging processes on solar reflectivity of clay roof tiles , 2014 .

[19]  A. Pisello,et al.  Albedo control as an effective strategy to tackle Global Warming: A case study , 2014 .

[20]  H. Hirashima,et al.  Preparation of MTMS based transparent superhydrophobic silica films by sol-gel method. , 2009, Journal of colloid and interface science.

[21]  Xiaoxin Wang,et al.  Dynamic thermal simulation of a retail shed with solar reflective coatings , 2008 .