Effect of cellulosic fillers addition on curing and adhesion strength of moisture-curing one-component polyurethane adhesives
暂无分享,去创建一个
[1] Sandeep S. Nair,et al. Lignin containing cellulose nanofibril application in pMDI wood adhesives for drastically improved gap-filling properties with robust bondline interfaces , 2019, Chemical Engineering Journal.
[2] T. Mandal,et al. Commercial application of cellulose nano-composites – A review , 2019, Biotechnology reports.
[3] N. Yan,et al. Application of Western red cedar (Thuja plicata) tree bark as a functional filler in pMDI wood adhesives , 2018 .
[4] G. Pans,et al. Use of lignin in polyurethane-based structural wood adhesives , 2018 .
[5] Jihoon Shin,et al. Tunable softening and toughening of individualized cellulose nanofibers-polyurethane urea elastomer composites. , 2017, Carbohydrate polymers.
[6] D. Trache,et al. Microcrystalline cellulose: Isolation, characterization and bio-composites application-A review. , 2016, International journal of biological macromolecules.
[7] E. S. Ali,et al. Effect of surface treatments on the durability of green polyurethane adhesive bonded aluminium alloy , 2014 .
[8] W. Possart,et al. Adhesion of polyurethanes on native metal surfaces – stability and the role of urea-like species , 2014 .
[9] Haining Na,et al. How does epoxidized soybean oil improve the toughness of microcrystalline cellulose filled polylactide acid composites , 2014 .
[10] He Liu,et al. Properties of rosin-based waterborne polyurethanes/cellulose nanocrystals composites. , 2013, Carbohydrate polymers.
[11] Jiyu He,et al. Study of the synthesis and bonding properties of reactive hot‐melt polyurethane adhesive , 2012 .
[12] Karthikeyan D. Ramachandriya,et al. Effects of cellulose, hemicellulose and lignin on thermochemical conversion characteristics of the selected biomass. , 2012, Bioresource technology.
[13] X. Ren,et al. Modified cellulose films with controlled permeatability and biodegradability by crosslinking with toluene diisocyanate under homogeneous conditions , 2012 .
[14] M. Martínez,et al. Epoxy Composite Reinforced with Nano and Micro SiC Particles: Curing Kinetics and Mechanical Properties , 2012 .
[15] P. Niemz,et al. Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymers , 2011 .
[16] M. Banea,et al. Mechanical Characterization of Flexible Adhesives , 2009 .
[17] Milan Sernek,et al. Shear strength development of the phenol–formaldehyde adhesive bond during cure , 2009, Wood Science and Technology.
[18] K. Poduska,et al. Roughness effects on contact angle measurements , 2008 .
[19] Qiuju Wu,et al. A high strength nanocomposite based on microcrystalline cellulose and polyurethane. , 2007, Biomacromolecules.
[20] D. J. Varacalle,et al. Effect of grit-blasting on substrate roughness and coating adhesion , 2006 .
[21] Ana Luísa Daniel da Silva,et al. Influence of the free isocyanate content in the adhesive properties of reactive trifunctional polyether urethane quasi-prepolymers , 2006 .
[22] M. Hawley,et al. A study of microwave reaction rate enhancement effect in adhesive bonding of polymers and composites , 2003 .
[23] J. Fernández-García,et al. Rheological properties of thermoplastic polyurethane adhesive solutions containing fumed silicas of different surface areas , 1999 .
[24] Noel L. Owen,et al. Isocyanate-Wood Adhesive Bond , 1995 .
[25] H. Khoramishad,et al. Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes , 2018 .
[26] Cyril Aymonier,et al. Thermogravimetric analysis as a new method to determine the lignocellulosic composition of biomass. , 2011 .
[27] B. Burchardt. Advances in polyurethane structural adhesives , 2010 .
[28] B. Burchardt,et al. Elastic Bonding and Sealing in Industry , 2006 .
[29] M. Sánchez-Adsuar. Influence of the composition on the crystallinity and adhesion properties of thermoplastic polyurethane elastomers , 2000 .