Regenerative medicine bioprocessing: Concentration and behavior of adherent cell suspensions and pastes

Regenerative medicines based on human cells demand their harvesting, culture, and processing. Manufacturing processes are likely to include cell concentration and subsequent controlled dosing of concentrates, for example, to the patient or tissue construct. The integrity and functionality of the cells must be maintained during these processing stages. In this study the performance of two different cell concentration protocols (involving centrifugation and resuspension) are compared and consideration given to possible causes of cell loss. Further studies examine cell size and rheological behavior of anchorage‐dependent mammalian cell suspensions, and the effect of capillary flow stress (0.5–15 Pa, laminar flow regime) on cell number and membrane integrity as quantified by flow cytometry. The cell concentration protocols achieved maximum cell volume fraction of around 0.3 and the improved protocol exhibited intact cell yield of 80 ± 13%, demonstrating proof‐of principle for achieving tissue‐like cell concentrations by a process of centrifugation and orbital shaking. Volume mean cell diameter (cell diameter at the mean cell volume) for the rat aortic smooth muscle cells (CRL‐1444) used in this study was 22.4 µm. Concentrated cell suspension rheology approximated to power law behavior and exhibited similar trends to reports for plant and yeast cells. Capillary transfer at 2–15 Pa (wall shear stress) did not significantly affect cell number or membrane integrity while losses observed at low shear (0.5, 1.0 Pa) were probably due to surface attachment of cells in the apparatus. Biotechnol. Bioeng. 2009;103: 1236–1247. © 2009 Wiley Periodicals, Inc.

[1]  N Ohshima,et al.  Novel cell immobilization method utilizing centrifugal force to achieve high-density hepatocyte culture in porous scaffold. , 2001, Journal of biomedical materials research.

[2]  E Bell,et al.  A blood vessel model constructed from collagen and cultured vascular cells. , 1986, Science.

[3]  Chris Mason,et al.  Regenerative medicine bioprocessing: building a conceptual framework based on early studies. , 2006, Tissue engineering.

[4]  R L Macmillan,et al.  The Error of the Red Cell Count , 1948, Journal of clinical pathology.

[5]  Shangtian Yang,et al.  Effects of Filtration Seeding on Cell Density, Spatial Distribution, and Proliferation in Nonwoven Fibrous Matrices , 2001, Biotechnology progress.

[6]  Jenneke Klein-Nulend,et al.  Adipose tissue-derived mesenchymal stem cells acquire bone cell-like responsiveness to fluid shear stress on osteogenic stimulation. , 2005, Tissue engineering.

[7]  G. Kretzmer.  Influence of stress on adherent cells. , 2000, Advances in biochemical engineering/biotechnology.

[8]  G. Matijašić,et al.  Influence of Dispersed Phase Characteristics on Rheological Behavior of Suspensions , 2002 .

[9]  C. A. Kent,et al.  Evaluation of cell numbers and viability of Saccharomyces cerevisiae by different counting methods , 1999 .

[10]  M. Hoare,et al.  The impact of process stress on suspended anchorage‐dependent mammalian cells as an indicator of likely challenges for regenerative medicines , 2008, Biotechnology and bioengineering.

[11]  M. Reuss,et al.  Viscosity of yeast suspensions , 1979, European journal of applied microbiology and biotechnology.

[12]  D. Wendt,et al.  Oscillating perfusion of cell suspensions through three‐dimensional scaffolds enhances cell seeding efficiency and uniformity , 2003, Biotechnology and bioengineering.

[13]  Peter W Zandstra,et al.  Shear‐Controlled Single‐Step Mouse Embryonic Stem Cell Expansion and Embryoid Body–Based Differentiation , 2005, Stem cells.

[14]  S. Pratsinis,et al.  Particle size distributions and viscosity of suspensions undergoing shear-induced coagulation and fragmentation , 2003 .

[15]  I Schmid,et al.  Dead cell discrimination with 7-amino-actinomycin D in combination with dual color immunofluorescence in single laser flow cytometry. , 1992, Cytometry.

[16]  K. Shakesheff,et al.  The effect of delivery via narrow-bore needles on mesenchymal cells. , 2009, Regenerative medicine.

[17]  James J. Yoo,et al.  Tissue-engineered autologous bladders for patients needing cystoplasty , 2006, The Lancet.

[18]  A H Emery,et al.  Plant cell suspension culture rheology , 1993, Biotechnology and bioengineering.

[19]  Mike Hoare,et al.  Regenerative medicine bioprocessing: the need to learn from the experience of other fields. , 2006, Regenerative medicine.

[20]  H. Usui,et al.  Non-Newtonian viscosity of dense slurries prepared by spherical particles , 2001 .

[21]  Smadar Cohen,et al.  Optimization of cardiac cell seeding and distribution in 3D porous alginate scaffolds. , 2002, Biotechnology and bioengineering.

[22]  Milica Radisic,et al.  High-density seeding of myocyte cells for cardiac tissue engineering. , 2003, Biotechnology and bioengineering.

[23]  D D Ryu,et al.  Effects of rheological properties and mass transfer on plant cell bioreactor performance: Production of tropane alkaloids , 1993, Biotechnology and bioengineering.

[24]  K. Niranjan,et al.  Observations on the shear damage to different animal cells in a concentric cylinder viscometer. , 2000, Biotechnology and bioengineering.

[25]  G. Truskey,et al.  A numerical analysis of forces exerted by laminar flow on spreading cells in a parallel plate flow chamber assay , 1993, Biotechnology and bioengineering.

[26]  P. Anversa,et al.  Morphometry of medial hypertrophy in the rat thoracic aorta. , 1980, Laboratory investigation; a journal of technical methods and pathology.

[27]  Y. Chisti,et al.  Hydrodynamic Damage to Animal Cells , 2001, Critical reviews in biotechnology.

[28]  M. Al‐Rubeai,et al.  A rapid method for evaluation of cell number and viability by flow cytometry , 1997, Cytotechnology.

[29]  Peter Dunnill,et al.  Behavior of adult human mesenchymal stem cells entrapped in alginate-GRGDY beads. , 2006, Tissue engineering.

[30]  Z. Darżynkiewicz,et al.  Assays of cell viability: discrimination of cells dying by apoptosis. , 1994, Methods in cell biology.

[31]  M Al-Rubeai,et al.  Estimation of disruption of animal cells by laminar shear stress , 1992, Biotechnology and bioengineering.

[32]  P. Mills,et al.  RHEOLOGY OF CONCENTRATED SUSPENSIONS OF VISCOELASTIC PARTICLES , 1999 .

[33]  D. Mooney,et al.  Hydrogels for tissue engineering. , 2001, Chemical Reviews.