Tungsten-Microhotplate-Array-Based Pirani Vacuum Sensor System With On-Chip Digital Front-End Processor

An integrated CMOS-compatible Pirani vacuum sensor system has been developed in this paper, which consists of a tungsten microhotplate array with four same microhotplates in series, a constant current circuit, an 8-b A/D converter, and a digital interface. With a tiny amount of the external components, a gas pressure between 10-1 and 105 Pa can be sampled, digitized, and real-time displayed by a LED. It can also be transferred to an external process unit, which makes it suitable for application in a gas pressure control system. The sensor system is implemented in a 0.5-μm CMOS process. When the sensor system works at 5-V voltage and 2.5-MHz clock input, the total power consumption is 350 mW, and the temperature increase of each microhotplate is 35°C.

[1]  O. Brand,et al.  Micromachined thermally based CMOS microsensors , 1998, Proc. IEEE.

[2]  Marco Doms,et al.  A microfabricated Pirani pressure sensor operating near atmospheric pressure , 2005 .

[3]  Gregory T. A. Kovacs,et al.  Integrated thermal-conductivity vacuum sensor , 1997 .

[4]  Oliver Paul,et al.  Novel fully CMOS-compatible vacuum sensor , 1995 .

[5]  Carlos H. Mastrangelo,et al.  Microfabricated thermal absolute-pressure sensor with on-chip digital front-end processor , 1991 .

[6]  Khalil Najafi,et al.  A micromachined Pirani gauge with dual heat sinks , 2005 .

[7]  Fengtian Zhang,et al.  A micro-Pirani vacuum gauge based on micro-hotplate technology , 2006 .

[8]  Jin-Shown Shie,et al.  High performance Pirani vacuum gauge , 1995 .

[9]  Emile Martincic,et al.  Micro Pirani vacuum gauges manufactured by a film transfer process , 2010 .

[10]  T. Akin,et al.  Pirani Vacuum Gauges Using Silicon-on-Glass and Dissolved-Wafer Processes for the Characterization of MEMS Vacuum Packaging , 2009, IEEE Sensors Journal.

[11]  K. Najafi,et al.  An improved performance poly Si Pirani vacuum gauge using heat distributing structural supports , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[12]  I-Ming Hsing,et al.  An improved TMAH Si-etching solution without attacking exposed aluminum , 2000 .

[13]  Albert M. Leung,et al.  The nanogap Pirani-a pressure sensor with superior linearity in an atmospheric pressure range , 2009 .

[14]  M. Quirk,et al.  Semiconductor manufacturing technology , 2000 .

[15]  Pasqualina M. Sarro,et al.  Double‐beam integrated thermal vacuum sensor , 1987 .

[16]  Junseok Chae,et al.  Fabrication and Characterization of a Wafer-Level MEMS Vacuum Package With Vertical Feedthroughs , 2008, Journal of Microelectromechanical Systems.

[17]  Jinfeng Li,et al.  A MicroPirani Pressure Sensor Based on the Tungsten Microhotplate in a Standard CMOS Process , 2009, IEEE Transactions on Industrial Electronics.

[18]  Zhenan Tang,et al.  A Fully CMOS-Compatible Micro-Pirani Gauge based on a Constant Current , 2009, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems.