Effect of Carbon Nanotube Aspect Ratio on the Thermal and Electrical Properties of Epoxy Nanocomposites

Abstract The novel properties of carbon nanotubes have generated much interest in polymer nanocomposites. The thermal and electrical properties of multi-walled carbon nanotube-epoxy composites were investigated both experimentally and theoretically. Experiments were performed to evaluate the effect of the aspect ratio of carbon nanotubes. Comparisons were made between the results obtained for the nanocomposite materials containing carbon nanotubes with a high (800) and a low (80) aspect ratios. Design recommendations were made, and potential applications were also discussed. It was shown that the aspect ratio plays an important in determining the physical properties of the epoxy nanocomposite. The electrical conductivity of the nanocomposite is highly dependent on the aspect ratio of carbon nanotubes. In contrast, the aspect ratio plays a considerable role in the thermal conductivity of the nanocomposite. Carbon nanotubes have clearly demonstrated their capability as thermally and electrically conductive fillers in epoxy nanocomposites. In contrast to the orders of magnitude enhancement in electrical conductivity with a very low loading of carbon nanotubes, the thermal conductivity of the nanocomposite has shown only moderate improvement. The improvement in physical properties of the nanocomposite can be interpreted in terms of carbon nanotube networks.

[1]  Z. Dang,et al.  Influence of carbon nanotube dimensions on the percolation characteristics of carbon nanotube/polymer composites , 2014 .

[2]  Young-Seak Lee,et al.  Improved mechanical and electromagnetic interference shielding properties of epoxy composites through the introduction of oxyfluorinated multiwalled carbon nanotubes , 2017 .

[3]  R. Tandon,et al.  Electrical and EMI shielding characterization of multiwalled carbon nanotube/polystyrene composites , 2014 .

[4]  A. Fina,et al.  Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review , 2011 .

[5]  Y. Huang,et al.  Thermal Conductivity of Polymer-Based Composites: Fundamentals and Applications , 2016 .

[6]  I. Kinloch,et al.  Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites , 2003 .

[7]  Q. Zheng,et al.  Interaction models for effective thermal and electric conductivities of carbon nanotube composites , 2009 .

[8]  M. Shariati,et al.  The effect of carbon nanotube dispersion on the dynamic characteristics of unidirectional hybrid composites: An experimental approach , 2017 .

[9]  Ayesha Kausar,et al.  Effectiveness of Polystyrene/Carbon Nanotube Composite in Electromagnetic Interference Shielding Materials: A Review , 2017 .

[10]  D. Ruch,et al.  Review of thermal conductivity in composites: Mechanisms, parameters and theory , 2016 .

[11]  Sadegh Imani Yengejeh,et al.  Carbon nanotubes as reinforcement in composites: A review of the analytical, numerical and experimental approaches , 2017 .

[12]  I. Kašalynas,et al.  Soft cutting of single-wall carbon nanotubes by low temperature ultrasonication in a mixture of sulfuric and nitric acids , 2012, Nanotechnology.

[13]  M. Kaseem,et al.  Fabrication and materials properties of polystyrene/carbon nanotube (PS/CNT) composites: A review , 2016 .

[14]  Zhenan Bao,et al.  Conjugated polymer sorting of semiconducting carbon nanotubes and their electronic applications , 2015 .

[15]  Quanshui Zheng,et al.  Effects of anisotropy, aspect ratio, and nonstraightness of carbon nanotubes on thermal conductivity of carbon nanotube composites , 2007 .

[16]  J. Bai,et al.  Effect of the length and the aggregate size of MWNTs on the improvement efficiency of the mechanical and electrical properties of nanocomposites—experimental investigation , 2003 .

[17]  O. Lame,et al.  Impact of carbon nanotube prelocalization on the ultra-low electrical percolation threshold and on the mechanical behavior of sintered UHMWPE-based nanocomposites , 2017 .

[18]  Scott T. Huxtable,et al.  Interfacial heat flow in carbon nanotube suspensions , 2003, Nature materials.

[19]  Gaurav Pandey,et al.  Carbon Nanotube-Based Multifunctional Polymer Nanocomposites , 2012 .

[20]  Polina Kuzhir,et al.  Broadband dielectric/electric properties of epoxy thin films filled with multiwalled carbon nanotubes , 2013 .

[21]  Ghanshyam Pal,et al.  Modeling of carbon nanotubes and carbon nanotube-polymer composites , 2016 .

[22]  C. Nakason,et al.  Influence of critical carbon nanotube loading on mechanical and electrical properties of epoxidized natural rubber nanocomposites , 2018 .

[23]  K. Rhee,et al.  A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites , 2015 .

[24]  Gintaras Valušis,et al.  Microwave probing of nanocarbon based epoxy resin composite films: Toward electromagnetic shielding , 2011 .

[25]  K. Koziol,et al.  Length-dependent electrical and thermal properties of carbon nanotube-loaded epoxy nanocomposites , 2013 .

[26]  Chul B. Park,et al.  Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications. , 2018, ACS applied materials & interfaces.

[27]  J. Jyoti,et al.  Enhanced thermomechanical and electrical properties of multiwalled carbon nanotube paper reinforced epoxy laminar composites , 2018 .

[28]  W. Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[29]  Jianyu Zhang,et al.  Investigation on the interfacial mechanical properties of hybrid graphene-carbon nanotube/polymer nanocomposites , 2017 .

[30]  J. M. Kikkawa,et al.  Very Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy Composites , 2005 .

[31]  N. Sahoo,et al.  Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene , 2017 .

[32]  M. Kaseem,et al.  A review on recent researches on polylactic acid/carbon nanotube composites , 2017, Polymer Bulletin.

[33]  F. Avilés,et al.  Thermoresistive mechanisms of carbon nanotube/polymer composites , 2018 .

[34]  Dongzhi Yang,et al.  Simultaneous Enhancements in Toughness and Electrical Conductivity of Polypropylene/Carbon Nanotube Nanocomposites by Incorporation of Electrically Inert Calcium Carbonate Nanoparticles , 2017 .

[35]  C. Balasubramanian,et al.  CNT composites for aerospace applications , 2006, 2007 Cleantech Conference and Trade Show Cleantech 2007.

[36]  Seyyed Shayan Meysami,et al.  The effect of multi-wall carbon nanotube morphology on electrical and mechanical properties of polyurethane nanocomposites , 2017 .

[37]  G. Tobias,et al.  Exploring different doping mechanisms in thermoelectric polymer/carbon nanotube composites , 2017 .

[38]  A. Tagliaferro,et al.  Conductivity in carbon nanotube polymer composites: A comparison between model and experiment , 2016 .

[39]  D. Tasis,et al.  Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties , 2010 .

[40]  A. Shah,et al.  Effect of the carbon nanotube size dispersity on the electrical properties and pressure sensing of the polymer composites , 2016, Journal of Materials Science.

[41]  Y. Gun’ko,et al.  Recent Advances in Research on Carbon Nanotube–Polymer Composites , 2010, Advanced materials.

[42]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[43]  Huamin Zhou,et al.  Simulation of dispersion and alignment of carbon nanotubes in polymer flow using dissipative particle dynamics , 2017 .

[44]  S. Maiti,et al.  Polystyrene/MWCNT/graphite nanoplate nanocomposites: efficient electromagnetic interference shielding material through graphite nanoplate-MWCNT-graphite nanoplate networking. , 2013, ACS applied materials & interfaces.

[45]  V. Choudhary,et al.  Multi walled carbon nanotubes induced viscoelastic response of polypropylene copolymer nanocomposites: Effect of filler loading on rheological percolation , 2016 .

[46]  C. Balasubramanian,et al.  Screening Electromagnetic Interference Effect using Nanocomposites , 2008 .

[47]  Ayesha Kausar,et al.  Review of Applications of Polymer/Carbon Nanotubes and Epoxy/CNT Composites , 2016 .

[48]  M. Moniruzzaman,et al.  Polymer Nanocomposites Containing Carbon Nanotubes , 2006 .

[49]  P. Lambin,et al.  Epoxy composites filled with high surface area-carbon fillers: Optimization of electromagnetic shielding, electrical, mechanical, and thermal properties , 2013 .

[50]  Q. Zheng,et al.  An analytical model of effective electrical conductivity of carbon nanotube composites , 2008 .

[51]  Liang Wu,et al.  Relations between the aspect ratio of carbon nanotubes and the formation of percolation networks in biodegradable polylactide/carbon nanotube composites , 2010 .

[52]  T. Das,et al.  Thermal-air ageing treatment on mechanical, electrical, and electromagnetic interference shielding properties of lightweight carbon nanotube based polymer nanocomposites , 2018 .

[53]  Polina Kuzhir,et al.  Role of finite-size effects in the microwave and subterahertz electromagnetic response of a multiwall carbon-nanotube-based composite: Theory and interpretation of experiments , 2013 .

[54]  M. Shokrieh,et al.  Effect of multi-walled carbon nanotube aspect ratio on mechanical and electrical properties of epoxy-based nanocomposites , 2011 .