Corrosion and degradation in MEA based post-combustion CO2 capture

Abstract Two of the main challenges in post-combustion CO2 capture with ethanolamine are solvent degradation and material corrosion. It has been shown that there is a correlation between degradation and corrosion. The present paper examines this correlation by studying the effect of 10 MEA degradation products on corrosion. Thermal degradation experiments were conducted under stripper conditions for 5 weeks. 30 wt% MEA solution with 1 wt% of the various degradation products was placed in 316 SS cylinders and stored in a thermostat chamber at 135 °C. ICP-MS was used for the metal concentration analyses for all the solutions, while ion chromatography was used for the quantitative determination of heat stable salts anions and MEA concentrations. The solutions were also analysed for degradation products in order to study the formation and thermal stability of these compounds. For corrosion monitoring, in addition to ICP-MS analyses, SEM–EDS was used for examining the cylinders’ surface morphology and elemental composition while XRD was used for corrosion product identification. In the present paper, the influence of the secondary degradation products on corrosion is studied. Results show that some specific degradation products, such as Bicine, HeGly and HEEDA, enhance corrosion while others do not seem to have a significant effect on corrosion of stainless steel.

[1]  P. C. Rooney,et al.  Effect of heat stable salts on MDEA solution corrosivity: Part 2 , 1997 .

[2]  Ruifeng Liu,et al.  Theoretical Study of Thermal Decomposition Mechanism of Oxalic Acid , 1997 .

[3]  Curt M. White,et al.  Degradation Pathways for Monoethanolamine in a CO2 Capture Facility , 2003 .

[4]  Paitoon Tontiwachwuthikul,et al.  Corrosion Behavior of Carbon Steel in the Monoethanolamine−H2O−CO2−O2−SO2 System: Products, Reaction Pathways, and Kinetics , 2009 .

[5]  Amornvadee Veawab,et al.  Electrochemical Investigation on the Effect of Heat-stable Salts on Corrosion in CO2 Capture Plants Using Aqueous Solution of MEA , 2006 .

[6]  A. Kohl,et al.  Chapter 2 – Alkanolamines for Hydrogen Sulfide and Carbon Dioxide Removal , 1997 .

[7]  Anthony John Griffiths,et al.  Thermal degradation of monoethanolamine and its effect on CO2 capture capacity , 2013 .

[8]  U. Desideri Advanced absorption processes and technology for carbon dioxide (CO2) capture in power plants , 2010 .

[9]  H. Svendsen,et al.  Understanding 2-Ethanolamine Degradation in Postcombustion CO2 Capture , 2012 .

[10]  Hallvard F. Svendsen,et al.  Oxidative degradation of 2-ethanolamine: The effect of oxygen concentration and temperature on product formation , 2013 .

[11]  Amornvadee Veawab,et al.  Corrosion Behavior of Carbon Steel in the CO2 Absorption Process Using Aqueous Amine Solutions , 1999 .

[12]  Gary T. Rochelle,et al.  Catalysts and inhibitors for oxidative degradation of monoethanolamine , 2009 .

[13]  Y. Zhuo,et al.  Study on corrosion in CO2 chemical absorption process using amine solution , 2011 .

[14]  Hallvard F. Svendsen,et al.  Comparison of MEA degradation in pilot-scale with lab-scale experiments , 2011 .

[15]  S. Nešić Carbon Dioxide Corrosion of Mild Steel , 2011 .

[16]  Hallvard F. Svendsen,et al.  Selection of new absorbents for carbon dioxide capture , 2005 .

[17]  Gary T. Rochelle,et al.  Products and process variables in oxidation of monoethanolamine for CO2 capture , 2013 .

[18]  R. Idem,et al.  Part 3: Corrosion and prevention in post-combustion CO2 capture systems , 2011 .

[19]  Klaus‐Joachim Jens,et al.  Oxidative Degradation of Aqueous Amine Solutions of MEA, AMP, MDEA, Pz: A Review , 2013 .

[20]  Srdjan Nesic,et al.  A mechanistic model for carbon dioxide corrosion of mild steel in the presence of protective iron carbonate films - Part 3: Film growth model , 2003 .

[21]  Karl Stéphenne,et al.  Start-up of World's First Commercial Post-combustion Coal Fired CCS Project: Contribution of Shell Cansolv to SaskPower Boundary Dam ICCS Project , 2014 .

[22]  T. R. Bacon,et al.  Understanding corrosion in alkanolamine gas treating plants: Part 1 , 1993 .

[23]  P. C. Rooney,et al.  Part 2. Effect of heat stable salts on MDEA solution corrosivity : Gas processing developments : A special report , 1997 .

[24]  S. Nešić,et al.  Time-dependent electrochemical behavior of carbon steel in MEA-based CO2 capture process , 2014 .

[25]  Chang-he Chen,et al.  Corrosion Behavior of Carbon Steel at Typical Positions of an Amine-Based CO2 Capture Pilot Plant , 2012 .

[26]  J. Kittel,et al.  Corrosion in CO2 Post-Combustion Capture with Alkanolamines – A Review , 2014 .

[27]  Simon James,et al.  Corrosion and materials selection issues in carbon capture plants , 2011 .

[28]  D. A. Hansen,et al.  Solving Corrosion Problems at the NEA Bellingham, Massachusetts Carbon Dioxide Recovery Plant , 1999 .

[29]  H. Knuutila,et al.  Effect of MEA's degradation products on corrosion at CO2 capture plants , 2014 .

[30]  Jason Daniel Davis,et al.  Thermal degradation of aqueous amines used for carbon dioxide capture , 2009 .

[31]  Hallvard F. Svendsen,et al.  Influence of experimental setup on amine degradation , 2014 .

[32]  T. Hemmingsen,et al.  Effect of FeCO3 Supersaturation and Carbide Exposure on the CO2 Corrosion Rate of Carbon Steel , 2013 .

[33]  H. Knuutila,et al.  Quantitative determination of amines used in post-combustion CO2 capture process by ion chromatography , 2015 .