Modeling of HCCI engine combustion for control analysis

Operation of homogeneous charge compression ignition (HCCI) engines are very sensitive to timing variations in the combustion of the air-fuel charge mixture and require precise control of the ignition instant to run properly. It is therefore essential to understand the characteristics of timing variations under various operating conditions in order to find suitable control strategies. This paper presents a first step towards the construction of an HCCI engine model aimed at studies on timing control strategies. The goal is to (qualitatively) reproduce the timing effects that may be observed on a real engine. The proposed model includes a lumped chemical kinetic model for hydrocarbon fuels to predict autoignition. Single-cycle simulations are compared with experimental results from a real engine to validate the model. Comparisons are also made with a model based on the knock-integral.

[1]  Rolf Johansson,et al.  Closed‐loop combustion control of homogeneous charge compression ignition (HCCI) engine dynamics , 2004 .

[2]  John E. Dec,et al.  Combined Effects of Fuel-Type and Engine Speed on Intake Temperature Requirements and Completeness of Bulk-Gas Reactions for HCCI Combustion , 2003 .

[3]  G.M. Shaver,et al.  Physics-based closed-loop control of phasing, peak pressure and work output in HCCI engines utilizing variable valve actuation , 2004, Proceedings of the 2004 American Control Conference.

[4]  John B. Heywood,et al.  Heat Release Analysis of Engine Pressure Data , 1984 .

[5]  Hans-Erik Ångström,et al.  Transient Control of HCCI Through Combined Intake and Exhaust Valve Actuation , 2003 .

[6]  Gregory M. Shaver,et al.  Modeling for control of HCCI engines , 2003, Proceedings of the 2003 American Control Conference, 2003..

[7]  Per Amnéus Homogeneous Ignition - Chemical Kinetic Studies for IC-Engine Applications , 2002 .

[8]  D. Spalding,et al.  INTRODUCTION TO COMBUSTION , 1979 .

[9]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[10]  G. Woschni A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .

[11]  S. Turns Introduction to Combustion , 1995, Aerothermodynamics and Jet Propulsion.

[12]  L. Kirsch,et al.  The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical model , 1977 .

[13]  Bengt Johansson,et al.  Closed-Loop Control of an HCCI Engine , 2001 .

[14]  Rolf Johansson,et al.  System Identification of Homogenous Charge Compression Ignition (HCCI) Engine Dynamics , 2004 .

[15]  Shigeyuki Tanaka,et al.  A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine , 2003 .

[16]  Joshua R. Smith,et al.  HCCI Engine Control by Thermal Management , 2000 .