Thickness Characterization Toolbox for Transparent Protective Coatings on Polymer Substrates

The thickness characterization of transparent protective coatings on functional, transparent materials is often problematic. In this paper, a toolbox to determine the thicknesses of a transparent coating on functional window films is presented. The toolbox consists of a combination of secondary ion mass spectrometry and profilometry and can be transferred to other transparent polymeric materials. A coating was deposited on designed model samples, which were characterized with cross-sectional views in transmission and in scanning/transmission electron microscopy and ellipsometry. The toolbox was then used to assess the thicknesses of the protective coatings on the pilot-scale window films. This coating was synthesized using straightforward sol-gel alkoxide chemistry. The kinetics of the condensation are studied in order to obtain a precursor that allows fast drying and complete condensation after simple heat treatment. The shelf life of this precursor solution was investigated in order to verify its accordance to industrial requirements. Deposition was performed successfully at low temperatures below 100 °C, which makes deposition on polymeric foils possible. By using roll-to-roll coating, the findings of this paper are easily transferrable to industrial scale. The coating was tested for scratch resistance and adhesion. Values for the emissivity (ε) of the films were recorded to justify the use of the films obtained as infrared reflective window films. In this work, it is shown that the toolbox measures similar thicknesses to those measured by electron microscopy and can be used to set a required thickness for protective coatings.

[1]  K. D. Buysser,et al.  Recent Advances in Low-Temperature Deposition Methods of Transparent, Photocatalytic TiO2 Coatings on Polymers , 2018 .

[2]  J. Hänisch,et al.  Optimizing nanocomposites through nanocrystal surface chemistry : superconducting YBa2Cu3O7 thin films via low-fluorine metal organic deposition and preformed metal oxide nanocrystals , 2017 .

[3]  D. Cuypers,et al.  Thermal processing of aqueous AZO inks towards functional TCO thin films , 2017 .

[4]  P. P. Lottici,et al.  OctTES/TEOS system for hybrid coatings: real time monitoring of the hydrolysis and condensation by Raman spectroscopy , 2016 .

[5]  M. Messori,et al.  Hydrophobic Scratch Resistant UV‐Cured Epoxy Coating , 2016 .

[6]  Jozefien Geltmeyer,et al.  The influence of tetraethoxysilane sol preparation on the electrospinning of silica nanofibers , 2016, Journal of Sol-Gel Science and Technology.

[7]  P. Vermeir,et al.  Influence of aqueous precursor chemistry on the growth process of epitaxial SrTiO3 buffer layers. , 2014, Inorganic chemistry.

[8]  J. Bokhoven,et al.  Synthesis of amorphous aluminosilicates by grafting: Tuning the building and final structure of the deposit by selecting the appropriate synthesis conditions , 2014 .

[9]  Jozefien Geltmeyer,et al.  Optimum sol viscosity for stable electrospinning of silica nanofibres , 2013, Journal of Sol-Gel Science and Technology.

[10]  K. D. Buysser,et al.  Feasibility study of the synthesis of YBiO3 thin films by aqueous chemical solution deposition as an alternative for CeO2 buffer layers in coated conductors , 2013 .

[11]  D. Vanpoucke,et al.  Aqueous CSD approach for the growth of novel, lattice-tuned LaxCe1−xOδ epitaxial layers , 2012 .

[12]  C. Detavernier,et al.  Ultra-low-k cyclic carbon-bridged PMO films with a high chemical resistance , 2012 .

[13]  K. Houthoofd,et al.  29Si NMR and UV−Raman Investigation of Initial Oligomerization Reaction Pathways in Acid-Catalyzed Silica Sol−Gel Chemistry , 2011 .

[14]  Siamak Moradian,et al.  Effect of addition of hydrophobic nano silica on viscoelastic properties and scratch resistance of an acrylic/melamine automotive clearcoat , 2010 .

[15]  Y. Hirai,et al.  Analysis of Charging Phenomena of Polymer Films on Silicon Substrates under Electron Beam Irradiation , 2008 .

[16]  Massimo Messori,et al.  Scratch resistance of nano-silica reinforced acrylic coatings , 2008 .

[17]  E. Ando,et al.  Moisture resistance of the low-emissivity coatings with a layer structure of Al-doped ZnO/Ag/Al-doped ZnO , 2001 .

[18]  Susumu Suzuki,et al.  Sputtered silver-based low-emissivity coatings with high moisture durability , 2000 .

[19]  E. Ando,et al.  Moisture degradation mechanism of silver-based low-emissivity coatings , 1999 .

[20]  E. Ando,et al.  Durability improvement of Ag-based low-emissivity coatings , 1994 .

[21]  L. Ilharco,et al.  The evolution of TEOS to silica gel and glass by vibrational spectroscopy , 1992 .

[22]  R. Ross.  Observations on humidity-induced degradation of Ag-based low-emissivity films , 1990 .

[23]  J. Boilot,et al.  Sol-gel condensation of rapidly hydrolyzed silicon alkoxides: A joint 29Si NMR and small-angle x-ray scattering study. , 1990, Physical review. A, Atomic, molecular, and optical physics.

[24]  S. Nadel.  Durability of Ag based low‐emissivity coatings , 1987 .

[25]  C. W. Turner,et al.  Studies of the hydrolysis and condensation of tetraethylorthosilicate by multinuclear (1h, 17o, 29si) nmr spectroscopy , 1987 .

[26]  Paul M. Zavracky,et al.  Transparent heat‐mirror films of TiO2/Ag/TiO2 for solar energy collection and radiation insulation , 1974 .