Experimental and Numerical Study

[1]  F. Yamazaki,et al.  CYCLIC SIMPLE SHEAR TESTS ON SATURATED SAND IN MULTI-DIRECTIONAL LOADING , 1980 .

[2]  P. Smith,et al.  Characterisation and modelling of the notched tensile fracture of woven quasi-isotropic GFRP laminates , 2001 .

[3]  Yiu-Wing Mai,et al.  Improving the delamination resistance of CFRP by stitching—a review , 1994 .

[4]  B. Hoomans.  Granular dynamics of gas-solid two-phase flows , 2000 .

[5]  Ignace Verpoest,et al.  Micro-CT characterization of variability in 3D textile architecture , 2005 .

[6]  Jonathan P. Stewart,et al.  Liquefaction-Induced Lateral Spreading at Izmit Bay during the Kocaeli (Izmit)-Turkey Earthquake , 2004 .

[7]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[8]  D. Gidaspow,et al.  Hydrodynamics of binary fluidization in a riser : CFD simulation using two granular temperatures , 2003 .

[9]  Ross W. Boulanger,et al.  Strength Loss and Localization at Silt Interlayers in Slopes of Liquefied Sand , 2004 .

[10]  Chang-Hsuan Chiu,et al.  Fatigue behavior of 3D multi-layer angle interlock woven composite plates , 2000 .

[11]  Yakup Sekmen,et al.  Artificial neural-network based modeling of variable valve-timing in a spark-ignition engine , 2005 .

[12]  A. W. Vreman.  An eddy-viscosity subgrid-scale model for turbulent shear flow: Algebraic theory and applications , 2004 .

[13]  Takaji Kokusho,et al.  Current state of research on flow failure considering void redistribution in liquefied deposits , 2003 .

[14]  J. Thomas,et al.  Liquefaction and Postliquefaction Behavior of Sand , 1995 .

[15]  Y. Tsuji,et al.  Cluster patterns in circulating fluidized beds predicted by numerical simulation (discrete particle model versus two-fluid model) , 1998 .

[16]  Gerald H. Ristow,et al.  Geometrical Analysis of Avalanches in a 2D Drum , 1995 .

[17]  J. Dodds,et al.  The porosity and contact points in multicomponent random sphere packings calculated by a simple statistical geometric model , 1980 .

[18]  R. Jackson,et al.  Gas‐particle flow in a vertical pipe with particle‐particle interactions , 1989 .

[19]  D. Gidaspow,et al.  Simulation and experiment of segregating/mixing of rice husk–sand mixture in a bubbling fluidized bed , 2005 .

[20]  Rosato,et al.  Why the Brazil nuts are on top: Size segregation of particulate matter by shaking. , 1987, Physical review letters.

[21]  Seref Soylu,et al.  Development of empirically based burning rate sub-models for a natural gas engine , 2004 .

[22]  H. Hiroyasu,et al.  Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions : Part 1 Combustion Modeling , 1983 .

[23]  Clément,et al.  Studies of columns of beads under external vibrations. , 1994, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[24]  C. R. Ferguson.  Internal Combustion Engines: Applied Thermosciences , 1986 .

[25]  F. Guild,et al.  Quantifying the effect of homogeneous and localized damage mechanisms on the damping properties of damaged GFRP and CFRP continuous and woven composite laminates—an FEA approach , 2005 .

[26]  A. Neri,et al.  Riser hydrodynamics: Simulation using kinetic theory , 2000 .

[27]  P. Brøndsted,et al.  Fatigue Dissipation and Failure in Unidirectional and Angle-Ply Glass Fibre/Carbon Fibre Hybrid Laminates , 2001 .

[28]  Russell D. Jamison,et al.  On the Interrelationship Between Fiber Fracture and Ply Cracking in Graphite/Epoxy Laminates , 1986 .

[29]  K. Ishihara.  Liquefaction and flow failure during earthquakes. , 1993 .

[30]  Tron Solberg,et al.  Experimental and computational study of multiphase gas/particle flow in a CFB riser , 1999 .

[31]  Ross W. Boulanger,et al.  Shear Localization Due to Liquefaction-Induced Void Redistribution in a Layered Infinite Slope , 2006 .

[32]  Kohji Tokimatsu,et al.  New charts for predicting large residual post-liquefaction ground deformation , 1998 .

[33]  Yang Zhenzhong,et al.  An investigation of optimum control of ignition timing and injection system in an in-cylinder injection type hydrogen fueled engine , 2002 .

[34]  A. E. Bogdanovich,et al.  Multi-scale modeling, stress and failure analyses of 3-D woven composites , 2006 .

[35]  K. Sassa,et al.  Seismic triggering of catastrophic failures on shear surfaces in saturated cohesionless soils , 2005 .

[36]  Brian N. Cox,et al.  Compression-compression fatigue of 3D woven composites , 1995 .