Fabrication and Characterization of a Flexible Fluxgate Sensor with Pad-Printed Solenoid Coils†

This paper presents the fabrication and characterization of a flexible, flat, miniaturized fluxgate sensor with a thin amorphous rectangular magnetic core fabricated by the pad/printing technique. Both the design and the various printing steps of the sensor are presented. The fluxgate sensor comprises of solenoid coils, and to the best of our knowledge, is the first to be printed with a conventional micro-printing technique. The magnetic core is a non-printed component, placed between the printed layers. The sensor’s linear measuring range is ±40 µT with 2% full-scale linearity error, at 100 kHz excitation frequency. The highest measured sensitivity reaches 14,620 V/T at 200 kHz, while the noise of the sensor was found to be 10 nT/Hz at 1 Hz.

[1]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[2]  Guangyou Fang,et al.  A Quantitative Model for the Sensitivity of Untuned Voltage Output Fluxgate Sensors , 2016, IEEE Sensors Journal.

[3]  Radivoje Popovic,et al.  CMOS planar 2D micro-fluxgate sensor , 2000 .

[4]  Richard G. Compton,et al.  Evaluation of a novel pad printing technique for the fabrication of disposable electrode assemblies , 2005 .

[5]  David Harrison,et al.  Capacitive-type humidity sensors fabricated using the offset lithographic printing process , 2002 .

[6]  F. Krebs.  Pad printing as a film forming technique for polymer solar cells , 2009 .

[7]  Daniil Karnaushenko,et al.  Stretchable magnetoelectronics. , 2011, Nano letters.

[8]  Andriy Marusenkov,et al.  Flux-Gate Magnetometers Design Peculiarities , 2012, Surveys in Geophysics.

[9]  T. Itoh,et al.  Development of thin film based flexible current clamp sensor using screen-printed coil , 2016, 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP).

[10]  Pavel Ripka,et al.  PCB racetrack fluxgate sensor with improved temperature stability , 2006 .

[11]  Hur Shin,et al.  EL device pad-printed on a curved surface , 2010 .

[12]  Xue-cheng Sun,et al.  Improved performance of the micro planar double-axis fluxgate sensors with different magnetic core materials and structures , 2016 .

[13]  Bodong Li,et al.  Flexible magnetoimpedance sensor , 2015 .

[14]  Yong Zhu,et al.  Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications , 2019, Advanced Materials Technologies.

[15]  Chee Kai Chua,et al.  A review of printed passive electronic components through fully additive manufacturing methods , 2016 .

[16]  Pavel Ripka,et al.  Advances in fluxgate sensors , 2003 .

[17]  Shoji Kawahito,et al.  High-resolution micro-fluxgate sensing elements using closely coupled coil structures , 1996 .

[18]  Chong H. Ahn,et al.  A micro-fluxgate magnetic sensor using micromachined planar solenoid coils 1 Paper presented as part , 1999 .

[19]  M. Ferrari,et al.  Distance-Independent Contactless Interrogation of Quartz Resonator Sensor with Printed-on-Crystal Coil , 2019 .

[20]  Radivoje Popovic,et al.  A new compact 2D planar fluxgate sensor with amorphous metal core , 2000 .

[21]  Philippe Passeraub,et al.  A Flexible Pad-Printed Fluxgate Sensor , 2017 .

[22]  Marcelo Mulato,et al.  Miniature Planar Fluxgate Magnetic Sensors Using a Single Layer of Coils , 2015, IEEE Sensors Journal.

[23]  E. Belloy,et al.  Printed circuit board integrated fluxgate sensor , 2000 .

[24]  A. Tipek,et al.  Excitation and temperature stability of PCB fluxgate sensor , 2005, IEEE Sensors Journal.

[25]  S. Tumański.  Handbook of Magnetic Measurements , 2011 .

[26]  Chih-Cheng Lu,et al.  High-Sensitivity Low-Noise Miniature Fluxgate Magnetometers Using a Flip Chip Conceptual Design , 2014, Sensors.

[27]  Xiaoliang Zhang,et al.  Wireless Resonant Circuits Printed Using Aerosol Jet Deposition for MRI Catheter Tracking , 2020, IEEE Transactions on Biomedical Engineering.

[28]  Shih-Jui Chen,et al.  Multilayered vectorial fluxgate magnetometer based on PCB technology and dispensing process , 2019, Measurement Science and Technology.

[29]  Leandro Lorenzelli,et al.  Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review , 2015, IEEE Sensors Journal.