Evaluation of thick silicon dioxides grown on trench MOS gate structures

We have investigated trench MOS gate power devices that utilize trench gate oxide over 20 nm in thickness. Our results show, for the first time, that the leakage characteristics of trench MOS capacitors have a particular local maximum in the leakage current. We call leakage characteristics of a trench MOS capacitor "camel's hump" leakage current. Moreover, the dielectric breakdown of the silicon dioxide (SiO/sub 2/) film in the trench occurs after a specific point. Experiments conducted affirm that the keen convex corner at the trench top edge is the main factor for determining the electrical property of a thick trench MOS gate oxide, and this fact is supported by numerical device simulation. The leakage current can be suppressed by utilizing chemical dry etching (CDE), followed by sacrificial high-temperature oxidation prior to gate oxidation. These factors are considered vital for the development of trench MOS gate power devices.

[1]  H. Tango,et al.  A deep-trenched capacitor technology for 4 mega bit dynamic RAM , 1985, 1985 International Electron Devices Meeting.

[2]  R. B. Marcus,et al.  The Oxidation of Shaped Silicon Surfaces , 1982 .

[3]  Florin Udrea,et al.  A unified analytical model for the carrier dynamics in trench insulated gate bipolar transistors (TIGBT) , 1995, Proceedings of International Symposium on Power Semiconductor Devices and IC's: ISPSD '95.

[4]  Ichiro Omura,et al.  A 4500 V injection enhanced insulated gate bipolar transistor (IEGT) operating in a mode similar to a thyristor , 1993, Proceedings of IEEE International Electron Devices Meeting.

[5]  K. Yamabe,et al.  Nonplanar oxidation and reduction of oxide leakage currents at silicon corners by rounding-off oxidation , 1987, IEEE Transactions on Electron Devices.

[6]  H.-R. Chang,et al.  500-V n-channel insulated-gate bipolar transistor with a trench gate structure , 1989 .

[7]  K. Yoshikawa,et al.  Two Dimensional Effect on Suppression of Thermal Oxidation Rate , 1984 .

[8]  T. Kure,et al.  Scaling consideration and dielectric breakdown improvement of corrugated capacitor cell (CCC) for future DRAM , 1984, 1984 International Electron Devices Meeting.

[9]  Eugene A. Irene,et al.  A Viscous Flow Model to Explain the Appearance of High Density Thermal SiO2 at Low Oxidation Temperatures , 1982 .

[10]  I. Takata,et al.  600 V trench IGBT in comparison with planar IGBT-an evaluation of the limit of IGBT performance , 1994, Proceedings of the 6th International Symposium on Power Semiconductor Devices and Ics.