Design and operation of a compact microchannel 5 kWel,net methanol steam reformer with novel Pt/In2O3 catalyst for fuel cell applications

Abstract A methanol reformer was designed, built and tested, which allows hydrogen production for high temperature PEM fuel cells for mobile applications applying micro-structured plate heat-exchanger technology and a novel, highly active catalyst formulation for oxidative steam reforming of methanol at temperatures exceeding 300 °C. It is one of the first micro-structured methanol reformers with integrated anode off-gas combustion, which works in the kW scale. The reformer was operated under conditions of start-up, steady state and under dynamic conditions, in connection with a 1 kW high temperature PEM fuel cell and finally integrated into a fuel processor, which contained an external evaporator and a heat-exchanger for super-heating the reformer feed. The thermal power of the hydrogen produced by the reformer amounted to 20 kWthermal, which corresponds to 6.5 kWel of a fuel cell at 40% efficiency and 80% hydrogen utilization.

[1]  B. Höhlein,et al.  Investigation of a methanol reformer concept considering the particular impact of dynamics and long-term stability for use in a fuel-cell-powered passenger car , 2000 .

[2]  Shudong Wang,et al.  Methanol steam reforming in a compact plate-fin reformer for fuel-cell systems , 2005 .

[3]  Zhengdong Wang,et al.  Development of a microchannel reactor concerning steam reforming of methanol , 2006 .

[4]  Chang-Soo Kim,et al.  Hydrogen production with integrated microchannel fuel processor for portable fuel cell systems , 2005 .

[5]  Xiaohong Li,et al.  Methanol steam reforming over Pd/ZnO: Catalyst preparation and pretreatment studies , 2003 .

[6]  Gunther Kolb,et al.  A complete miniaturized microstructured methanol fuel processor/fuel cell system for low power applications , 2008 .

[7]  Haruo Kobayashi,et al.  ON THE DIFFERENCE IN REACTION PATHWAYS OF STEAM REFORMING OF METHANOL OVER COPPER-SILICA AND PLATINUM-SILICA CATALYSTS , 1985 .

[8]  E. G. Baker,et al.  Miniature Fuel Processors for Portable Fuel Cell Power Supplies , 2002 .

[9]  Mark S. Wainwright,et al.  KINETIC MECHANISM FOR THE REACTION BETWEEN METHANOL AND WATER OVER A CU-ZNO-AL2O3 CATALYST , 1993 .

[10]  V. Formanski,et al.  Compact hydrogen production systems for solid polymer fuel cells , 1998 .

[11]  Vito Specchia,et al.  Diesel fuel processor for PEM fuel cells: Two possible alternatives (ATR versus SR) , 2006 .

[12]  J. Gil,et al.  The fabrication and performance of a poly(dimethylsiloxane) (PDMS)-based microreformer for application to electronics , 2008 .

[13]  Michael P. Harold,et al.  Autothermal reforming of methanol: Experiments and modeling , 2007 .

[14]  Chang-Soo Kim,et al.  Development of microchannel methanol steam reformer , 2004 .

[15]  Detlef zur Megede.  Fuel processors for fuel cell vehicles , 2002 .

[16]  H. Moon,et al.  An annulus-type micro reforming system integrated with a two-staged micro-combustor , 2010 .

[17]  Rui Chen,et al.  A carbon monoxide PROX reactor for PEM fuel cell automotive application , 2001 .

[18]  Rui Chen,et al.  Evaluation and modelling of a CO selective oxidation reactor for solid polymer fuel cell automotive applications , 2000 .

[19]  Alice Dohnalkova,et al.  Steam Reforming of Methanol Over Highly Active Pd/ZnO Catalyst. , 2002 .

[20]  B. Yi,et al.  A 75-kW methanol reforming fuel cell system , 2006 .

[21]  Seok-Min Lee,et al.  Metal membrane-type 25-kW methanol fuel processor for fuel-cell hybrid vehicle , 2002 .

[22]  Gunther Kolb,et al.  Microstructured Plate Heat Exchanger Reactors for High Temperature Applications , 2013 .

[23]  V. Hessel,et al.  A Methanol Steam Micro-Reformer for Low Power Fuel Cell Applications , 2005 .

[24]  Wan Ramli Wan Daud,et al.  Hydrogen production from steam–methanol reforming: thermodynamic analysis , 2000 .

[25]  Ferdinand Panik,et al.  Fuel cells for vehicle applications in cars - bringing the future closer , 1998 .

[26]  G. Kolb,et al.  Development of a Micro‐Structured Methanol Fuel Processor Coupled to a High‐Temperature Proton Exchange Membrane Fuel Cell , 2009 .

[27]  M. Schuessler,et al.  Monolithic integrated fuel processor for the conversion of liquid methanol , 2003 .

[28]  Masatoshi Nomura,et al.  Development of multi-layered microreactor with methanol reformer for small PEMFC , 2005 .

[29]  Taegyu Kim,et al.  Micro methanol reformer combined with a catalytic combustor for a PEM fuel cell , 2009 .

[30]  Oh Joong Kwon,et al.  Performance of a miniaturized silicon reformer-PrOx-fuel cell system , 2007 .

[31]  Y. Shul,et al.  Process intensification by micro-channel reactor for steam reforming of methanol , 2008 .

[32]  Yu-Ming Lin,et al.  An integrated purification and production of hydrogen with a palladium membrane-catalytic reactor , 1998 .

[33]  M. Akbari,et al.  Methanol steam reforming in a planar wash coated microreactor integrated with a micro-combustor , 2011 .

[34]  Gunther Kolb,et al.  Fuel Processing: For Fuel Cells , 2008 .

[35]  Gerhart Eigenberger,et al.  A new reactor concept for endothermic high-temperature reactions , 1999 .

[36]  Sung Han Kim,et al.  MEMS-based micro-fuel processor for application in a cell phone , 2006 .

[37]  Ing.Steffen Wieland,et al.  Membrane reactors for hydrogen production , 2002 .

[38]  Shudong Wang,et al.  Modeling of a compact plate-fin reformer for methanol steam reforming in fuel cell systems , 2005 .

[39]  Asterios Gavriilidis,et al.  Catalytic combustion assisted methane steam reforming in a catalytic plate reactor , 2003 .

[40]  G. Saracco,et al.  Combining Catalytic Combustion and Steam Reforming in a Novel Multifunctional Reactor for On-Board Hydrogen Production from Middle Distillates , 2005 .

[41]  Lars J. Pettersson,et al.  Development of a methanol fuelled reformer for fuel cell applications , 2003 .

[42]  Evan O. Jones,et al.  Microfuel processor for use in a miniature power supply , 2002 .

[43]  Evan O. Jones,et al.  Power generation using a mesoscale fuel cell integrated with a microscale fuel processor , 2004 .

[44]  R. Zapf,et al.  Methanol steam reforming over bimetallic Pd–In/Al2O3 catalysts in a microstructured reactor , 2010 .

[45]  D. Gregušová,et al.  Conformal AZ5214-E resist deposition on patterned (1 0 0) InP substrates , 2006 .

[46]  Chunxi Zhang,et al.  Study on a compact methanol reformer for a miniature fuel cell , 2011 .

[47]  M. Esashi,et al.  A micro-fuel processor with trench-refilled thick silicon dioxide for thermal isolation fabricated by water-immersion contact photolithography , 2005 .

[48]  Andrew Dicks,et al.  Hydrogen generation from natural gas for the fuel cell systems of tomorrow , 1996 .

[49]  Shigeyuki Kawatsu,et al.  Advanced PEFC development for fuel cell powered vehicles , 1998 .

[50]  E. U. Ubong,et al.  Three-Dimensional Modeling and Experimental Study of a High Temperature PBI-Based PEM Fuel Cell , 2009 .

[51]  R. Zapf,et al.  Development of Microstructured Catalytic Wall Reactors for Hydrogen Production by Methanol Steam Reforming over Novel Pt/in2o3/al2o3 Catalysts , 2011 .

[52]  M. Esashi,et al.  A micro fuel reformer integrated with a combustor and a microchannel evaporator , 2006 .

[53]  Sejin Kwon,et al.  A MEMS methanol reformer heated by decomposition of hydrogen peroxide. , 2007, Lab on a chip.

[54]  Martin O'Connell,et al.  Towards mass production of microstructured fuel processors for application in future distributed energy generation systems: A review of recent progress at IMM , 2012 .

[55]  Mayuresh V. Kothare,et al.  A radial microfluidic fuel processor , 2005 .

[56]  Christopher D. Dudfield,et al.  A compact CO selective oxidation reactor for solid polymer fuel cell powered vehicle application , 2000 .

[57]  M. Kothare,et al.  A microreactor for hydrogen production in micro fuel cell applications , 2004, Journal of Microelectromechanical Systems.

[58]  Evan O. Jones,et al.  Design of micro‐scale fuel processors assisted by numerical modeling , 2005 .

[59]  Søren Knudsen Kær,et al.  Part one: A novel model of HTPEM-based micro-combined heat and power fuel cell system , 2008 .

[60]  P. Pfeifer,et al.  Electrically Heated Microreactors for Methanol Steam Reforming , 2003 .