Multi-ejector R744 booster refrigerating plant and air conditioning system integration – A theoretical evaluation of energy benefits for supermarket applications

Abstract The multi-ejector rack is the most promising technology to push the so-called “CO 2 equator” further south and improve the global energy efficiency of R744 supermarket refrigeration systems. This paper theoretically compares the energy consumption of a CO 2 refrigerating plant equipped with a multi-ejector unit with that of a R404A direct expansion system (DXS), of a conventional CO 2 booster configuration and of two CO 2 solutions using parallel compression. The energy benefits related to the adoption of low temperature (LT) overfed display cabinets were also assessed. Furthermore, various scenarios involving different sizes of the supermarket, integration and capacity of the air conditioning (AC) system and efficiency of the parallel compressors were investigated. The evaluations were carried out by considering different locations in Southern Europe. The results showed that, as a function of the selected boundary conditions, energy savings ranging from 15.6% to 27.3% could be accomplished with the multi-ejector concept over DXS.

[1]  Savvas A. Tassou,et al.  Thermodynamic analysis of transcritical CO2 booster refrigeration systems in supermarket , 2011 .

[2]  Masafumi Nakagawa,et al.  Experimental investigation on the effect of mixing length on the performance of two-phase ejector for CO2 refrigeration cycle with and without heat exchanger , 2011 .

[3]  Rodrigo Llopis,et al.  Experimental evaluation of a CO2 transcritical refrigeration plant with dedicated mechanical subcooling , 2016 .

[4]  A. Hafner,et al.  R744 refrigeration technologies for supermarkets in warm climates. , 2015 .

[5]  Sven Försterling,et al.  Multi-ejector concept for R-744 supermarket refrigeration , 2014 .

[6]  Paride Gullo,et al.  Modelling commercial refrigeration systems coupled with water storage to improve energy efficiency and perform heat recovery , 2016 .

[7]  H O Matthiesen,et al.  Evolution of CO2 systems design based on practical experiences from supermarket installations in Northern Europe. , 2010 .

[8]  Antonio Rossetti,et al.  Experience with ejector work recovery and auxiliary compressors in CO2 refrigeration systems. Technological aspects and application perspectives. , 2015 .

[9]  Armin Hafner,et al.  Performance comparison of fixed-and controllable-geometry ejectors in a CO2 refrigeration system. , 2016 .

[10]  Petter Nekså,et al.  Commercial refrigeration system using CO2 as the refrigerant , 2004 .

[11]  Marco Corradi,et al.  Energy performance of supermarket refrigeration and air conditioning integrated systems , 2010 .

[12]  Paride Gullo,et al.  Energy and environmental comparison of commercial R744 refrigeration systems operating in warm climates. , 2016 .

[13]  A Hafner,et al.  R744 refrigeration system configurations for supermarkets in warm climates. , 2014 .

[14]  Rodrigo Llopis,et al.  Energy improvements of CO2 transcritical refrigeration cycles using dedicated mechanical subcooling , 2015 .

[15]  K. Banasiak,et al.  R744 ejector supported parallel vapour compression system. , 2014 .

[16]  Sergio Marinetti,et al.  Experimental analysis of a new method for overfeeding multiple evaporators in refrigeration systems , 2014 .

[17]  Marco Corradi,et al.  Energy performance of supermarket refrigeration and air conditioning integrated systems working with natural refrigerants , 2012 .

[18]  A Hafner,et al.  Full scale supermarket laboratory R744 ejector supported & AC integrated parallel compression unit. , 2016 .

[19]  Samer Sawalha,et al.  Theoretical evaluation of trans-critical CO2 systems in supermarket refrigeration. Part II: System modifications and comparisons of different solutions , 2008 .

[20]  Sergio Marinetti,et al.  RECENT INSTALLATIONS OF CO2 SUPERMARKET REFRIGERATION SYSTEM FOR WARM CLIMATES: DATA FROM THE FIELD , 2014 .

[21]  Ian H. Bell.  Performance increase of carbon dioxide refrigeration cycle with the addition of parallel compression economization , 2004 .

[22]  Brian A. Fricke,et al.  Comparative analysis of various CO2 configurations in supermarket refrigeration systems , 2014 .

[23]  P. Gullo,et al.  Overfed evaporators and parallel compression in commercial R744 booster refrigeration systems - An assessment of energy benefits. , 2016 .

[24]  Mazyar Karampour,et al.  Theoretical analysis of CO2 trans-critical system with parallel compression for heat recovery and air conditioning in supermarkets , 2015 .

[25]  Brian Elmegaard,et al.  Energy and environmental performance assessment of R744 booster supermarket refrigeration systems operating in warm climates , 2016 .

[26]  P. Gullo,et al.  Energetic, Exergetic and Exergoeconomic Analysis of CO2 Refrigeration Systems Operating in Hot Climates , 2015 .

[27]  Ming Zhang.  Energy Analysis of Various Supermarket Refrigeration Systems , 2006 .

[28]  Paride Gullo,et al.  Supermarket refrigeration and air conditioning systems integration via a water storage , 2016 .

[29]  Armin Hafner,et al.  Development and performance mapping of a multi-ejector expansion work recovery pack for R744 vapour compression units. , 2015 .

[30]  Brian Elmegaard,et al.  Advanced exergy analysis of a R744 booster refrigeration system with parallel compression , 2016 .

[31]  Giovanni Ferrara,et al.  Experimental analysis of R744 parallel compression cycle , 2014 .

[32]  Armin Hafner,et al.  Application range of the HEM approach for CO2 expansion inside two-phase ejectors for supermarket refrigeration systems , 2015 .

[33]  Predrag Stojan Hrnjak,et al.  Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation , 2008 .

[34]  Armin Hafner,et al.  Experimental analysis of the R744 vapour compression rack equipped with the multi-ejector expansion work recovery module , 2016 .