Analysis of the wear resistance of a hard anti-friction coating, applied to a plain bearing, under the conditions of boundary friction

[1]  Andrey V. Gorin,et al.  Technological support for the durability of the balancing suspension of the car , 2020, IOP Conference Series: Materials Science and Engineering.

[2]  Xinchun Chen,et al.  Enhancement of friction performance of fluorinated graphene and molybdenum disulfide coating by microdimple arrays , 2020 .

[3]  V. Vrublevskaya,et al.  Antifrictional Characteristics of Sliding Bearings from Modified Pressed Wood , 2020, Journal of Friction and Wear.

[4]  C. R. Kwang-Hua.  Temperature-dependent negative friction coefficients in superlubric molybdenum disulfide thin films , 2020 .

[5]  S. Ghosh,et al.  Carbon nanomaterials as friction modifiers in automotive engines: Recent progress and perspectives , 2020 .

[6]  Tao Qing,et al.  The effect of lubricant temperature on dynamic behavior in angular contact ball bearings , 2020 .

[7]  H. Metselaar,et al.  An overview of fluoride-based solid lubricants in sliding contacts , 2020 .

[8]  Xiaoliang Shi,et al.  Friction and wear behaviors of TC4 alloy with surface microporous channels filled by Sn-Ag-Cu and Al2O3 nanoparticles , 2020 .

[9]  V. Arkhipov,et al.  Antifriction wear-resistant coatings process development for sliding bearing friction surfaces of submersible pumps , 2020, IOP Conference Series: Materials Science and Engineering.

[10]  Guotao Zhang,et al.  Tribological Properties of FeS-Cu Copper-Based Self-Lubricating Bearing Materials Prepared by Mechanical Alloying , 2020, Tribology Transactions.

[11]  A. Marusin,et al.  Development of a mathematical model of fuel equipment and the rationale for diagnosing diesel engines by moving the injector needle , 2020, IOP Conference Series: Earth and Environmental Science.

[12]  V. Alisin,et al.  Improvement of antifriction properties of sliding bearings with ceramic sleeves made of zirconium dioxide , 2020, IOP Conference Series: Earth and Environmental Science.

[13]  D. L. Zagorskiy,et al.  Studies on Structural Changes in the Surface Layers of Aluminum Alloys Based on the Al–Si–Cu System under Frictional Deformation , 2020, Russian Journal of Non-Ferrous Metals.

[14]  R. Mikheev,et al.  The influence of the protective environment during surfacing of heterogeneous antifriction coatings on their performance properties , 2019, SECOND INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS: ICMSS-2019.

[15]  B. Kandasubramanian,et al.  Rudiment of ‘galling: Tribological phenomenon’ for engineering components in aggregate with the advancement in functioning of the anti-galling coatings , 2019 .

[16]  Xinchun Chen,et al.  Enhancement of friction performance enabled by a synergetic effect between graphene oxide and molybdenum disulfide , 2019 .

[17]  V. E. Bakhareva,et al.  Heat-Resistant Antifriction Carbon Plastics for Sliding Bearings of Pumps of Ship Power Stations, Thermal and Nuclear Power Plants , 2019, Inorganic Materials: Applied Research.

[18]  Ekaterina Kuznetsova,et al.  Relationship of Secondary Structures and Wear Resistance of Antifriction Aluminum Alloys for Journal Bearings from the Point of View of Self-Organization During Friction , 2019, Entropy.

[19]  Shengyu Zhu,et al.  High temperature solid-lubricating materials: A review , 2019, Tribology International.

[20]  N. Sokolov,et al.  Methods and technology of ensuring stability of landslide slope using soil anchors , 2019, Geotechnics Fundamentals and Applications in Construction: New Materials, Structures, Technologies and Calculations.

[21]  I. Ali,et al.  Advances in carbon nanomaterials as lubricants modifiers , 2019, Journal of Molecular Liquids.

[22]  Minhao Zhu,et al.  Comparing space adaptability of diamond-like carbon and molybdenum disulfide films toward synergistic lubrication , 2018, Carbon.

[23]  S. A. Evtyukov,et al.  Improved Technology of Reinforcement Works and Technical Substantiation of Reinforcement Bar Oscillation Cutting , 2014 .

[24]  James F. Walton,et al.  Low-friction wear-resistant coatings for high-temperature foil bearings , 2005 .

[25]  T. P. Yukhno,et al.  Low temperature investigations on frictional behaviour and wear resistance of solid lubricant coatings , 2001 .

[26]  Igor Chernyaev,et al.  Methods for continuous monitoring of compliance of vehicles’ technical condition with safety requirements during operation , 2020 .

[27]  Aleksandr Marusin,et al.  Improving safety of using ambulance vehicles in large cities , 2020 .

[28]  A. Kapustin,et al.  Study of braking energy recovery impact on cost-efficiency and environmental safety of vehicle , 2020 .

[29]  V. Shepelev,et al.  Reduction of environmental impact from road transport using analysis and simulation methods , 2020 .

[30]  Mukhtar Kerimov,et al.  Model of multi-level system managing automated traffic enforcement facilities recording traffic violations , 2020 .

[31]  I. Malygin,et al.  Areas of focus in ensuring the environmental safety of motor transport , 2020 .

[32]  Mukhtar Kerimov,et al.  Methodological aspects of building mathematical model to evaluate efficiency of automated vehicle traffic control systems , 2020 .

[33]  Yuliia I. Lobanova,et al.  Role and methods of accident ability diagnosis in ensuring traffic safety , 2020 .

[34]  Igor Ivanov,et al.  Digital platform and ecosystem for providing regional transport mobility , 2020 .

[35]  Ravil Safiullin,et al.  Method to evaluate performance of measurement equipment in automated vehicle traffic control systems , 2020 .

[36]  Aleksandr Marusin,et al.  CDF simulation-based research of influence of mechanical defects in nozzles on environmental parameters of automotive diesel engines , 2020 .

[37]  Aleksandr Belyaev,et al.  Mathematical model for selecting the best technology for restoring road construction machines , 2020, E3S Web of Conferences.

[38]  A. Levin,et al.  Damage, brittle fracture resistance and working capacity of a KAMAZ vehicle leaf spring when operating in the North , 2019, Procedia Structural Integrity.

[39]  P. Podrabinnik,et al.  Secondary Structures as Self-Organization Processes and Finishing Treatment of Friction Surfaces of Slide Bearings and Shafts , 2019, Materials Today: Proceedings.

[40]  A. Levin,et al.  New approach to assessment of influence of climatic temperatures on working capacity of KAMAZ trucks in the North , 2019, Procedia Structural Integrity.

[41]  A. Petrov,et al.  Influence of regional features of psycho- emotional state of the Russian society on road accidents severity , 2018 .

[42]  Valery Lukinskiy,et al.  Concept of Quantitative Assessment of Knowledge Uncertainty in Accident Reconstruction Tasks , 2017 .

[43]  Sergej Repin,et al.  Theoretical Study on the Stressed State of the Disc-Shaped Cohesive Bulk Material , 2013 .