Influence of thigh muscles on the axial strains in a proximal femur during early stance in gait.

This work is focused on the in vitro simulation of the loads occurring in the femur during early stance in gait, for hip prosthesis stress shielding test purposes. Ten thigh muscles (the three gluteal muscles, the three vasti, rectus femoris, adductor longus and magnus, biceps femoris), simulated by nylon straps, were tested in order to establish their influence on the strains in the proximal femur. Axial and hoop strains were recorded from 16 strain gauges for the effect of each muscle and compared to the strains recorded as a result of the hip joint reaction force only (i.e. without muscle simulation). It appears that the three glutei are the principal muscles in determining the vertical strains, however the rectus femoris, biceps femoris and the adductors were also seen to significantly affect the strain pattern. The inadequacy of increasing the adduction angle and applying the resultant force at the hip joint to simulate the abductors was also confirmed.

[1]  G. Bergmann,et al.  Hip joint loading during walking and running, measured in two patients. , 1993, Journal of biomechanics.

[2]  F. Zajac,et al.  A musculoskeletal model of the human lower extremity: the effect of muscle, tendon, and moment arm on the moment-angle relationship of musculotendon actuators at the hip, knee, and ankle. , 1990, Journal of biomechanics.

[3]  H. Grootenboer,et al.  Adaptive bone-remodeling theory applied to prosthetic-design analysis. , 1987, Journal of biomechanics.

[4]  W H Harris,et al.  Micromotion of cemented and uncemented femoral components. , 1991, The Journal of bone and joint surgery. British volume.

[5]  J B Finlay,et al.  In vitro analysis of proximal femoral strains using PCA femoral implants and a hip-abductor muscle simulator. , 1989, The Journal of arthroplasty.

[6]  H Weinans,et al.  Trends of mechanical consequences and modeling of a fibrous membrane around femoral hip prostheses. , 1990, Journal of biomechanics.

[7]  W. Hayes,et al.  Role of loads and prosthesis material properties on the mechanics of the proximal femur after total hip arthroplasty , 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[8]  D R Pedersen,et al.  A measurement of proximal femur strain with total hip arthroplasty. , 1980, Journal of Biomechanical Engineering.

[9]  Paul Jp,et al.  Forces transmitted at the hip and knee joint of normal and disabled persons during a range of activities. , 1975 .

[10]  R. Huiskes,et al.  The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials. , 1992, Clinical orthopaedics and related research.

[11]  A Comparison of Various Loading Configurations of the Proximal Femur for the Evaluation of Reconstructive Surgical Procedures , 1992, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[12]  J. G. Andrews,et al.  A three-dimensional biomechanical model of hip musculature. , 1981, Journal of biomechanics.

[13]  S R Simon,et al.  An evaluation of the approaches of optimization models in the prediction of muscle forces during human gait. , 1981, Journal of biomechanics.

[14]  Ulrich Glitsch Comparison of different optimization approaches for the evaluation of internal loads of the lower limb , 1994 .

[15]  A Rohlmann,et al.  Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis. , 1983, Journal of biomechanics.

[16]  A. U. Daniels,et al.  Initial effect of collarless stem stiffness on femoral bone strain. , 1989, The Journal of arthroplasty.

[17]  A Rohlmann,et al.  Finite-element-analysis and experimental investigation of stresses in a femur. , 1982, Journal of biomedical engineering.

[18]  P G Niederer,et al.  Comparison of the stability of press‐fit hip prosthesis femoral stems using a synthetic model femur , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[19]  J. Szivek,et al.  Comparison of the deformation response of synthetic and cadaveric femora during simulated one-legged stance. , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[20]  R. Crowninshield,et al.  An analysis of femoral component stem design in total hip arthroplasty. , 1980, The Journal of bone and joint surgery. American volume.

[21]  R. Bourne,et al.  An evaluation of three loading configurations for the in vitro testing of femoral strains in total hip arthroplasty , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[22]  D. Davy,et al.  Telemeterized in vivo hip joint force data: A report on two patients after total hip surgery , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[23]  R. Huiskes The various stress patterns of press-fit, ingrown, and cemented femoral stems. , 1990, Clinical orthopaedics and related research.

[24]  H Weinans,et al.  Adaptive bone remodeling and biomechanical design considerations for noncemented total hip arthroplasty. , 1989, Orthopedics.

[25]  G. Kotzar,et al.  Femoral component loosening in hip arthroplasty. Cadaver study of subsidence and hoop strain. , 1987, Acta orthopaedica Scandinavica.

[26]  A Rohlmann,et al.  Effects of stem design and material properties on stresses in hip endoprostheses. , 1987, Journal of biomedical engineering.

[27]  N Rushton,et al.  Proximal femoral surface strain gauge analysis of a new epiphyseal prosthesis. , 1989, Journal of biomedical engineering.

[28]  W. Maloney,et al.  Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling. , 1989, Clinical orthopaedics and related research.

[29]  J. Gillquist,et al.  Calcar unloading after hip replacement. A cadaver study of femoral stem designs. , 1987, Acta orthopaedica Scandinavica.

[30]  R. Crowninshield,et al.  Reconstruction of the hip. A mathematical approach to determine optimum geometric relationships. , 1979, The Journal of bone and joint surgery. American volume.

[31]  J. G. Andrews,et al.  A biomechanical investigation of the human hip. , 1978, Journal of biomechanics.

[32]  P S Walker,et al.  Effect of press-fit femoral stems on strains in the femur. A photoelastic coating study. , 1990, The Journal of arthroplasty.

[33]  M. Panjabi,et al.  Effect of femoral stem length on stress raisers associated with revision hip arthroplasty , 1985, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[34]  D T Davy,et al.  Telemetric force measurements across the hip after total arthroplasty. , 1988, The Journal of bone and joint surgery. American volume.

[35]  Friedrich Pauwels,et al.  Biomechanics of the Normal and Diseased Hip , 1976 .