Grounded Series R-L impedance Simulator using CDDITA

The research work proposes a new grounded series R-L impedance simulator employing Current differencing differential input transconductance amplifiers (CDDITAs). The presented circuit consists of two CDDITAs along with single grounded capacitor and single grounded resistor. Some major advantages of proposed design are; (i) All the passive elements used in circuit are grounded. So, circuit is a suitable candidate for on-chip implementation, (ii) The inductive part of the realized impedance is electronically tunable through bias currents, (iii) both Inductive as well as Resistive part are independently tunable (iv) no active and/or passive element matching is required and (v)admirable performance under non-ideal environment. To show the workability and usefulness of the presented configuration a current mode low pass filter (CMLPF) is constructed. All theoretical results are verified by performing simulations under PSPICE environment.

[1]  Mayank Srivastava,et al.  New Current Mode Lossy Integrator Employing CDDITA , 2018 .

[2]  Abbdullah Yeşil,et al.  NEW DXCCII-BASED GROUNDED SERIES INDUCTANCE SIMULATOR TOPOLOGIES , 2014 .

[3]  Raj Senani Active simulation of inductors using current conveyor , 1978 .

[4]  Shahram Minaei,et al.  DXCCII-based grounded inductance simulators and filter applications , 2011, Microelectron. J..

[5]  Raj Senani New tunable synthetic floating inductors , 1980 .

[6]  R. Nandi A new equal-valued grounded-capacitor resonator realization using current conveyor , 1979, Proceedings of the IEEE.

[7]  Data Ram Bhaskar,et al.  CDDITA-Based Voltage-Mode First Order All Pass Filter Configuration , 2015 .

[8]  Oguzhan Cicekoglu,et al.  High Performance Wideband CMOS CCI and its Application in Inductance Simulator Design , 2012 .

[9]  Oguzhan Cicekoglu,et al.  Novel Lossless Grounded Inductance Simulators Employing only a Single First Generation Current Conveyor , 2003 .

[10]  Data Ram Bhaskar,et al.  Grounded and Floating Inductance Simulation Circuits Using VDTAs , 2012 .

[11]  A. J. Prescott Loss-compensated active gyrator using differential-input operational amplifiers , 1966 .

[12]  B. Metin,et al.  Supplementary Inductance Simulator Topologies Employing Single DXCCII , 2011 .

[13]  Fırat Kaçar,et al.  Lossless grounded inductance simulator employing single VDBA and its experimental band-pass filter application , 2014 .

[14]  Data Ram Bhaskar,et al.  New Grounded and Floating Simulated Inductance Circuits using Current Differencing Transconductance Amplifiers , 2010 .

[15]  Firat Kaçar,et al.  Novel grounded parallel inductance simulators realization using a minimum number of active and passive components , 2010, Microelectron. J..

[16]  R. Senani A novel application of four-terminal floating nullors , 1987, Proceedings of the IEEE.

[17]  Hakan Kuntman,et al.  Novel Two OTRA-Based Grounded Immitance Simulator Topologies , 2004 .

[18]  Firat Kaçar,et al.  New lossless inductance simulators realization using a minimum active and passive components , 2010, Microelectron. J..

[19]  D. Biolek,et al.  Active Elements for Analog Signal Processing: Classification, Review, and New Proposals , 2008 .

[20]  Uğur Çam,et al.  Realization of Series and Parallel R-L and C-D Impedances Using Single Differential Voltage Current Conveyor , 2005 .