The effect of bracing availability on one-hand isometric force exertion capability

Environmental obstructions that workers encounter can kinematically limit the postures that they can achieve. However, such obstructions can also provide an opportunity for additional support by bracing with the hand, thigh or other body part. The reaction forces on bracing surfaces, which are in addition to those acting at the feet and task hand, are hypothesised to improve force exertion capability, and become required inputs to biomechanical analysis of tasks with bracing. The effects of kinematic constraints and associated bracing opportunities on isometric hand force were quantified in a laboratory study of 22 men and women. Analyses of one-hand maximal push, pull and lift tasks demonstrated that bracing surfaces available at the thighs and non-task hand enabled participants to exert an average of 43% more force at the task hand. Task hand force direction deviated significantly from the nominal direction for exertions performed with bracing at both medium and low task hand locations. Practitioner summary: This study quantifies the effect of bracing on kinematically constrained force exertions. Knowledge that appropriate bracing surfaces can substantially increase hand force is critical to the evaluation of task-oriented strength capability. Force estimates may also involve large off-axis components, which have clear implications for ergonomic analyses of manual tasks.

[1]  Matthew P Reed,et al.  A study of the difference between nominal and actual hand forces in two-handed sagittal plane whole-body exertions , 2011, Ergonomics.

[2]  Don B. Chaffin,et al.  Volitional Postures during Maximal Push/Pull Exertions in the Sagittal Plane , 1981, Human factors.

[3]  S. Kumar Arm lift strength in work space. , 1991, Applied ergonomics.

[4]  W. T. Dempster,et al.  Force analyses of horizontal two-handed pushes and pulls in the sagittal plane. , 1956, Human biology.

[5]  Dempster Wt,et al.  Force analyses of horizontal two-handed pushes and pulls in the sagittal plane. , 1956 .

[6]  Don B. Chaffin,et al.  Volitional Postures during Maximal Push/Pull Exertions in the Sagittal Plane , 1983 .

[7]  Brian E. Maki,et al.  Efficacy of handrails in preventing stairway falls: a new experimental approach , 1998 .

[8]  S. Beaugrand,et al.  The dynamics of pushing loads onto shelves of different heights , 1992 .

[9]  Don B. Chaffin,et al.  Biomechanical Computerized Simulation of Human Strength in Sagittal-Plane Activities , 1972 .

[10]  J A GAVAN,et al.  The consistency of anthropometric measurements. , 1950, American journal of physical anthropology.

[11]  M. M. Ayoub,et al.  Effects of Operator Stance on Pushing and Pulling Tasks , 1974 .

[12]  Shrawan Kumar Upper body push-pull strength of normal young adults in sagittal plane at three heights , 1995 .

[13]  Matthew P. Reed,et al.  Force-Exertion Postures with External Bracing in Industrial Tasks: Data from an Automotive Assembly Plant , 2008 .

[14]  Christine M Haslegrave,et al.  Ready steady push – a study of the role of arm posture in manual exertions , 2008, Ergonomics.

[15]  Suzanne Groves Hoffman Whole-Body Postures during Standing Hand-Force Exertions: Development of a 3D Biomechanical Posture Prediction Model. , 2008 .

[16]  D. W. Grieve,et al.  The influence of some handle designs and handle height on the strength of the horizontal pulling action , 1992 .

[17]  K. H. Eberhard Kroemer Horizontal push and pull forces: exertable when standing in working positions on various surfaces. , 1974 .

[18]  W S Marras,et al.  Spinal loading when lifting from industrial storage bins , 2002, Ergonomics.

[19]  D. Chaffin,et al.  A proposed standard procedure for static muscle strength testing. , 1974, American Industrial Hygiene Association journal.

[20]  C M Haslegrave,et al.  Strength capability while kneeling. , 1997, Ergonomics.

[21]  Idsart Kingma,et al.  Ltd Registered in England and Wales Registered Number : 1072954 Registered office : , 2011 .

[22]  I Kingma,et al.  Force direction and physical load in dynamic pushing and pulling , 2000, Ergonomics.

[23]  Matthew P. Reed,et al.  The Effect of Bracing Availability on Force-Exertion Capability in One-Hand Isometric Pulling Tasks , 2010 .

[24]  R A Haslam,et al.  Initial force and postural adaptations when pushing and pulling on floor surfaces with good and reduced resistance to slipping , 2006, Ergonomics.

[25]  S T Pheasant,et al.  Naturally preferred directions for the exertion of maximal manual forces. , 1981, Ergonomics.

[26]  D B Chaffin,et al.  Ergonomics guide for the assessment of human static strength. , 1975, American Industrial Hygiene Association journal.

[27]  Jr. Roebuck,et al.  Anthropometric Methods: Designing to Fit the Human Body , 1995 .

[28]  C M Haslegrave,et al.  Force exertion in awkward working postures--strength capability while twisting or working overhead. , 1997, Ergonomics.

[29]  D. Anton Occupational biomechanics , 1986 .

[30]  Kevin P. Granata,et al.  Low-Back Biomechanics and Static Stability During Isometric Pushing , 2005, Hum. Factors.

[31]  W T DEMPSTER Analysis of two-handed pulls using free body diagrams. , 1958, Journal of applied physiology.

[32]  S T Pheasant,et al.  Vector representations of human strength in whole body exertion. , 1982, Applied ergonomics.

[33]  B J Daams Static force exertion in postures with different degrees of freedom. , 1993, Ergonomics.