Materials Challenges and Testing for Supply of Energy and Resources

Introduction.- Materials challenges for nuclear fission and fusion.- Materials challenges for water supply.- Challenges in conclusive, realistic and system oriented materials testing.- Extraction and recovery of scarce elements and minerals.

[1]  W. Sand,et al.  (Bio)chemistry of bacterial leaching - direct vs. indirect bioleaching , 2001 .

[2]  F. Tuinstra,et al.  Raman Spectrum of Graphite , 1970 .

[3]  Yoshiharu Morimoto,et al.  Automatic Evaluation of Mixed‐mode Stress Intensity Factors Utilizing Digital Image Correlation , 2006 .

[4]  Simon Webb,et al.  Indirect human exposure to pharmaceuticals via drinking water. , 2003, Toxicology letters.

[5]  A. Kimura,et al.  Stability of Y–Ti complex oxides in Fe–16Cr–0.1Ti ODS ferritic steel before and after heavy-ion irradiation , 2009 .

[6]  M. Afzal Ghauri,et al.  Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria , 2007 .

[7]  Marc G. D. Geers,et al.  An experimental assessment of grain size effects in the uniaxial straining of thin Al sheet with a few grains across the thickness , 2006 .

[8]  J. Greer,et al.  Enhanced resistance of single-layer graphene to ion bombardment , 2010 .

[9]  S T Aruna,et al.  COMBUSTION SYNTHESIS: AN UPDATE , 2002 .

[10]  D. Schnur,et al.  An inverse method for determining elastic material properties and a material interface , 1992 .

[11]  Gareth Hinds,et al.  Electrocatalytic activity mapping of model fuel cell catalyst films using scanning electrochemical microscopy , 2009 .

[12]  R I Lehrer,et al.  Antimicrobial peptides in mammalian and insect host defence. , 1999, Current opinion in immunology.

[13]  S. Franzen,et al.  Multifunctional gold nanoparticle-peptide complexes for nuclear targeting. , 2003, Journal of the American Chemical Society.

[14]  K. F. Russell,et al.  Characterization of precipitates in MA/ODS ferritic alloys , 2006 .

[15]  D. Chadwick,et al.  Reactivity of ceria, Gd- and Nb-doped ceria to methane , 2002 .

[16]  R. Bachofen,et al.  Development of a Laboratory-Scale Leaching Plant for Metal Extraction from Fly Ash by ThiobacillusStrains , 1998, Applied and Environmental Microbiology.

[17]  R. Cohn,et al.  Selective self-assembly at room temperature of individual freestanding Ag2Ga alloy nanoneedles , 2005 .

[18]  Edward J. Garboczi,et al.  Analysis of the impedance spectra of short conductive fiber-reinforced composites , 2001 .

[19]  S. C. Chetal,et al.  Selection of materials for prototype fast breeder reactor , 2003 .

[20]  Dongye Zhao,et al.  Manipulating the size and dispersibility of zerovalent iron nanoparticles by use of carboxymethyl cellulose stabilizers. , 2008, Environmental science & technology.

[21]  E. Longo,et al.  Room temperature co-precipitation of nanocrystalline CeO2 and Ce0.8Gd0.2O1.9−δ powder , 2007 .

[22]  W. Kenan,et al.  Impedance Spectroscopy: Emphasizing Solid Materials and Systems , 1987 .

[23]  P. Storici,et al.  An approach combining rapid cDNA amplification and chemical synthesis for the identification of novel, cathelicidin-derived, antimicrobial peptides. , 1997, Methods in molecular biology.

[24]  A. Bard,et al.  Scanning electrochemical microscopy. , 2001, Annual review of analytical chemistry.

[25]  V. Recupero,et al.  Performance of Pt/CeO2 catalyst for propane oxidative steam reforming , 2006 .

[26]  Ion Implantation in Diamond, Graphite and Related Materials , 1992 .

[27]  M. D. Rooij,et al.  Electrochemical Methods: Fundamentals and Applications , 2003 .

[28]  J. Fouletier,et al.  Catalytic properties of new anode materials for solid oxide fuel cells operated under methane at intermediary temperature , 2001 .

[29]  H. Sahl,et al.  ChBac3.4: A Novel Proline-Rich Antimicrobial Peptide from Goat Leukocytes , 2009, International Journal of Peptide Research and Therapeutics.

[30]  G. Wittstock,et al.  Influence of electrode size and geometry on electrochemical experiments with combined SECM–SFM probes , 2010, Nanotechnology.

[31]  Wei Zhan,et al.  Chemically imaging living cells by scanning electrochemical microscopy. , 2006, Biosensors & bioelectronics.

[32]  A. Wanner,et al.  Damage evolution and domain-level anisotropy in metal/ceramic composites exhibiting lamellar microstructures , 2010 .

[33]  G. Hack.  Developments in The Production of Oxide Dispersion Strengthened Superalloys , 1984 .

[34]  Siddhartha Roy,et al.  In situ Study of Internal Load Transfer in a Novel Metal/Ceramic Composite Exhibiting Lamellar Microstructure Using Energy Dispersive Synchrotron X‐ray Diffraction , 2009 .

[35]  M. Fan,et al.  Chemical degradation of drinking water disinfection byproducts by millimeter-sized particles of iron-silicon and magnesium-aluminum alloys. , 2010, Journal of the American Chemical Society.

[36]  Indrajit Charit,et al.  Structural materials for Gen-IV nuclear reactors: Challenges and opportunities , 2008 .

[37]  R. Doong,et al.  Dechlorination of tetrachloroethylene by palladized iron in the presence of humic acid. , 2005, Water research.

[38]  C. Solisio,et al.  Bioleaching of zinc and aluminium from industrial waste sludges by means of Thiobacillus ferrooxidans. , 2002, Waste management.

[39]  G. R. Odette,et al.  On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys , 2009 .

[40]  V. Leroy,et al.  Dispersion-Strengthened Ferritic Steels as Fast-Reactor Structural Materials , 1974 .

[41]  J. Bentley,et al.  Response of nanoclusters in a 9Cr ODS steel to 1 dpa, 525 °C proton irradiation , 2010 .

[42]  Kazuya Miyahara,et al.  Effect of Ti and W on the Mechanical Properties and Microstructure of 12% Cr Base Mechanical-alloyed Nano-sized ODS Ferritic Alloys , 2003 .

[43]  Maria N. Charalambides,et al.  On the mechanics of wire cutting of cheese , 2005 .

[44]  H. Atashi,et al.  Bioleaching of copper from smelter dust in a series of airlift bioreactors , 2008 .

[45]  P. Unwin,et al.  Combined scanning electrochemical-atomic force microscopy. , 2000, Analytical Chemistry.

[46]  T. Heinze,et al.  Carboxymethyl Ethers of Cellulose and Starch – A Review , 2005 .

[47]  C. Demaille,et al.  Fabrication of submicrometer-sized gold electrodes of controlled geometry for scanning electrochemical-atomic force microscopy. , 2002, Analytical chemistry.

[48]  Y. Ting,et al.  Bioleaching of spent fluid catalytic cracking catalyst using Aspergillus niger. , 2005, Journal of biotechnology.

[49]  R. L. Seliger,et al.  High‐resolution, ion‐beam processes for microstructure fabrication , 1979 .

[50]  O. B. McMahon,et al.  Terahertz photomixing with diode lasers in low‐temperature‐grown GaAs , 1995 .

[51]  Tingting Huang,et al.  Combustion synthesis of nanocrystalline ceria (CeO2) powders by a dry route , 2006 .

[52]  T. Ganz,et al.  Concurrent assessment of inner and outer membrane permeabilization and bacteriolysis in E. coli by multiple-wavelength spectrophotometry. , 1988, Journal of immunological methods.

[53]  A. Almazouzi,et al.  Development of oxides dispersion strengthened steels for high temperature nuclear reactor applications , 2009 .

[54]  A. Waring,et al.  RL-37, an Alpha-Helical Antimicrobial Peptide of the Rhesus Monkey , 2001, Antimicrobial Agents and Chemotherapy.

[55]  S. Ukai,et al.  Improvement of 9Cr-ODS martensitic steel properties by controlling excess oxygen and titanium contents , 2004 .

[56]  W. Gunter,et al.  Effect of phosphonate inhibitors on calcite nucleation kinetics as a function of temperature using light scattering in an autoclave , 1996 .

[57]  Wei-xian Zhang,et al.  Nanoscale Iron Particles for Environmental Remediation: An Overview , 2003 .

[58]  G. W. Postma.  Wave propagation in a stratified medium , 1955 .

[59]  T. Hoshino,et al.  Y2O3 evolution and dispersion refinement in Co-base ODS alloys , 2009 .

[60]  E. Garboczi,et al.  Intrinsic Conductivity of Short Conductive Fibers in Composites by Impedance Spectroscopy , 2001 .

[61]  S. Assabumrungrat,et al.  Catalytic steam reforming of ethanol over high surface area CeO2: The role of CeO2 as an internal pre-reforming catalyst , 2006 .

[62]  Anthony G. Evans,et al.  A microbend test method for measuring the plasticity length scale , 1998 .

[63]  Ke Karlovu,et al.  The bactericidal effect of silver nanoparticles , 2010 .

[64]  R. Reimert,et al.  Investigation of the structure and the redox behavior of gadolinium doped ceria to select a suitable composition for use as catalyst support in the steam reforming of natural gas , 2007 .

[65]  M. Ibarra,et al.  Metal-insulator transition in Pt-C nanowires grown by focused-ion-beam-induced deposition , 2009 .

[66]  Helen R. Watling,et al.  The bioleaching of sulphide minerals with emphasis on copper sulphides — A review , 2006 .

[67]  Wei-xian Zhang,et al.  Synthesizing Nanoscale Iron Particles for Rapid and Complete Dechlorination of TCE and PCBs , 1997 .

[68]  Olli H. Tuovinen,et al.  Acid bioleaching of solid waste materials from copper, steel and recycling industries , 2010 .

[69]  A. Krasheninnikov,et al.  Energetics, structure, and long-range interaction of vacancy-type defects in carbon nanotubes: Atomistic simulations , 2006 .

[70]  Feng-sheng Li,et al.  A facile and novel route to high surface area ceria-based nanopowders by salt-assisted solution combustion synthesis , 2006 .

[71]  Characterization of Elastoplastic Properties Based on Inverse Analysis and Finite Element Modeling of Two Separate Indenters , 2007 .

[72]  F. Zhou,et al.  Scanning electrochemical microscopy imaging of DNA microarrays using methylene blue as a redox-active intercalator. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[73]  D. Teweldebrhan,et al.  Modification of graphene properties due to electron-beam irradiation , 2008, 0812.0571.

[74]  I. Parezanović,et al.  Leaching of copper(I) sulfide in calcium chloride solution , 2000 .

[75]  Characterization of nanoscale zero valent iron modified by nonionic surfactant for trichloroethylene removal in the presence of humic acid: A research note , 2009 .

[76]  A. Krasheninnikov,et al.  Ion and electron irradiation-induced effects in nanostructured materials , 2010 .

[77]  M. M. Lucchese,et al.  Quantifying ion-induced defects and Raman relaxation length in graphene , 2010 .

[78]  B. Raj,et al.  Development and characterization of advanced 9Cr ferritic/martensitic steels for fission and fusion reactors , 2011 .

[79]  D. Elliott,et al.  Field assessment of nanoscale bimetallic particles for groundwater treatment. , 2001, Environmental science & technology.

[80]  Q. Fu,et al.  Ion irradiation induced structural and electrical transition in graphene. , 2010, The Journal of chemical physics.

[81]  P. Reinke,et al.  Characterization of focused-ion-beam induced defect structures in graphite for the future guided self-assembly of molecules , 2009 .

[82]  Dongye Zhao,et al.  Preparation and characterization of a new class of starch-stabilized bimetallic nanoparticles for degradation of chlorinated hydrocarbons in water. , 2005, Environmental science & technology.

[83]  J. Trevors,et al.  Germanium and silver resistance, accumulation, and toxicity in microorganisms. , 1992, Plasmid.

[84]  Andre K. Geim,et al.  Raman spectrum of graphene and graphene layers. , 2006, Physical review letters.

[85]  P. Unwin,et al.  Scanning Electrochemical Microscope-Induced Dissolution: Theory and Experiment for Silver Chloride Dissolution Kinetics in Aqueous Solution without Supporting Electrolyte , 1996 .

[86]  S. Thevuthasan,et al.  Radiation effects on the microstructure of a 9Cr-ODS alloy , 2008 .

[87]  C. Baker-Austin,et al.  First use of two-dimensional polyacrylamide gel electrophoresis to determine phylogenetic relationships. , 2004, Journal of microbiological methods.

[88]  C. E. Gardner,et al.  Atomic force microscopy probes go electrochemical. , 2002, Analytical chemistry.

[89]  Predicting the Mechanical Behaviour of Starch Gels through Inverse Analysis of Indentation Data , 2010 .

[90]  C. L. Dennis,et al.  Photomixing up to 3.8 THz in low‐temperature‐grown GaAs , 1995 .

[91]  I. Suzuki,et al.  Microbial leaching of metals from sulfide minerals. , 2001, Biotechnology advances.

[92]  Sanjay Sampath,et al.  Determination of properties of graded materials by inverse analysis and instrumented indentation , 2000 .

[93]  W. Sand,et al.  Bacterial Leaching of Metal Sulfides Proceeds by Two Indirect Mechanisms via Thiosulfate or via Polysulfides and Sulfur , 1999, Applied and Environmental Microbiology.

[94]  J. Robertson,et al.  Interpretation of Raman spectra of disordered and amorphous carbon , 2000 .

[95]  J. R. Jurado,et al.  Synthesis of ceria-based electrolyte nanometric powders by urea-combustion technique , 2007 .

[96]  Yuguo Zheng,et al.  Bioleaching of chromium from tannery sludge by indigenous Acidithiobacillus thiooxidans. , 2007, Journal of hazardous materials.

[97]  C. Michon,et al.  Strain-hardening properties of physical weak gels of biopolymers , 2004 .

[98]  J. Puhakka,et al.  High‐rate ferric sulfate generation by a Leptospirillum ferriphilum‐dominated biofilm and the role of jarosite in biomass retainment in a fluidized‐bed reactor , 2004, Biotechnology and bioengineering.

[99]  Hideharu Nakashima,et al.  Characterization of High Temperature Creep Properties in Recrystallized 12Cr-ODS Ferritic Steel Claddings , 2002 .

[100]  M. M. Bradford.  A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. , 1976, Analytical biochemistry.

[101]  Zhang Xi,et al.  Materials for terahertz science and technology , 2003 .

[102]  A. Jorio,et al.  Influence of the atomic structure on the Raman spectra of graphite edges. , 2004, Physical review letters.

[103]  Eduardo Saiz,et al.  Freezing as a Path to Build Complex Composites , 2006, Science.

[104]  B. Geng,et al.  Preparation of chitosan-stabilized Fe(0) nanoparticles for removal of hexavalent chromium in water. , 2009, The Science of the total environment.

[105]  M. M. Lucchese,et al.  Raman spectroscopy study of Ar+ bombardment in highly oriented pyrolytic graphite , 2009 .

[106]  Ado Jorio,et al.  General equation for the determination of the crystallite size La of nanographite by Raman spectroscopy , 2006 .

[107]  Ampere A. Tseng,et al.  Recent developments in micromilling using focused ion beam technology , 2004 .

[108]  C. Klauber,et al.  Sulphur speciation of leached chalcopyrite surfaces as determined by X-ray photoelectron spectroscopy , 2001 .

[109]  S. Harrison,et al.  Effect of solid loading on thermophilic bioleaching of sulfide minerals , 2000 .

[110]  R. Heumann,et al.  Effective transfection of cells with multi-shell calcium phosphate-DNA nanoparticles. , 2006, Biomaterials.

[111]  Arthur C. Gossard,et al.  Accurate modeling of dual dipole and slot elements used with photomixers for coherent terahertz output power , 2001 .

[112]  T. Vliet,et al.  Fracture properties of starch gels and their rate dependency , 1995 .

[113]  W. F. Ranson,et al.  Applications of digital-image-correlation techniques to experimental mechanics , 1985 .

[114]  D. Clarke,et al.  Size dependent hardness of silver single crystals , 1995 .

[115]  Min-Der Lin,et al.  Characteristics, morphology, and stabilization mechanism of PAA250K-stabilized bimetal nanoparticles , 2009 .

[116]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[117]  Fritz B. Prinz,et al.  Cantilever tip probe arrays for simultaneous SECM and AFM analysis , 2005 .

[118]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[119]  A. Wanner.  Elastic modulus measurements of extremely porous ceramic materials by ultrasonic phase spectroscopy , 1998 .

[120]  J. Clarkson,et al.  Role of metastable phases in the spontaneous precipitation of calcium carbonate , 1992 .

[121]  W. Schuhmann,et al.  Constant-distance mode AC-SECM for the visualisation of corrosion pits , 2007 .

[122]  Philippe Moulin,et al.  Effect of antiscalants on precipitation of an RO concentrate: metals precipitated and particle characteristics for several water compositions. , 2010, Water research.

[123]  K. Kurzydłowski,et al.  Investigation of fatique crack growth rate of Al 5484 ultrafine grained alloy after ECAP process , 2010 .

[124]  Mohinder S. Grewal,et al.  Kalman Filtering: Theory and Practice , 1993 .

[125]  Ulf Engel,et al.  Microforming—from basic research to its realization , 2002 .

[126]  P. Birkin,et al.  Determination of heterogeneous electron transfer kinetics in the presence of ultrasound at microelectrodes employing sampled voltammetry. , 1997, Analytical chemistry.

[127]  E. Garboczi,et al.  Impedance Spectra of Fiber-Reinforced Cement-Based Composites: A Modeling Approach , 2000 .

[128]  Stephen J. Skinner,et al.  Oxygen ion conductors , 2003 .

[129]  M. Harada,et al.  Alloying design of oxide dispersion strengthened ferritic steel for long life FBRs core materials , 1993 .

[130]  G. Lowry,et al.  Towards a definition of inorganic nanoparticles from an environmental, health and safety perspective. , 2009, Nature nanotechnology.

[131]  E. Cambril,et al.  Electrochemical atomic force microscopy using a tip-attached redox mediator for topographic and functional imaging of nanosystems. , 2009, ACS nano.

[132]  Eduardo Saiz,et al.  Ice-templated porous alumina structures , 2007, 1710.04651.

[133]  D. Wright,et al.  Biomimetic mineralization of noble metal nanoclusters. , 2003, Biomacromolecules.

[134]  T. Mahata,et al.  Combustion synthesis of gadolinia doped ceria powder , 2005 .

[135]  T. Okuda,et al.  Development of 9Cr-ODS Martensitic Steel Claddings for Fuel Pins by means of Ferrite to Austenite Phase Transformation , 2002 .

[136]  S. Richardson,et al.  Halonitromethane drinking water disinfection byproducts: chemical characterization and mammalian cell cytotoxicity and genotoxicity. , 2004, Environmental science & technology.

[137]  Yangqiao Liu,et al.  Investigation of Calcium Carbonate Scaling Inhibition and Scale Morphology by AFM. , 2001, Journal of colloid and interface science.

[138]  W. Schuhmann,et al.  Fabrication and Characterization of Needle‐Type , 2002 .

[139]  J. Wong,et al.  Bioleaching of heavy metals from anaerobically digested sewage sludge using FeS2 as an energy source. , 2004, Chemosphere.

[140]  J. Chen,et al.  Reductive dechlorination of hexachlorobenzene by Cu/Fe bimetal in the presence of nonionic surfactant. , 2009, Journal of hazardous materials.

[141]  A. K. Tyagi,et al.  Combustion synthesis of gadolinia-doped ceria using glycine and urea fuels , 2008 .

[142]  Yixian Wang,et al.  Nanoscale imaging of surface topography and reactivity with the scanning electrochemical microscope. , 2009, Analytical chemistry.

[143]  G. Righini,et al.  Novel Au/La1−xSrxMnO3 and Au/La1−xSrxCrO3 composites: Catalytic activity for propane partial oxidation and reforming , 2007 .

[144]  C. Klauber.  A critical review of the surface chemistry of acidic ferric sulphate dissolution of chalcopyrite with regards to hindered dissolution , 2008 .

[145]  D. Teweldebrhan,et al.  High-temperature quenching of electrical resistance in graphene interconnects , 2008 .

[146]  Du Tran,et al.  Monitoring pozzolanic activity by direct activation with calcium hydroxide , 1996 .

[147]  R. Hancock,et al.  Antimicrobial and host-defense peptides as new anti-infective therapeutic strategies , 2006, Nature Biotechnology.

[148]  Lucille A. Giannuzzi,et al.  Introduction to focused ion beams : instrumentation, theory, techniques, and practice , 2010 .

[149]  Robert Puers,et al.  A review of focused ion beam applications in microsystem technology , 2001 .

[150]  R. Hancock,et al.  The role of cationic antimicrobial peptides in innate host defences. , 2000, Trends in microbiology.

[151]  Suttichai Assabumrungrat,et al.  Methane steam reforming over Ni/Ce-ZrO2 catalyst : Influences of Ce-ZrO2 support on reactivity, resistance toward carbon formation, and intrinsic reaction kinetics , 2005 .

[152]  S. Assabumrungrat,et al.  Combustion Synthesis of Ce0.9Gd0.1O1.95 for Use as an Electrolyte for SOFCs , 2008 .

[153]  J. Kašpar,et al.  Modification of the Redox Behaviour of CeO2Induced by Structural Doping with ZrO2 , 1996 .

[154]  David L Sedlak,et al.  Factors affecting the yield of oxidants from the reaction of nanoparticulate zero-valent iron and oxygen. , 2008, Environmental science & technology.

[155]  S. Stevens,et al.  Multiple parameters for the comprehensive evaluation of the susceptibility of Escherichia coli to the silver ion , 2004, Biometals.

[156]  A. Alessandrini,et al.  Focused ion beam-nanomachined probes for improved electric force microscopy. , 2005, Ultramicroscopy.

[157]  J. Giérak,et al.  Ion beam nanopatterning in graphite: characterization of single extended defects , 2008, Nanotechnology.

[158]  R. Oberacker,et al.  Control of Lamellae Spacing During Freeze Casting of Ceramics Using Double‐Side Cooling as a Novel Processing Route , 2009 .

[159]  J. Villeneuve,et al.  Fast breeder reactor fuel design principles and performance , 1989 .

[160]  Steven G. Louie,et al.  Anisotropic behaviours of massless Dirac fermions in graphene under periodic potentials , 2008, 0803.0306.

[161]  G. Sayles,et al.  DDT, DDD, and DDE Dechlorination by Zero-Valent Iron , 1997 .

[162]  K. F. Russell,et al.  Nanometer scale precipitation in ferritic MA/ODS alloy MA957 , 2004 .

[163]  John T. S. Irvine,et al.  Electroceramics: Characterization by Impedance Spectroscopy , 1990 .

[164]  S. Assabumrungrat,et al.  The effect of specific surface area on the activity of nano-scale ceria catalysts for methanol decomposition with and without steam at SOFC operating temperatures , 2006 .

[165]  Jong-Gwan Ahn,et al.  Bioleaching of metals from spent lithium ion secondary batteries using Acidithiobacillus ferrooxidans. , 2008, Waste management.

[166]  P. Dobson,et al.  Nanowire probes for high resolution combined scanning electrochemical microscopy - atomic force microscopy. , 2005, Nano letters.

[167]  Hsun Hu,et al.  TEXTURE OF METALS , 1974 .

[168]  J. E. Bauerle.  Study of solid electrolyte polarization by a complex admittance method , 1969 .

[169]  J. Giérak.  Focused ion beam technology and ultimate applications , 2009 .

[170]  B. Mizaikoff,et al.  Combined scanning electrochemical atomic force microscopy for tapping mode imaging , 2003 .

[171]  Andreas Mortensen,et al.  Metal Matrix Composites , 2010 .

[172]  D. DeMarini,et al.  Occurrence, genotoxicity, and carcinogenicity of regulated and emerging disinfection by-products in drinking water: a review and roadmap for research. , 2007, Mutation research.

[173]  M. Jeffrey,et al.  The effect of chloride ions on the dissolution of chalcopyrite in acidic solutions , 2000 .

[174]  E. W. Brown,et al.  The effect of friction , 1932 .

[175]  Nakamura,et al.  Ion-irradiation effects on the phonon correlation length of graphite studied by Raman spectroscopy. , 1992, Physical review. B, Condensed matter.

[176]  Suresh C. Sharma,et al.  Synthesis of nanocrystalline yttria doped ceria powder by urea-formaldehyde polymer gel auto-combustion process , 2007 .

[177]  K. Fukushi,et al.  Transformation kinetics of monohydrocalcite to aragonite in aqueous solutions , 2008 .

[178]  S. Richardson,et al.  Occurrence, synthesis, and mammalian cell cytotoxicity and genotoxicity of haloacetamides: an emerging class of nitrogenous drinking water disinfection byproducts. , 2008, Environmental science & technology.

[179]  D. Dimiduk,et al.  Dislocation structures and their relationship to strength in deformed nickel microcrystals , 2008 .

[180]  M. Ashby,et al.  Strain gradient plasticity: Theory and experiment , 1994 .

[181]  Stuart H. Taylor,et al.  Total oxidation of naphthalene with high selectivity using a ceria catalyst prepared by a combustion method employing ethylene glycol. , 2009, Journal of hazardous materials.

[182]  M. Sutton,et al.  Application Of Digital Correlation Methods To Rigid Body Mechanics , 1983 .

[183]  W. Peters,et al.  Digital Imaging Techniques In Experimental Stress Analysis , 1982 .