Morphological Analysis of Slip-Cast Emulsion-Templated Alumina Foams by Microfocus Computer Tomography

Bulk alumina foams were generated by slip casting of suspensions combined with particle-stabilized emulsion droplets as pore templates. Because of the volatile nature of the template, the green foams could be consolidated by sintering without a debinding step. The porous structure of the consolidated foams was analyzed nondestructively using image analysis of microfocus computer tomography (micro-CT) data. The fraction of open and closed pores, as well as the pore sizes and pore size distributions, were calculated from the generated 3D micro-CT datasets and correlated to the applied processing parameters. The anisotropy in the produced structures was assessed and elucidated by a detailed analysis of segmented tomography data. The results indicate that the width of the pore size distribution and the average macropore size, ranging from 225 to 136 lm, depend on the slip rheology. Any anisotropy caused in the structure was linked to the template preparation but is only present in a narrow zone near the bottom of the foams. Although the macroporosity ( � 20 lm) was only 24%–31%, tomographic analysis showed that over 90% of these macropores were interconnected through � 20-lm-diameter windows.

[1]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[2]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[3]  Christopher W. Macosko,et al.  Rheology: Principles, Measurements, and Applications , 1994 .

[4]  P. Rüegsegger,et al.  A new method for the model‐independent assessment of thickness in three‐dimensional images , 1997 .

[5]  TOR Hildebrand,et al.  Quantification of Bone Microarchitecture with the Structure Model Index. , 1997, Computer methods in biomechanics and biomedical engineering.

[6]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[7]  Edouard Thiel,et al.  Medial axis for chamfer distances: computing look-up tables and neighbourhoods in 2D or 3D , 2002, Pattern Recognit. Lett..

[8]  Bernard P. Binks,et al.  Emulsions stabilised solely by colloidal particles , 2003 .

[9]  V. Schmitt,et al.  Materials based on solid-stabilized emulsions. , 2004, Journal of colloid and interface science.

[10]  Jing-Song Pan,et al.  Sintering Kinetics of Large Pores , 2005 .

[11]  André R Studart,et al.  Ultrastable particle-stabilized foams. , 2006, Angewandte Chemie.

[12]  Dietmar W Hutmacher,et al.  A comparison of micro CT with other techniques used in the characterization of scaffolds. , 2006, Biomaterials.

[13]  E. Maire,et al.  Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography , 2007 .

[14]  J. Fransaer,et al.  Production of Porous Materials Through Consolidation of Pickering Emulsions , 2007 .

[15]  J. Schrooten,et al.  Validation of x-ray microfocus computed tomography as an imaging tool for porous structures. , 2008, The Review of scientific instruments.

[16]  J. Fransaer,et al.  Electrophoretic Deposition of Liquid Templates , 2009 .

[17]  Ilke Akartuna,et al.  Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[18]  S. Barg,et al.  Cellular ceramics by direct foaming of emulsified ceramic powder suspensions , 2008 .

[19]  S. Barg,et al.  New cellular ceramics from high alkane phase emulsified suspensions (HAPES) , 2009 .