High strength Mg/Nb nanolayer composites

Abstract We report on the microstructure and mechanical properties of sputter-deposited Mg/Nb multilayer films, with individual layer thickness, h , of 2.5–200 nm. High resolution TEM studies reveal the formation of metastable Mg with body-centered cubic structure along interface in multilayers with h of 5 nm or less. As h decreases, the hardnesses of multilayers increase and approach a maximum of ∼2.7 GPa at a few nm layer thickness. Size dependent strengthening in Mg/Nb multilayers is compared to that in Mg with various grain sizes, and Cu/Nb and Al/Nb multilayers, and strengthening mechanisms in Mg/Nb multilayers are discussed.

[1]  Amit Misra,et al.  Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites , 2005 .

[2]  M. Anglada,et al.  Contact Deformation Regimes Around Sharp Indentations and the Concept of the Characteristic Strain , 2002 .

[3]  M. Nastasi,et al.  Observation of body centered cubic Cu in Cu/Nb nanolayered composites , 1997 .

[4]  N. Schell,et al.  Hardness in Ag/Ni, Au/Ni and Cu/Ni multilayers , 2001 .

[5]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[6]  E. Maawad,et al.  Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB) , 2010 .

[7]  H. Fraser,et al.  Stability of f.c.c. titanium in titanium/aluminum multilayers , 1999 .

[8]  J. Hirth,et al.  On the role of weak interfaces in blocking slip in nanoscale layered composites , 2006 .

[9]  Rajarshi Banerjee,et al.  Polymorphic phase stability in thin multilayers , 1998 .

[10]  T. Foecke,et al.  Deformation and fracture in microlaminates , 1996 .

[11]  J. Embury,et al.  On dislocation storage and the mechanical response of fine scale microstructures , 1994 .

[12]  J. Koehler.  Attempt to Design a Strong Solid , 1970 .

[13]  P. Anderson,et al.  Hall-Petch relations for multilayered materials , 1995 .

[14]  I. Schuller.  New class of layered materials , 1980 .

[15]  Mingxing Zhang,et al.  Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy , 2007 .

[16]  S. I. Rao,et al.  Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system , 2000 .

[17]  T. Langdon,et al.  Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation , 2001 .

[18]  Amit Misra,et al.  Single-dislocation-based strengthening mechanisms in nanoscale metallic multilayers , 2002 .

[19]  Nan Li,et al.  Mechanical properties of sputtered Cu/V and Al/Nb multilayer films , 2008 .

[20]  S. Qadri,et al.  Low-dimension structural properties and microindentation studies of ion-beam-sputtered multilayers of Ag/Al films , 1994 .

[21]  Robert W. Cahn,et al.  Plastic deformation and fracture of materials , 1993 .

[22]  Amit Misra,et al.  Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites , 1998 .

[23]  M. Nastasi,et al.  Microstructure and electronic properties of Cu/Mo multilayers and three-dimensional arrays of nanocrystalline Cu precipitates embedded in a Mo matrix , 2004 .

[24]  Nan Li,et al.  Size dependent strengthening mechanisms in sputtered Fe/W multilayers , 2010 .

[25]  S. Barnett,et al.  Structure and Strength of Multilayers , 1999 .

[26]  A. Misra,et al.  Deformation Behavior of Nanostructured Metallic Multilayers , 2001 .

[27]  M. Wall,et al.  Formation of face-centered cubic titanium on a Ni single crystal and in Ni/Ti multilayers , 1994 .

[28]  W. Nix,et al.  A model for dislocation behavior during deformation of Al/Al3Sc (fcc/L12) metallic multilayers , 2003 .

[29]  Schuller,et al.  Structural refinement of superlattices from x-ray diffraction. , 1992, Physical review. B, Condensed matter.

[30]  S. Miura,et al.  Effect of deformation temperature on Hall–Petch relationship registered for polycrystalline magnesium , 2004 .

[31]  Xiaojun Wang,et al.  Microstructure and tensile property of the ECAPed pure magnesium , 2009 .

[32]  S. Barnett,et al.  Model of superlattice yield stress and hardness enhancements , 1995 .