A miniaturized ultrathin slab gel electrophoresis (MUSGE) apparatus was developed, and fast separation of DNA fragments was obtained using it. To obtain sufficient separation efficiency in a limited space, a discontinuous buffer system was used. In general, it is difficult to cast a discontinuous ultrathin slab gel of adequate quality. However, the miniaturized resolving gel could be cast by taking advantage of the "capillary phenomenon" of the ultrathin channel. A gradient plate was used to control the height of the resolving gel and to form a clear interface between the concentrating gel and the resolving gel. This method was used to cast multiple gels simultaneously and reproducibly. The gradient plate also facilitated sample introduction, which was carried out by using a micropipet. A 25-mm-long and 80-micron thick-resolving gel was used to separate the 100-base pair ladder DNA within 10 min. Bandwidth was reduced to 100-200 microns, thus improving the number of theoretical plates to 22,000, which was comparable to that in conventional slab gel electrophoresis even though the migration distance was reduced to 1/10. Satisfactory lane-to-lane reproducibility (RSD < 1.0%, n = 6) and gel-to-gel reproducibility (RSD < 2.7%, n = 4) were obtained. Finally, the MUSGE apparatus was successfully applied to get a rapid genetic diagnosis.