Simultaneous Energy Recovery from Waste Polymers in Biodiesel and Improving Fuel Properties

[1]  C. Lee,et al.  Influence of soybean biodiesel content on basic properties of biodiesel-diesel blends , 2014 .

[2]  Ismael Díaz,et al.  Polymer–solvent interaction parameters of SBS rubbers by inverse gas chromatography measurements , 2011 .

[3]  Mohammad. Rasul,et al.  Analysis and comparison of performance and emissions of an internal combustion engine fuelled with petroleum diesel and different bio-diesels , 2011 .

[4]  Sylvain-Didier B. Kouame,et al.  Comparative characterization of Jatropha,soybean and commercial biodiesel , 2011 .

[5]  Matthieu Tubino,et al.  Determining the residual alcohol in biodiesel through its flash point , 2011 .

[6]  C. Boshui,et al.  Effect of cold flow improvers on flow properties of soybean biodiesel , 2010 .

[7]  J. Tian,et al.  The phase behavior and the Flory–Huggins interaction parameter of blends containing amorphous poly(resorcinol phthalate-block-carbonate), poly(bisphenol-A carbonate) and poly(ethylene terephthalate) , 2010 .

[8]  B. Narasimhan,et al.  Dissolution of waste plastics in biodiesel , 2010 .

[9]  A. Marzocca,et al.  Evaluation of the polymer-solvent interaction parameter χ for the system cured polybutadiene rubber and toluene , 2010 .

[10]  G. Knothe,et al.  Evaluation of biodiesel obtained from cottonseed oil , 2009 .

[11]  Yongsheng Guo,et al.  Study on volatility and flash point of the pseudo-binary mixtures of sunflowerseed-based biodiesel+ethanol. , 2009, Journal of hazardous materials.

[12]  Cherng-Yuan Lin,et al.  Engine performance and emission characteristics of marine fish-oil biodiesel produced from the discarded parts of marine fish , 2009 .

[13]  Yongsheng Guo,et al.  Study on volatility and flash point of the pseudo binary mixtures of sunflower-based biodiesel + methylcyclohexane , 2009 .

[14]  Mustafa Canakci,et al.  Determination of the density and the viscosities of biodiesel–diesel fuel blends , 2008 .

[15]  Gerhard Knothe,et al.  Kinematic viscosity of biodiesel components (fatty acid alkyl esters) and related compounds at low temperatures , 2007 .

[16]  Bolun Yang,et al.  Predicting the viscosity of biodiesel fuels based on the mixture topological index method , 2007 .

[17]  Lilian L. N. Guarieiro,et al.  The Role of Additives for Diesel and Diesel Blended (Ethanol or Biodiesel) Fuels: A Review , 2007 .

[18]  G. Ovejero,et al.  Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity , 2007 .

[19]  C. Lacaze-Dufaure,et al.  Fatty Acid Methyl Esters as Biosolvents of Epoxy Resins: A Physicochemical Study , 2007 .

[20]  Yong Wang,et al.  COMPARISON OF TWO DIFFERENT PROCESSES TO SYNTHESIZE BIODIESEL BY WASTE COOKING OIL , 2006 .

[21]  G. Knothe,et al.  Kinematic viscosity of biodiesel fuel components and related compounds. Influence of compound structure and comparison to petrodiesel fuel components , 2005 .

[22]  Jianbo Hu,et al.  Study on the Solvent Power of a New Green Solvent: Biodiesel , 2004 .

[23]  T. Hjertberg,et al.  Chemical degradation of a polypropylene material exposed to simulated recycling , 2004 .

[24]  Y. Ohama,et al.  Development and testing of polystyrene mortars using waste EPS solution-based binders , 2004 .

[25]  C. P. Buckley,et al.  Introduction to physical polymer science , 1993 .

[26]  Allan F. M. Barton,et al.  CRC Handbook of solubility parameters and other cohesion parameters , 1983 .

[27]  T. Chastek,et al.  Improving cold flow properties of canola-based biodiesel , 2011 .

[28]  Meisam Tabatabaei,et al.  Upstream and downstream strategies to economize biodiesel production. , 2011, Bioresource technology.

[29]  Metin Gumus,et al.  Performance and emission evaluation of a compression ignition engine using a biodiesel (apricot seed kernel oil methyl ester) and its blends with diesel fuel , 2010 .

[30]  Dipti Singh,et al.  Biodiesel production through the use of different sources and characterization of oils and their esters as the substitute of diesel: A review , 2010 .

[31]  Kumar Reddy,et al.  Comparision of Diesel Engine Performance and Emissions from Neat and Transesterified Cotton Seed Oil , 2009 .

[32]  D. Visco,et al.  A review of physical and kinetic models of thermal degradation of expanded polystyrene foam and their application to the lost foam casting process , 2007 .