Improved machinability of single crystal silicon by applying in-situ laser-vibration hybrid assisted diamond cutting

[1]  Canbin Zhang,et al.  Micro/nano incremental material removal mechanisms in high-frequency ultrasonic vibration-assisted cutting of 316L stainless steel , 2023, International Journal of Machine Tools and Manufacture.

[2]  Jianguo Zhang,et al.  Analytical modeling of subsurface damage and material removal energy in elliptical vibration cutting of micro-structures on brittle materials , 2023, Journal of Materials Research and Technology.

[3]  Zhenfeng Shen,et al.  Investigation on the machinability of copper-coated monocrystalline silicon by applying elliptical vibration diamond cutting , 2023, Precision Engineering.

[4]  Zhenfeng Shen,et al.  Investigation of the material removal process in in-situ laser-assisted diamond cutting of reaction-bonded silicon carbide , 2023, Journal of the European Ceramic Society.

[5]  Jianguo Zhang,et al.  Experimental investigation on laser in-situ assisted ultra-precision cutting of fused silica , 2022, Symposium on Novel Photoelectronic Detection Technology and Application.

[6]  F. Fang,et al.  Surface generation of tungsten carbide in laser-assisted diamond turning , 2021 .

[7]  Jianguo Zhang,et al.  Numerical investigation on subsurface damage in nanometric cutting of single-crystal silicon at elevated temperatures , 2021, Journal of Manufacturing Processes.

[8]  F. Fang,et al.  Advances in laser assisted machining of hard and brittle materials , 2020 .

[9]  Hossein Shahinian,et al.  Microlaser assisted diamond turning of precision silicon optics , 2019, Optical Engineering.

[10]  S. To,et al.  A novel ductile machining model of single-crystal silicon for freeform surfaces with large azimuthal height variation by ultra-precision fly cutting , 2018, International Journal of Machine Tools and Manufacture.

[11]  Dazhong Wang,et al.  Numerical investigation of the performance of elliptical vibration cutting in machining of AISI 1045 steel , 2018, The International Journal of Advanced Manufacturing Technology.

[12]  Wei Wang,et al.  Controlled material removal mode and depth of micro cracks in precision grinding of fused silica – A theoretical model and experimental verification , 2017 .

[13]  Junjie Zhang,et al.  Sculpturing of single crystal silicon microstructures by elliptical vibration cutting , 2017 .

[14]  Jiwang Yan,et al.  Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo , 2017 .

[15]  Hongjin Jung,et al.  Elliptical vibration cutting of hardened die steel with coated carbide tools , 2016 .

[16]  Eiji Shamoto,et al.  Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond , 2014 .

[17]  V. Silberschmidt,et al.  Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning , 2014 .

[18]  Sandip Patil,et al.  Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. , 2014, Ultrasonics.

[19]  Hongwei Zhao,et al.  A study on phase transformation of monocrystalline silicon due to ultra-precision polishing by molecular dynamics simulation , 2012 .

[20]  Fritz Klocke,et al.  Analysis on ductile mode processing of binderless, nano crystalline tungsten carbide through ultra precision diamond turning , 2012 .

[21]  Wei Wang,et al.  Anisotropy of machined surfaces involved in the ultra-precision turning of single-crystal silicon—a simulation and experimental study , 2012 .

[22]  Ramsey F. Hamade,et al.  BUEVA: a bi-directional ultrasonic elliptical vibration actuator for micromachining , 2012 .

[23]  Mahmudur Rahman,et al.  Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting , 2011 .

[24]  Kai Cheng,et al.  Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling , 2010 .

[25]  Jiwang Yan,et al.  Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining , 2009 .

[26]  M. Rahman,et al.  A study on ultrasonic elliptical vibration cutting of tungsten carbide , 2009 .

[27]  Dipankar Ghosh,et al.  Measurement of scratch-induced residual stress within SiC grains in ZrB2–SiC composite using micro-Raman spectroscopy , 2008 .

[28]  S. Melkote,et al.  Characterization of a hybrid laser-assisted mechanical micromachining (LAMM) process for a difficult-to-machine material , 2007 .

[29]  Jay C. Rozzi,et al.  Laser-assisted pre-finishing of optical ceramic materials , 2007, SPIE Defense + Commercial Sensing.

[30]  Paul Shore,et al.  3D characterisation of tool wear whilst diamond turning silicon , 2007 .

[31]  Fengzhou Fang,et al.  Modelling and experimental investigation on nanometric cutting of monocrystalline silicon , 2005 .

[32]  Zhenkun Lei,et al.  An application of Raman spectroscopy on the measurement of residual stress in porous silicon , 2005 .

[33]  Eiji Shamoto,et al.  Study of machining accuracy in ultrasonic elliptical vibration cutting , 2004 .

[34]  E. Makino,et al.  Ductile-regime turning mechanism of single-crystal silicon , 1996 .

[35]  Yi He,et al.  Subsurface damage in laser-assisted machining titanium alloys , 2023, International Journal of Mechanical Sciences.

[36]  A. Hartmaier,et al.  Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting , 2021 .

[37]  Sandy To,et al.  Diamond tool wear in ultra-precision machining , 2017 .

[38]  Robert Lewis Reuben,et al.  Diamond machining of silicon: A review of advances in molecular dynamics simulation , 2015 .

[39]  Mahmudur Rahman,et al.  A predictive model of the critical undeformed chip thickness for ductile–brittle transition in nano-machining of brittle materials , 2013 .

[40]  E. Shamoto,et al.  Elliptical Vibration Cutting of Tungsten Alloy Molds for Optical Glass Parts , 2007 .

[41]  Eiji Shamoto,et al.  Study on Elliptical Vibration Cutting , 1994 .