Optimal transition trajectory for waypoint following

This paper discusses the problem of a turn-rate constrained vehicle, such as a fixed-wing MAV (miniature air vehicle) required to fly along the path defined by a series of waypoints. An extremal path, named as γ-trajectory, that transitions between two consecutive waypoint segments (obtained by joining two waypoints in sequence) in a timeoptimal fashion, is obtained. This algorithm is also used to track the maximum portion of waypoint segments with the desired shortest distance between the trajectory and the associated waypoint. Subsequently, the proposed trajectory is compared with existing transition trajectory in the literature to show better performance in several aspects.

[1]  H. Sussmann.  Shortest 3-dimensional paths with a prescribed curvature bound , 1995, Proceedings of 1995 34th IEEE Conference on Decision and Control.

[2]  Barry L. Spletzer,et al.  Optimal turning path generation for unmanned aerial vehicles , 2007 .

[3]  Dong Sun,et al.  Integrated design of trajectory planning and control for micro air vehicles , 2007 .

[4]  Timothy W. McLain,et al.  Real-time dynamic trajectory smoothing for unmanned air vehicles , 2005, IEEE Transactions on Control Systems Technology.

[5]  Changdon Kee,et al.  Integrated waypoint path generation and following of an unmanned aerial vehicle , 2010 .

[6]  A. R. Babaei,et al.  Fast trajectory planning based on in‐flight waypoints for unmanned aerial vehicles , 2010 .

[7]  Barbara Savini,et al.  Path Planning for Autonomous Vehicles by Trajectory Smoothing Using Motion Primitives , 2008, IEEE Transactions on Control Systems Technology.

[8]  Ick Ho Whang,et al.  Horizontal waypoint guidance design using optimal control , 2002 .

[9]  A. R. Babaei,et al.  Three-Dimensional Curvature-Constrained Trajectory Planning Based on In-Flight Waypoints , 2010 .

[10]  Debasish Ghose,et al.  A modified Dubins method for optimal path planning of a Miniature Air Vehicle converging to a straight line path , 2009, 2009 American Control Conference.

[11]  Anil V. Rao,et al.  Practical Methods for Optimal Control Using Nonlinear Programming , 1987 .

[12]  Debasish Ghose,et al.  Optimal path planning for an aerial vehicle in 3D space , 2010, 49th IEEE Conference on Decision and Control (CDC).

[13]  Debasish Ghose,et al.  Optimal geometrical path in 3D with curvature constraint , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[14]  L. Dubins.  On Curves of Minimal Length with a Constraint on Average Curvature, and with Prescribed Initial and Terminal Positions and Tangents , 1957 .