We are developing a 1 mm3 resolution breast-dedicated Positron Emission Tomography (PET) system in an effort to increase the role of PET in earlier stages of breast cancer management. The system consists of two 16 cm × 9 cm × 2 cm detector panels constructed using stacked layers of 8×8 arrays of 1 mm3 LSO scintillation crystals coupled to Position Sensitive Avalanche Photodiodes (PSAPDs). Preliminary detector characterization indicates that analog multiplexed PSAPD signals coupled to ASIC readout electronics are able to resolve the 8×8 arrays of LSO crystals with an average peak-to-valley ratio of about 14, an energy resolution of 14.4% ± 0.8% at FWHM for the 511 keV photo-peak, and a paired coincidence photon time resolution of 7.3 ± 0.2 ns FWHM using the ASIC (5.2 ± 0.1 ns FHWM unpaired photon time resolution). Each 1 cm2 area PSAPD chip under bias generates 2 to 4 mW of power, and thus thermal regulation is required. A finite volume simulation of the detectors with thermal regulation features incorporated in the panels indicates that the maximum temperature variation across the thermally regulated imaging head is 4 degrees Celsius.
[1]
Craig S. Levin,et al.
Fast, Accurate and Shift-Varying Line Projections for Iterative Reconstruction Using the GPU
,
2009,
IEEE Transactions on Medical Imaging.
[2]
P. Olcott,et al.
Study of the performance of a novel 1 mm resolution dual-panel PET camera design dedicated to breast cancer imaging using Monte Carlo simulation.
,
2007,
Medical physics.
[3]
C. Levin,et al.
Convex optimization of coincidence time resolution for high resolution PET systems
,
2008
.
[4]
C. Levin,et al.
Effects of thermal regulation structures on the photon sensitivity and spatial resolution of a 1 mm3 resolution breast-dedicated PET system
,
2008,
2008 IEEE Nuclear Science Symposium Conference Record.