Anti-ablation behavior of air plasma-sprayed Mo(Si, Al)2 coating

[1]  Haifeng Cheng,et al.  Densification behavior and microstructure of mullite obtained from diphasic Al2O3–SiO2 gels , 2014 .

[2]  Hejun Li,et al.  Ablation mechanism of SiC coated C/C composites at 0° angle in two flame conditions under an oxyacetylene flame , 2014 .

[3]  M. Khajelakzay,et al.  The effect of argon shielding gas at plasma spray process on the structure and properties of MoSi2 coating , 2014 .

[4]  S. Spriano,et al.  Microstructure and transformation temperatures in rapid solidified Ni–Ti alloys. Part I: The effect of cooling rate , 2014 .

[5]  K. Hellström,et al.  Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 °C in dry air , 2013, Journal of Materials Science.

[6]  L. Roué,et al.  Effect of Al addition on the microstructure and low-temperature reactivity to oxygen of pre-formed MoSi2 , 2012, Journal of Materials Science.

[7]  S. Majumdar,et al.  Oxidation behavior of MoSi2 and Mo(Si, Al)2 coated Mo–0.5Ti–0.1Zr–0.02C alloy , 2011 .

[8]  W. Shaojie,et al.  Vacuum Poloidal Magnetic Field of Tokamak in Alternating-Current Operation , 2010 .

[9]  Liping Huang,et al.  Oxidation behavior of Al2O3 reinforced MoSi2 composite coatings fabricated by vacuum plasma spraying , 2010 .

[10]  Chungen Zhou,et al.  Development and oxidation resistance of air plasma sprayed Mo–Si–Al coating on an Nbss/Nb5Si3 in situ composite , 2010 .

[11]  K. Hellström,et al.  Oxidation behavior of a Mo (Si, Al)2-based composite at 300–1000 °C , 2010 .

[12]  M. Boulos,et al.  Development of Nanopowder Synthesis Using Induction Plasma , 2010 .

[13]  Bao-rang Li,et al.  Microstructure and oxidation resistance of Mo–Si and Mo–Si–Al alloy coatings prepared by electro-thermal explosion ultrahigh speed spraying , 2009 .

[14]  M. Abbasi,et al.  Lattice variations and phase evolutions during combustion reactions in Mo–Si–Al system , 2009 .

[15]  H. Schneider,et al.  Structure and properties of mullite—A review , 2008 .

[16]  Ke Yang,et al.  Ablation behaviors of ultra-high temperature ceramic composites , 2007 .

[17]  S. Suib,et al.  Formation of MoSi2–SiO2 coatings on molybdenum substrates by CVD/MOCVD , 2006 .

[18]  R. Khanna,et al.  Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo,Cr)(Si,Al)2 intermetallic alloy–SiC composite processed by reaction hot pressing , 2004 .

[19]  S. Hanada,et al.  Influences of Al content and secondary phase of Mo5(Si,Al)3 on the oxidation resistance of Al-rich Mo(Si,Al)2-base composites , 2003 .

[20]  Gyeungho Kim,et al.  Simultaneous growth mechanism of intermediate silicides in MoSi2/Mo system , 2001 .

[21]  G. Shao,et al.  Thermodynamic reassessment of the Mo–Si and Al–Mo–Si systems , 2000 .

[22]  T. Maruyama,et al.  High temperature oxidation and pesting of Mo(Si,Al)2 , 1997 .

[23]  A. Rahmel,et al.  Oxidation of the intermetallics MoSi2 and TiSi2—A comparison , 1997 .

[24]  P. Tsakiropoulos,et al.  Study of the Effects of Al, Ta, W Additions on the Microstructure and Properties of Mosi 2 Base Alloys , 1994 .

[25]  E. Courtright,et al.  Engineering limitations of MoSi2 coatings , 1992 .

[26]  I. Low,et al.  The origins of mullite formation , 1989 .