Measurements of the mechanical response of unidirectional 3D-printed PLA
暂无分享,去创建一个
Yong Li | Vito L. Tagarielli | Koon-Yang Lee | V. Tagarielli | Y. Song | W. Song | K. Yee | W. Song | Yong Li | Koon-Yang Lee | Y. Song | K. Yee | Y. Song | Y. Song
[1] A. M. El-hadi,et al. Correlation between degree of crystallinity, morphology, glass temperature, mechanical properties and biodegradation of poly (3-hydroxyalkanoate) PHAs and their blends , 2002 .
[2] Agnes Bagsik,et al. MECHANICAL PROPERTIES OF FUSED DEPOSITION MODELING PARTS MANUFACTURED WITH ULTEM*9085 , 2011 .
[3] O. Es-Said,et al. Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples , 2000 .
[4] Selçuk Güçeri,et al. Mechanical characterization of parts fabricated using fused deposition modeling , 2003 .
[5] S. Vel,et al. Multi-objective optimization of functionally graded materials with temperature-dependent material properties , 2007 .
[6] Guanglei Xiong,et al. Current progress in 3D printing for cardiovascular tissue engineering , 2015, Biomedical materials.
[7] W. Cantwell,et al. The Influence of Cooling Rate on the Fracture Properties of a Thermoplastic-Based Fibre-Metal Laminate , 2002 .
[8] Liang Hou,et al. Additive manufacturing and its societal impact: a literature review , 2013 .
[9] J. Jun,et al. Study of Thermoplastic PLA Foam Extrusion , 2008 .
[10] A. F. Silva,et al. Fused deposition modeling with polypropylene , 2015 .
[11] Joshua M. Pearce,et al. Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions , 2014 .
[12] Ross R. Muth,et al. Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1 , 1979 .
[13] Charlotte K. Williams,et al. Bacterial cellulose nanopaper as reinforcement for polylactide composites: renewable thermoplastic NanoPaPreg. , 2014, Macromolecular rapid communications.
[14] J. Whitney,et al. EXPERIMENTAL METHODS FOR DETERMINING SHEAR MODULUS OF FIBER REINFORCED COMPOSITE MATERIALS , 1965 .
[15] Ján Slota,et al. Influence of printing conditions on structure in FDM prototypes , 2013 .
[16] Ali P. Gordon,et al. Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives , 2015, JOM.
[17] Dayakar Penumadu,et al. Structure–mechanical property relationship in fused deposition modelling , 2015 .
[18] Alexander A. Pasko,et al. Virtual Sculpting and 3D Printing for Young People with Disabilities , 2016, IEEE Computer Graphics and Applications.
[19] Todd Letcher,et al. Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer , 2014 .
[20] R. Hill. A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[21] Caroline Sunyong Lee,et al. Measurement of anisotropic compressive strength of rapid prototyping parts , 2007 .
[22] Mehrdad Haghi,et al. Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate , 2014 .
[23] Matthew Di Prima,et al. On reducing anisotropy in 3D printed polymers via ionizing radiation , 2014 .
[24] A. K. Sood,et al. Parametric appraisal of mechanical property of fused deposition modelling processed parts , 2010 .
[25] Alexander Tsouknidas,et al. Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling , 2016 .
[26] Joseph J. Beaman,et al. Process and control issues in selective laser sintering , 1988 .
[27] Wales. Fast, Precise, Safe Prototypes with FDM , 1991 .
[28] P. McHugh,et al. Dependence of mechanical properties of polyamide components on build parameters in the SLS process , 2007 .
[29] D. Dimitrov,et al. Investigating the achievable accuracy of three dimensional printing , 2006 .
[30] J. Sarasua,et al. Crystallization and thermal behaviour of optically pure polylactides and their blends , 2005 .
[31] M. Cima,et al. Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing. , 1996, Journal of biomaterials science. Polymer edition.
[32] Duc Truong Pham,et al. A comparison of rapid prototyping technologies , 1998 .
[33] A. Maazouz,et al. Batch foaming of chain extended PLA with supercritical CO2: Influence of the rheological properties and the process parameters on the cellular structure , 2011 .
[34] Sunil C. Joshi,et al. 3D printing in aerospace and its long-term sustainability , 2015 .
[35] R. J. Gaymans,et al. Fracture of polypropylene : 2. The effect of crystallinity , 1998 .
[36] P. Wright,et al. Anisotropic material properties of fused deposition modeling ABS , 2002 .
[37] Adriaan Beukers,et al. Residual stresses in thermoplastic composites—A study of the literature—Part I: Formation of residual stresses , 2006 .