Multi-objective optimization of the design of two-stage flash evaporators: Part 2. Multi-objective optimization

Flash evaporation process is currently developing in the wine industry where it is used for flash-cooling or concentration. The design of flash evaporators is faced with specific constraints and must take into account multiple design objectives. In this paper, the development of a multi-objective optimization method is investigated for the joint optimization of design objectives such as process transportability, environmental efficiency, operative cost or cooling power. The optimization method is based on the aggregation of design objectives through desirability functions and indexes. Desirability functions are suitable for formulating design constraints more precisely than inequality relations and, moreover, the global design model results in an unconstrained optimization problem. However, aggregation methods do make it difficult to compute the global optimum of the design problem. This difficulty has been addressed by developing a distributed genetic algorithm which is not so sensitive to this type of numerical solving difficulty. Another difficulty arises from the weighting method for the aggregation of desirability functions since weight parameters have no physical meaning. This weighting problem is approached through a sensitivity analysis of the weight parameters and by observing their relative influence.

[1]  Louis Gosselin,et al.  Optimal geometry and flow arrangement for minimizing the cost of shell‐and‐tube condensers , 2008 .

[2]  Pradeep K. Sahoo,et al.  Exergoeconomic analysis and optimization of a cogeneration system using evolutionary programming , 2008 .

[3]  Mikhail Sorin,et al.  Synthesis of heat exchanger networks using genetic algorithms , 2008 .

[4]  In-Jun Jeong,et al.  An interactive desirability function method to multiresponse optimization , 2009, Eur. J. Oper. Res..

[5]  Bikash Mohanty,et al.  Energy reduction schemes for multiple effect evaporator systems , 2010 .

[6]  Seyed Taghi Akhavan Niaki,et al.  Multi-response simulation optimization using genetic algorithm within desirability function framework , 2006, Appl. Math. Comput..

[7]  G. Derringer,et al.  Simultaneous Optimization of Several Response Variables , 1980 .

[8]  Louis Gosselin,et al.  Review of utilization of genetic algorithms in heat transfer problems , 2009 .

[9]  Sabah A. Abdul-Wahab,et al.  Optimization of multistage flash desalination process by using a two-level factorial design , 2007 .

[10]  S. Sanaye,et al.  Multi-objective optimization of rotary regenerator using genetic algorithm , 2009 .

[11]  Guoliang Ding,et al.  Application of a genetic algorithm to optimize the refrigerant circuit of fin-and-tube heat exchangers for maximum heat transfer or shortest tube , 2008 .

[12]  Raymond Chiong,et al.  Nature-Inspired Algorithms for Optimisation , 2009, Nature-Inspired Algorithms for Optimisation.

[13]  Xiang Ling,et al.  Optimal design approach for the plate-fin heat exchangers using neural networks cooperated with genetic algorithms , 2008 .