Quadric method for cutter orientation in five-axis sculptured surface machining

Existing orientation strategies in 5-axis sculptured surface machining mostly limit the cutter to incline in one direction and lack an effective approach to assess the orientation. This paper presents the quadric method (QM) that exploits fully the two orientation angles to maximise the machining efficiency at a cutter contact point. The geometric construction assumes that the local shape of a sculptured surface can be suitably approximated by two quadrics. An upper quadric lying above the surface is used to orient the cutter, and a lower quadric lying below the surface is used to evaluate machined strip width. Then, the cutter orientation is optimised with respect to the width and is guaranteed to give no gouging. Both flat-end cutter and fillet-end cutter are considered. Simulated examples demonstrate the improved machining efficiency of the QM over current published methods.

[1]  Robert B. Jerard,et al.  5-axis Machining of Sculptured Surfaces with a Flat-end Cutter , 1994, Comput. Aided Des..

[2]  Johannes Wallner,et al.  On the Geometry of Sculptured Surface Machining , 2000 .

[3]  Nicholas M. Patrikalakis,et al.  Shape Interrogation for Computer Aided Design and Manufacturing , 2002, Springer Berlin Heidelberg.

[4]  Yuan-Shin Lee,et al.  Surface interrogation and machining strip evaluation for 5-axis CNC die and mold machining , 1997 .

[5]  W. Edward Red,et al.  Tool selection for five-axis curvature matched machining , 2002, Comput. Aided Des..

[6]  F. Ismail,et al.  Integrated tool positioning and tool path planning for five-axis machining of sculptured surfaces , 2000 .

[7]  Sanjeev Bedi,et al.  Tool path planning for five-axis machining using the principal axis method , 1997 .

[8]  Xiaowei Tang,et al.  Five-Axis NC Machining of Sculptured Surfaces , 1999 .

[9]  Hans-Jürgen Warnecke,et al.  Orthogonal Distance Fitting of Implicit Curves and Surfaces , 2002, IEEE Trans. Pattern Anal. Mach. Intell..

[10]  Paul J. Gray,et al.  Arc-intersect method for 5-axis tool positioning , 2005, Comput. Aided Des..

[11]  Jean Ponce,et al.  Using Geometric Distance Fits for 3-D Object Modeling and Recognition , 1994, IEEE Trans. Pattern Anal. Mach. Intell..

[12]  Robert J. Cripps.  Algorithms to support point-based cadcam , 2003 .

[13]  George B. Dantzig,et al.  Linear programming and extensions , 1965 .

[14]  Abbas Vafaeesefat,et al.  Penetration–elimination method for five-axis CNC machining of sculptured surfaces , 2007 .

[15]  Paul J. Gray,et al.  Rolling ball method for 5-axis surface machining , 2003, Comput. Aided Des..

[16]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[17]  Yuan-Shin Lee,et al.  Locally optimal cutting positions for 5-axis sculptured surface machining , 2003, Comput. Aided Des..

[18]  Sylvain Petitjean,et al.  A survey of methods for recovering quadrics in triangle meshes , 2002, CSUR.

[19]  Sanjeev Bedi,et al.  Principal curvature alignment technique for machining complex surfaces , 1997 .

[20]  Paul L. Rosin.  Assessing Error of Fit Functions for Ellipses , 1996, CVGIP Graph. Model. Image Process..

[21]  Sanjeev Bedi,et al.  Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces , 2000, Comput. Aided Geom. Des..

[22]  Vaughan R. Pratt,et al.  Direct least-squares fitting of algebraic surfaces , 1987, SIGGRAPH.

[23]  Sanjeev Bedi,et al.  Five-axis milling of spherical surfaces , 1996 .

[24]  Robert J. Vanderbei,et al.  Linear Programming: Foundations and Extensions , 1998, Kluwer international series in operations research and management service.

[25]  Krzysztof Marciniak,et al.  Geometric Modelling for Numerically Controlled Machining , 1992 .

[26]  Daniel Zwillinger,et al.  CRC standard mathematical tables and formulae; 30th edition , 1995 .

[27]  G. Farin.  Curves and Surfaces for Cagd: A Practical Guide , 2001 .

[28]  Sanjeev Bedi,et al.  Intersection approach to multi-point machining of sculptured surfaces , 1998, Comput. Aided Geom. Des..

[29]  Zhiqiang Li,et al.  The analysis of correlative error in principal axis method for five-axis machining of sculptured surfaces , 2005 .

[30]  Yuan-Shin Lee,et al.  Optimizing tool orientations for 5-axis machining by configuration-space search method , 2003, Comput. Aided Des..

[31]  G. W. Vickers,et al.  Ball-Mills Versus End-Mills for Curved Surface Machining , 1989 .

[32]  Joung-Hahn Yoon,et al.  Tool tip gouging avoidance and optimal tool positioning for 5-axis sculptured surface machining , 2003 .

[33]  Radha Sarma,et al.  On local gouging in five-axis sculptured surface machining using flat-end tools , 2000, Comput. Aided Des..