Discrete Element Simulation of Granular Lost Circulation Material Plugging a Fracture

Granular lost circulation material (LCM) is the most commonly used material to reduce drilling fluid loss in drilling industry. Although, the plugging role of granular LCM in fracture is widely accepted by drilling engineers, the control and optimization are still limited due to the lack of the fundamental understanding of the LCM plugging process. This article presents a numerical study of the granular LCM plugging behavior at a particle scale by means of discrete element method (DEM). The effects of the particle shape, size distribution, and concentration on the fracture-plugging performance are studied by a series of controlled numerical experiments. The results are analyzed in terms of plugging depth and time spent before plugging. They are useful to the development of a better understanding and the control of granular LCM plugging process in fractures.

[1]  P. Larsson,et al.  Size Ratio Effects on Particle Contact Evolution at Uniaxial Powder Compaction , 2012 .

[2]  Paul R. Heyliger,et al.  Cold plastic compaction of powders by a network model , 2001 .

[3]  Donald L. Whitfill,et al.  All Lost-Circulation Materials and Systems Are Not Created Equal , 2003 .

[4]  T. M. Nayberg,et al.  Laboratory Study of Lost Circulation Materials for Use in Both Oil-Based and Water-Based Drilling Muds , 1987 .

[5]  E. K. Wright,et al.  Design and Evaluation of Lost-Circulation Materials for Severe Environments , 1990 .

[6]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[7]  J. Barbera,et al.  Contact mechanics , 1999 .

[8]  Pavel Vlasak,et al.  Effect of Particle Size Distribution and Concentration on Flow Behavior of Dense Slurries , 2011 .

[10]  Norman A. Fleck,et al.  THE COMPACTION OF A RANDOM DISTRIBUTION OF METAL CYLINDERS BY THE DISCRETE ELEMENT METHOD , 2001 .

[11]  K. Apostolou,et al.  Discrete element simulation of liquid-particle flows , 2008, Comput. Chem. Eng..

[12]  Mark W. Sanders,et al.  Particulate-Based Loss-Prevention Material - The Secrets of Fracture Sealing Revealed! , 2009 .

[13]  Mark W. Sanders,et al.  Particulate Based Loss-Prevention Material—The Secrets of Fracture Sealing Revealed! , 2008 .

[15]  Paul Zulli,et al.  Numerical simulation of the gas-solid flow in a bed with lateral gas blasting , 2000 .

[16]  C. F. Svoboda,et al.  Optimizing the Selection of Bridging Particles for Reservoir Drilling Fluids , 2000 .

[17]  Carl Gatlin,et al.  SPE-001652-G - Some Effects of Size Distribution on Particle Bridging in Lost Circulation and Filtration Tests , 1961 .

[18]  P. Larsson,et al.  On the local contact behaviour in regular lattices of composite powders , 2007 .

[19]  P. A. Langston,et al.  Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions , 1995 .

[20]  Reginald DesRoches,et al.  A Hertz contact model with non‐linear damping for pounding simulation , 2006 .

[21]  M. Sommerfeld,et al.  Multiphase Flows with Droplets and Particles , 2011 .

[22]  Ali Pilehvari,et al.  Effect of Material Type and Size Distribution on Performance of Loss/Seepage Control Material , 2002 .

[23]  G. McDowell,et al.  The importance of modelling ballast particle shape in the discrete element method , 2006 .

[24]  D. Whitfill,et al.  Comprehensive Approach to Severe Loss Circulation Problems in Russia , 2010 .

[25]  Christophe L. Martin,et al.  Study of the cold compaction of composite powders by the discrete element method , 2003 .

[26]  Spahn,et al.  Model for collisions in granular gases. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[27]  George C. Howard,et al.  An Analysis and the Control of Lost Circulation , 1951 .

[28]  Jiansheng Xiang,et al.  A clustered overlapping sphere algorithm to represent real particles in discrete element modelling , 2009 .

[29]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[30]  FATHI BOUKADI,et al.  A Comparative Study of Lost Circulation Materials , 2004 .

[31]  G. de Saxcé,et al.  Numerical simulation of granular materials by an improved discrete element method , 2005 .