Proposal of Novel Model for a 2 DOF Exoskeleton for Lower-Limb Rehabilitation

Nowadays, engineering is working side by side with medical sciences to design and create devices which could help to improve medical processes. Physiotherapy is one of the areas of medicine in which engineering is working. There, several devices aimed to enhance and assist therapies are being studied and developed. Mechanics and electronics engineering together with physiotherapy are developing exoskeletons, which are electromechanical devices attached to limbs which could help the user to move or correct the movement of the given limbs, providing automatic therapies with flexible and configurable programs to improve the autonomy and fit the needs of each patient. Exoskeletons can enhance the effectiveness of physiotherapy and reduce patient rehabilitation time. As a contribution, this paper proposes a dynamic model for two degrees of freedom (2 DOF) leg exoskeleton acting over the knee and ankle to treat people with partial disability in lower limbs. This model has the advantage that it can be adapted for any person using the variables of mass and height, converting it into a flexible alternative for calculating the exoskeleton dynamics very quickly and adapting them easily for a child’s or young adult’s body. In addition, this paper includes the linearization of the model and an analysis of its respective observability and controllability, as preliminary study for control strategies applications.

[1]  Roberto Bortoletto,et al.  Virtual Modelling of a Real Exoskeleton Constrained to a Human Musculoskeletal Model , 2013, Living Machines.

[2]  Ashish Singla,et al.  Mathematical modelling of a hand crank generator for powering lower-limb exoskeletons , 2016 .

[3]  Katsuhiko Ogata,et al.  Ingeniería de control moderna , 1980 .

[4]  S. Micera,et al.  A hybrid NMES-exoskeleton for real objects interaction , 2015, 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

[5]  Ernest P Hanavan,et al.  A mathematical model of the human body , 1964 .

[6]  Hyunchul Kim,et al.  Kinematic Data Analysis for Post-Stroke Patients Following Bilateral Versus Unilateral Rehabilitation With an Upper Limb Wearable Robotic System , 2013, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[7]  Ali Meghdari,et al.  Design of an optimum torque actuator for augmenting lower extremity exoskeletons in biomechanical framework , 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

[8]  Surachai Panich.  Design and Simulation of Leg-Exoskeleton Suit for Rehabilitation , 2012 .

[9]  Armin Lechler,et al.  Automation of the Casting Process using a model-based NC Architecture , 2015 .

[10]  Dan Zhang,et al.  Novel design of a three degrees of freedom hip exoskeleton based on biomimetic parallel structure , 2011, 2011 IEEE International Conference on Computer Science and Automation Engineering.

[11]  Sunil K. Agrawal,et al.  Exploring laparoscopic surgery training with Cable-driven ARm EXoskeleton (CAREX-M) , 2015, 2015 IEEE International Conference on Rehabilitation Robotics (ICORR).

[12]  Taewoo Kim,et al.  A robot teaching framework for a redundant dual arm manipulator with teleoperation from exoskeleton motion data , 2014, 2014 IEEE-RAS International Conference on Humanoid Robots.

[13]  Roland Werthschützky,et al.  Tool Position Control of an Upper Limb Exoskeleton for Robot-Assisted Surgery , 2015 .

[14]  S.K. Agrawal,et al.  Active Leg Exoskeleton (ALEX) for Gait Rehabilitation of Motor-Impaired Patients , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[15]  Daniel Vélez Día,et al.  Biomechanics and Motor Control of Human Movement , 2013 .

[16]  Wei Wang,et al.  Design frame of a leg exoskeleton for load-carrying augmentation , 2009, 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[17]  Zhiyong Yang,et al.  Total cource locomotion control of assist walking exoskeleton leg , 2011, Proceedings of the 30th Chinese Control Conference.

[18]  Renquan Lu,et al.  Development and Learning Control of a Human Limb With a Rehabilitation Exoskeleton , 2014, IEEE Transactions on Industrial Electronics.

[19]  Jaime Vitola,et al.  Design and control of an exoskeleton in rehabilitation tasks for lower limb , 2016, 2016 XXI Symposium on Signal Processing, Images and Artificial Vision (STSIVA).