Mechanical quality factor enhancement in a silicon micromechanical resonator by low-damage process using neutral beam etching technology

The fabrication and evaluation of silicon micromechanical resonators using neutral beam etching (NBE) technology is presented. An etching technique based on a low energy neutral beam of Cl2/F2/O2 is introduced for making nano-trench patterns on 5 µm-thick silicon. The NBE technology has been investigated to form a highly-anisotropic etching shape. A 5 μm-deep trench pattern having smooth side walls with a gap width of 230 nm is achieved by using NBE. Additionally, a fabrication method for silicon resonators using NBE technology is proposed. The resonant frequency of the fabricated devices with a length of 500 μm, width of 440 μm and thickness of 5 μm is 9.66 MHz, and the average quality factor (Q) value is around 78 000. The devices fabricated by both deep reactive ion etching (DRIE) and NBE are evaluated and compared. The devices fabricated by NBE show that the motional resistances are reduced by almost 11 times from 645 kΩ to 59 kΩ and their output signals (insertion loss) are increased by approximately 15 dB in comparison with those fabricated by DRIE. Especially, devices fabricated by NBE provide the higher Q factors (average Q factor value of around 78 000) than those (average Q factor value of around 61 000) fabricated by DRIE in the same resonator parameters and measurement conditions.

[1]  T. Ono,et al.  Energy-loss mechanism of single-crystal silicon microcantilever due to surface defects generated during plasma processing , 2013 .

[2]  Chao Wang,et al.  Analytical characterization using surface-enhanced Raman scattering (SERS) and microfluidic sampling , 2015, Nanotechnology.

[3]  S. Samukawa,et al.  200-mm-diameter neutral beam source based on inductively coupled plasma etcher and silicon etching , 2010 .

[4]  Robert Puers,et al.  A review of MEMS oscillators for frequency reference and timing applications , 2011 .

[5]  Sunil A. Bhave,et al.  PIEZORESISTIVE SENSING OF A DIELECTRICALLY ACTUATED SILICON BAR RESONATOR , 2008 .

[6]  Nguyen Van Toan,et al.  Fabrication of an hermetically packaged silicon resonator on LTCC substrate , 2013 .

[7]  James D. Plummer,et al.  Characterization of surface mobility on the sidewalls of dry-etched trenches , 1988, Technical Digest., International Electron Devices Meeting.

[8]  Woei Wan Tan,et al.  Micromechanical resonators with submicron capacitive gaps in 2 μm process , 2007 .

[9]  T. Ono,et al.  A capacitive silicon resonator with a movable electrode structure for gap width reduction , 2014 .

[10]  S. Samukawa,et al.  On-Wafer Monitoring of Vacuum-Ultraviolet Radiation Damage in High-Density Plasma Processes , 2001 .

[11]  S. Samukawa,et al.  Numerical study on electron transfer mechanism by collision of ions at graphite surface in highly efficient neutral beam generation , 2012 .

[12]  Damage-free neutral beam etching technology for high mobility FinFETs , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[13]  S. Samukawa,et al.  Generating high-efficiency neutral beams by using negative ions in an inductively coupled plasma source , 2002 .

[14]  S. Samukawa,et al.  Low-damage silicon etching using a neutral beam , 2013 .

[15]  Sheng-Shian Li,et al.  Vibrating micromechanical resonators with solid dielectric capacitive transducer gaps , 2005, Proceedings of the 2005 IEEE International Frequency Control Symposium and Exposition, 2005..

[16]  M. Madou.  Fundamentals of microfabrication : the science of miniaturization , 2002 .

[17]  Farrokh Ayazi,et al.  MEMS for integrated timing and spectral processing , 2009, 2009 IEEE Custom Integrated Circuits Conference.

[18]  Y. H. Lee,et al.  Study of silicon contamination and near‐surface damage caused by CF4/H2 reactive ion etching , 1984 .

[19]  Keizo Suzuki,et al.  Mechanism of Radiation Damage in SiO2/Si Induced by vuv Photons , 1989 .

[20]  C. Nguyen.  MEMS technology for timing and frequency control , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[22]  S. Samukawa,et al.  Effect of neutral beam etching on mechanical property of microcantilevers , 2013 .

[23]  G. K. Ho,et al.  Low-Impedance VHF and UHF Capacitive Silicon Bulk Acoustic Wave Resonators—Part I: Concept and Fabrication , 2007, IEEE Transactions on Electron Devices.

[24]  S. Samukawa.  Novel Neutral Beam Etching Processes for Future Nanoscale Devices , 2007, 2007 Digest of papers Microprocesses and Nanotechnology.

[25]  T. Ono,et al.  Plasma-Induced Deterioration of Mechanical Characteristics of Microcantilever , 2010 .