Influence of external shading on optimum insulation thickness of building walls in a tropical region

This study aims to optimize the thicknesses of insulation layers in external walls of continuously used building in a tropical region according to shade level. The investigation is carried out under steady periodic conditions for various wall orientations using a Simulink model constructed from H-Tools (the library of Simulink models). Walls are assumed to be insulated using expanded polystyrene material. The shade level of the building site is assumed to be varying from 0 to 97% with an increment of 25% or 22%. Yearly cooling load is calculated and used as input to an economic model for the determination of the optimum insulation thickness. It is seen that as shade level increases, optimum insulation thickness decreases at an average rate of 0.035 cm, 0.029 cm and 0.036 cm per percentage of solar radiation blocked for south, north and east/west oriented wall, respectively. Results also show that energy savings vary between 46.89 $ m−2 and 101.29 $ m−2 and payback periods vary between 3.56 years and 4.97 years depending on shade level and wall orientation.

[1]  B. Liu,et al.  Daily insolation on surfaces tilted towards equator , 1961 .

[2]  Figen Balo,et al.  DETERMINATION OF THE ENERGY SAVINGS AND THE OPTIMUM INSULATION THICKNESS IN THE FOUR DIFFERENT INSULATED EXTERIOR WALLS , 2010 .

[3]  Naouel Daouas,et al.  A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads , 2011 .

[4]  U.Teoman Aksoy,et al.  A study on the optimum insulation thicknesses of various types of external walls with respect to different materials, fuels and climate zones in Turkey , 2012 .

[5]  Hasan Karabay,et al.  Determination of optimum thickness of double-glazed windows for the climatic regions of Turkey , 2010 .

[6]  Jacques Miriel,et al.  Study of thermal behaviour of clay wall facing south , 2006 .

[7]  Meral Ozel,et al.  Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate , 2013 .

[8]  Mohammad S. Al-Homoud,et al.  Assessment of monitored energy use and thermal comfort conditions in mosques in hot-humid climates , 2009 .

[9]  E. Peterson,et al.  Effect of Roof Solar Reflectance on the Building Heat Gain in a Hot Climate , 2008 .

[10]  Meral Ozel,et al.  Effect of wall orientation on the optimum insulation thickness by using a dynamic method , 2011 .

[11]  G. Papadakis,et al.  An experimental investigation of the effect of shading with plants for solar control of buildings , 2001 .

[12]  A.L.S. Chan,et al.  Effect of adjacent shading on the thermal performance of residential buildings in a subtropical region , 2012 .

[13]  Meral Ozel,et al.  The influence of exterior surface solar absorptivity on thermal characteristics and optimum insulation thickness , 2012 .

[14]  S. A. Al-Sanea,et al.  Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass , 2011 .

[15]  Ruut Hannele Peuhkuri,et al.  Modeling Building Physics in Simulink , 2002 .

[16]  V. Ismet Ugursal,et al.  Effect of external shading on household energy requirement for heating and cooling in Canada , 2011 .

[17]  Monika Woloszyn,et al.  Tools for performance simulation of heat, air and moisture conditions of whole buildings , 2008 .

[18]  Naouel Daouas,et al.  Analytical periodic solution for the study of thermal performance and optimum insulation thickness of building walls in Tunisia , 2010 .

[19]  A. Rabl,et al.  The average distribution of solar radiation-correlations between diffuse and hemispherical and between daily and hourly insolation values , 1979 .

[20]  Liwei Tian,et al.  A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China , 2009 .

[21]  A. Kemajou Matériaux de construction et confort thermique en zone chaude Application au cas des régions climatiques camerounaises , 2011 .

[22]  C. T. Wit,et al.  Simulation of assimilation, respiration, and transpiration of crops , 1978 .