The Investigation of Marble Cutting Parameters for Energy Consumption

Marble cutting process has very complexity structure with lots of machining and stone parameters. In this paper, a marble test machine fully controlled by PC is presented. The PC based marble test machine is designed for experimental tasks such as determining suitable cutting parameters, developing saw blade performance and marble cutting with optimum electric energy. PC based systems have lots of advantages such as rapid, functional, low cost, adaptable, attractive. PC based systems can also be used industrial environments for improving productivity. Presented PC based marble test machine whereby an experimental test machine was carried out to obtain precise results.

[1]  Jay Porter,et al.  A labVIEW based magnetic resonance imaging console , 1999, Proceedings of the First Joint BMES/EMBS Conference. 1999 IEEE Engineering in Medicine and Biology 21st Annual Conference and the 1999 Annual Fall Meeting of the Biomedical Engineering Society (Cat. N.

[2]  Jui-Hong Horng,et al.  Hybrid MATLAB and LabVIEW with neural network to implement a SCADA system of AC servo motor , 2008, Adv. Eng. Softw..

[3]  Lorella Gabriele,et al.  Using LabVIEW for applying mathematical models in representing phenomena , 2007, Comput. Educ..

[4]  Hao Wu,et al.  The application of the virtual instrument technology in high voltage measuring system , 2002, IEEE/PES Transmission and Distribution Conference and Exhibition.

[5]  Neelima Iyer,et al.  Microconverter AduC 842 and LabVIEW bench: a best suitable approach for real time plotting of pressure area isotherm of monolayer , 2006 .

[6]  Said Mahmut Çinar,et al.  The development of software and hardware for marble cutting tests , 2008 .

[7]  V. Schmidt.  The development of the JET control and data acquisition system , 1998 .

[8]  D. Hazarika,et al.  PC-Based Instrumentation System for the Detection of Moisture Content of Tea Leaves at Its Final Stage , 2006, IEEE Transactions on Instrumentation and Measurement.

[9]  Costin Cepisca,et al.  Contributions concerning the measurements using LabVIEW in steady state nonsinusoidal regime , 2006 .

[10]  Xipeng Xu,et al.  Forces and Energy in Circular Sawing and Grinding of Granite , 2001 .

[11]  A.C. Zoric,et al.  PC-Based System For Electrocardiography And Data Acquisition , 2005, TELSIKS 2005 - 2005 uth International Conference on Telecommunication in ModernSatellite, Cable and Broadcasting Services.

[12]  Wuyi Chen,et al.  Cutting forces and surface finish when machining medium hardness steel using CBN tools , 2000 .

[13]  A. Ersoy,et al.  Performance characteristics of circular diamond saws in cutting different types of rocks , 2004 .

[14]  Wilma Polini,et al.  Force and specific energy in stone cutting by diamond mill , 2004 .

[15]  R. M. Goktan,et al.  Investigation of marble machining performance using an instrumented block-cutter , 2005 .

[16]  Ciro Spataro,et al.  A virtual instrument for measurement of flicker , 1998, IMTC/98 Conference Proceedings. IEEE Instrumentation and Measurement Technology Conference. Where Instrumentation is Going (Cat. No.98CH36222).

[17]  Ciro Spataro,et al.  A virtual instrument for measurement of flicker , 1998, IEEE Trans. Instrum. Meas..

[18]  D. Gee.  The how's and why's of PC based control , 2001, Conference Record of 2001 Annual Pulp and Paper Industry Technical Conference (Cat. No.01CH37209).

[19]  Xipeng Xu,et al.  Quantitative analysis of the loads acting on the abrasive grits in the diamond sawing of granites , 2002 .