High Temperature Tensile Fracture Behavior of Copper-Containing Austenitic Antibacterial Stainless Steel

The mechanical properties and deformation microstructure of cast 304 Cu-containing austenitic stainless steel at 10−3/s strain rate in the range of 700~1200 °C were studied by Gleeble thermal simulator, metallographic microscope and scanning electron microscope. The results showed that the thermoplasticity of 304 Cu-containing austenitic stainless steel was higher than 60% when the temperature was higher than 1000 °C, and the tensile strength as a whole decreased with the increase in temperature. During the tensile process, the morphology and content of ferrite in the test steel were the main factors affecting the high-temperature thermoplastic of the billet. The inclusions near the fracture and the existence of ferrite at the grain boundary greatly affected the formation of microcracks and holes and the fracture.

[1]  Xiang-guo Zeng,et al.  Dynamic Tensile Behavior and Constitutive Modeling of TC21 Titanium Alloy , 2019, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[2]  Yiyi Li,et al.  Effects of nitrogen on precipitation and tensile behaviors of 25Cr 20Ni austenitic stainless steels at elevated temperatures , 2019, Materials Science and Engineering: A.

[3]  Zhenghua Tang,et al.  Study on properties of copper-containing austenitic antibacterial stainless steel , 2019, Materials Technology.

[4]  Sunghak Lee,et al.  Effects of V or Cu Addition on High-Temperature Tensile Properties of High-Ni-Containing Austenitic Cast Steels Used for High-Performance Turbo-Charger Housings , 2018, Metals and Materials International.

[5]  P. La,et al.  Investigating the Tensile Properties of Micro-Nanostructured 304 Stainless Steel with SEM and In-Situ Tension , 2017 .

[6]  Lifeng Zhang,et al.  Control of Transverse Corner Cracks on Low-Carbon Steel Slabs , 2014 .

[7]  X. T. Wang,et al.  Tensile behaviour of 316LN stainless steel at elevated temperatures , 2014 .

[8]  G. Wen,et al.  Effect of Cooling Rates on the Second‐Phase Precipitation and Proeutectoid Phase Transformation of a Nb–Ti Microalloyed Steel Slab , 2013 .

[9]  Liang Zhu,et al.  Hot Ductility and Microstructure in Slab Shell of Low Ni Austenitic Stainless Steel , 2013 .

[10]  S. Abbasi,et al.  Hot ductility of a Fe–Ni–Co alloy in cast and wrought conditions , 2011 .

[11]  B. Mintz,et al.  Hot ductility of steels and its relationship to the problem of transverse cracking in continuous casting , 2010 .

[12]  G.D.Wang,et al.  HOT DUCTILITY OF 304HC STAINLESS STEEL AND THE MODEL OF RESISTANCE TO DEFORMATION , 2009 .

[13]  C. Koo,et al.  Antibacterial properties, corrosion resistance and mechanical properties of Cu-modified SUS 304 stainless steel , 2005 .

[14]  M. Barteri,et al.  Effects of grain size on the properties of a low nickel austenitic stainless steel , 2003 .

[15]  J. Szpunar,et al.  The edge-cracking of AISI 304 stainless steel during hot-rolling , 1999 .

[16]  Kyu Hwan Oh,et al.  Effect of Cooling Rate on ZST, LIT and ZDT of Carbon Steels Near Melting Point , 1998 .

[17]  John J. Jonas,et al.  Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations , 1984 .

[18]  Yasushi Nakamura,et al.  Hot Ductility in Steels in the Temperature Range between 900 and 600°C , 1981 .

[19]  Satoshi Nishimura,et al.  Characteristics of Embrittlement in Steels above 600°C , 1979 .

[20]  Ke Yang,et al.  Antibacterial Mechanism of Copper-bearing Antibacterial Stainless Steel against E:Coli , 2008 .

[21]  M. Q. Lu,et al.  Antibacterial Properties of an Austenitic Antibacterial Stainless Steel and Its Security for Human Body , 2007 .

[22]  Lu Manqi.  The craftwork performance and resistance to corrosion of the Cu-containing antibacterial stainless steels , 2006 .