Controlled Degradation of Polypropylene: A Comprehensive Experimental and Theoretical Investigation

Abstract Experimental and modeling studies of the free-radical-induced degradation of polypropylene (PP) in the melt phase have been carried out. Experiments have been performed in a single-screw plasticating extruder using a peroxide as the free-radical source. Concentration of the peroxide was in the range 0.01–0.6 wt%. Results in the form of melt flow index (MFI) values, viscosity curves, and molecular weight distribution (MWD) of the produced resins are presented here. Based on these results, a constitutive equation describing the shear viscosity of the melt as a function of shear rate, temperature, and molecular weight has been derived. The extensional viscosity of these resins has been determined as a function of strain rate using Cogswell's analysis of converging flows. A previously developed kinetic model (plug flow) has been used to simulate the changes of the average molecular weights of the MWD, and a sensitivity analysis of this model has been carried out.

[1]  A. Hamielec,et al.  Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusion , 1988 .

[2]  H. Fritz,et al.  Polymer Compounding Process for Controlled Peroxide-Degradation of PP , 1986 .

[3]  M. Dorn.  Modification of molecular weight and flow properties of thermoplastics , 1985 .

[4]  C. Kiparissides,et al.  Sensitivity analysis of a batch polymerization reactor , 1984 .

[5]  J. A. Biesenberger,et al.  Principles of Polymerization Engineering , 1983 .

[6]  James L White,et al.  Experimental investigation of the influence of molecular weight distribution on the rheological properties of polypropylene melts , 1980 .

[7]  P. Hudec,et al.  The change of molecular weights at peroxide initiated degradation of polypropylene , 1980 .

[8]  I. C. Mcneill.  Developments in polymer stabilisation—1: Edited by Gerald Scott. Applied Science Publishers Ltd, London. 1979. 334pp. Price: £28·00 , 1980 .

[9]  R. Shroff,et al.  Extensional Flow of Polymer Melts , 1977 .

[10]  R. Schainker,et al.  On the statistical sensitivity analysis of models for chemical kinetics , 1975 .

[11]  S. Katz,et al.  Some problems in particle technology: A statistical mechanical formulation , 1964 .

[12]  R. Kennard,et al.  Ε.I. du Pont de Nemours & Co., Inc. , 1961 .

[13]  N. Allen.  Degradation and stabilisation of polyolefins , 1983 .

[14]  C. Han,et al.  Rheology in polymer processing , 1976 .

[15]  F. N. Cogswell,et al.  Converging flow of polymer melts in extrusion dies , 1972 .