Three-dimensional numerical simulation of the movement of the flexible body under different constraints

For the large deformation of the flexible body may cause the fluid grid distortion, which will make the numerical calculation tedious, even to end, the numerical simulation of the flexible body coupling with the fluid is always a tough problem. In this paper, the flexible body is under two kinds of constrained conditions and the ratio of length-diameter is 1:30. The Reynolds number of the airflow is 513, belonging to the area of low Reynolds number. The control equations of the coupling of flexible body with airflow are built and the adaptive grid control method is adopted to conduct the three-dimensional numerical simulation of the movement of the flexible body. The numerical results show that it is possible to simulate the characteristics of the flexible body’s movement in the low Reynolds number airflow when the appropriate control equations are modeled and suitable equation-solving method is adopted. Unconstrained flexible body would turn over forward along the airflow’s diffusion direction, while constrained flexible body in the flow field will make periodic rotation motion along the axis of the flexible body, and the bending deformation is more obvious than that of unconstrained flexible body. The preliminary three-dimensional numerical simulation can provide references for further research on the characteristics of the yarn movement in high Reynolds number airflow.