Dynamic mechanical analysis of banana fiber reinforced polyester composites

Abstract The dynamic mechanical analysis of banana fiber reinforced polyester composites was carried out with special reference to the effect of fiber loading, frequency and temperature. The intrinsic properties of the components, morphology of the system and the nature of interface between the phases determine the dynamic mechanical properties of the composite. At lower temperatures (in the glassy region), the E ′ values are maximum for the neat polyester whereas at temperatures above T g , the E ′ values are found to be maximum for composites with 40% fiber loading, indicating that the incorporation of banana fiber in polyester matrix induces reinforcing effects appreciably at higher temperatures. The loss modulus and damping peaks were found to be lowered by the incorporation of fiber. The height of the damping peaks depended on the fiber content. When higher fiber content of 40% was used, an additional peak in the tan δ curve, pointing to micro mechanical transitions due to the immobilized polymer layer was evident. The glass transition temperature associated with the damping peak was lowered up to a fiber content of 30%. The T g values were increased with higher fiber content. Cole–Cole analysis was made to understand the phase behavior of the composite samples. A master curve was constructed based on time–temperature super position principle, which allows the prediction of long-term effects. Apparent activation energy of the relaxation process of the composites was also analyzed. The value was found to be maximum for composites with 40% fiber content.

[1]  T. Hatakeyama,et al.  Crystallization of carbon fibre reinforced polypropylene , 1990 .

[2]  Thomas Heinze,et al.  Comprehensive cellulose chemistry , 1998 .

[3]  I. K. Varma,et al.  Composites of glass/modified jute fabric and unsaturated polyester resin , 1989 .

[4]  Sabu Thomas,et al.  Morphology, mechanical and viscoelastic behaviour of blends of nitrile rubber and ethylene-vinyl acetate copolymer , 1995 .

[5]  P. S. Chua Dynamic mechanical analysis studies of the interphase , 1987 .

[6]  Warren P. Mason,et al.  Introduction to polymer viscoelasticity , 1972 .

[7]  A. Macías,et al.  Viscoelastic properties of short carbon fiber thermoplastic (SBS) elastomer composites , 1995 .

[8]  Sabu Thomas,et al.  Thermogravimetric and dynamic mechanical thermal analysis of pineapple fibre reinforced polyethylene composites , 1996 .

[9]  Sabu Thomas,et al.  Oil palm fibers: Morphology, chemical composition, surface modification, and mechanical properties , 1997 .

[10]  Sabu Thomas,et al.  Short Banana Fiber Reinforced Polyester Composites: Mechanical, Failure and Aging Characteristics , 1997 .

[11]  K. T. Mathew,et al.  Composite of short coir fibres and natural rubber : effect of chemical modification, loading and orientation of fibre , 1998 .

[12]  S. Das,et al.  Study of jute fiber reinforced polyester composites by dynamic mechanical analysis , 1999 .

[13]  Sabu Thomas,et al.  Mechanical and viscoelastic properties of short fiber reinforced natural rubber composites: effects of interfacial adhesion, fiber loading, and orientation , 1994 .

[14]  F. Maurer,et al.  Frequency and temperature dependence of molecular and micromechanical transitions in PPO/PMMA/P(S‐g‐EO) blends , 1996 .

[15]  H. Ishida Controlled Interphases in Composite Materials , 1990 .

[16]  F. Maurer,et al.  Micromechanical and microdielectric transitions in P(S-g-EO) modified PPO/PMMA blends , 1997 .

[17]  Sabu Thomas,et al.  Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites , 1996 .

[18]  A. Amash,et al.  Morphology and properties of isotropic and oriented samples of cellulose fibre–polypropylene composites , 2000 .

[19]  Sabu Thomas,et al.  Dynamic mechanical properties of isotactic polypropylene/nitrile rubber blends: Effects of blend ratio, reactive compatibilization, and dynamic vulcanization , 1997 .

[20]  I. Mondragon,et al.  Vinyl ester and unsaturated polyester resins in contact with different chemicals: Dynamic mechanical behavior , 1999 .

[21]  Ronald F. Gibson,et al.  Recent research on enhancement of damping in polymer composites , 1999 .

[22]  R. Gauvin,et al.  Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials , 1993 .

[23]  W. L. Harries,et al.  Dynamic mechanical analysis of polymeric materials , 1990 .

[24]  M. Reboredo,et al.  Mechanical properties of woodflour unsaturated polyester composites , 1998 .

[25]  R. Landel,et al.  Mechanical Properties of Polymers and Composites , 1993 .

[26]  T. Murayama,et al.  Dynamic mechanical analysis of polymeric material , 1978 .

[27]  Sabu Thomas,et al.  Dynamic Mechanical Properties of Short Sisal Fiber Reinforced Low Density Polyethylene Composites , 1993 .

[28]  A. Misra,et al.  Studies on the thermal, dynamic mechanical and rheological behaviour of short-glass-fibre-reinforced composites based on poly(butylene terephthalate)/high density polyethylene blends , 1994 .

[29]  A. Błędzki,et al.  Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibres , 1999 .

[30]  J. Gril,et al.  The effects of adsorbed water on dynamic mechanical properties of wood , 1998 .

[31]  M. Richardson Polymer engineering composites , 1977 .

[32]  J. Thomason Investigation of composite interphase using dynamic mechanical analysis : artifacts and reality , 1990 .