Development of an integrated optical technology for chemical and bio-sensors

Basic steps involved in the fabrication of integrated optical elements will be presented. Emphasis will be put on the development steps required to establish an Integrated Optical Technology based on silicon, which includes from the definition of the waveguide structure to the fabrication and characterization procedures. Aspects such as the numerical simulation of the components, the design of the optical element suitable as sensor, the analysis of the light input coupling methods, and the process parameters fitting according to the required materials will be highlighted in this paper. Finally, two examples will be presented, show its applicability of the developed technological steps. An "optode," or optical absorption sensor, suitable for the measurement of chemical concentration of a given ion in solution, due to modulation of the complex part of the refractive index (RI), and a biosensor based on the coupling efficiency of an optical waveguide cantilever.

[1]  Andreu Llobera,et al.  Characterisation of complex multilayer structures using spectroscopic ellipsometry , 1999 .

[2]  O. Hansen,et al.  Atomic force microscopy probe with piezoresistive read-out and a highly symmetrical Wheatstone bridge arrangement , 2000 .

[3]  Toshihiko Baba,et al.  Dispersion and radiation loss characteristics of antiresonant reflecting optical waveguides-numerical results and analytical expressions , 1992 .

[4]  Ramu V. Ramaswamy,et al.  Modeling of graded-index channel waveguides using nonuniform finite difference method , 1989 .

[5]  M. Miles,et al.  Chemical sensors and biosensors in liquid environment based on microcantilevers with amplified quality factor. , 2001, Ultramicroscopy.

[6]  A. Llobera,et al.  Design and analysis of silicon antiresonant reflecting optical waveguides for evanescent field sensor , 2000, Journal of Lightwave Technology.

[7]  A. Majumdar,et al.  A 2-D microcantilever array for multiplexed biomolecular analysis , 2004, Journal of Microelectromechanical Systems.

[8]  Carlos Domínguez,et al.  Improved integrated waveguide absorbance optodes for ion-selective sensing. , 2002, Analytical chemistry.

[9]  Carlos Domínguez,et al.  Evolution of the mechanical stress on PECVD silicon oxide films under thermal processing , 2000 .

[10]  Javier Tamayo,et al.  Optical sequential readout of microcantilever arrays for biological detection , 2005 .

[11]  Romeo Bernini,et al.  Silicon micromachined hollow optical waveguides for sensing applications , 2002 .

[12]  Anja Boisen,et al.  Modular design of AFM probe with sputtered silicon tip , 2001 .

[13]  Kenichi Iga,et al.  Loss reduction of an ARROW waveguide in shorter wavelength and its stack configuration , 1988 .

[14]  Xianfan Xu,et al.  Laser bending for high-precision curvature adjustment of microcantilevers , 2005 .

[15]  Alexandr Drozhdin,et al.  Beam Optics , 2001 .

[16]  E. A. J. Marcatili,et al.  Dielectric rectangular waveguide and directional coupler for integrated optics , 1969 .

[17]  S Büttgenbach,et al.  Poly(dimethylsiloxane) hollow Abbe prism with microlenses for detection based on absorption and refractive index shift. , 2004, Lab on a chip.

[18]  H. Lang,et al.  Multiple label-free biodetection and quantitative DNA-binding assays on a nanomechanical cantilever array , 2002, Proceedings of the National Academy of Sciences of the United States of America.