Optimization of the Operating and Design Conditions to Reduce the Power Consumption in a Vessel Stirred by a Paddle Impeller

Period. Polytech. Mech. Eng. H. Ameur, Y. Kamla, D. Sahel Abstract Design of the impeller blade is a determining factor in power consumption and mixing quality, which determines consequently the cost of the mixing operation. This study explores the flow patterns and the power required for stirring a Newtonian fluid by paddle impellers. Investigations are carried out via three dimensional (3D) numerical simulations. Effects of the blade curvature, blade diameter, blade number and Reynolds number are analyzed. The curved blade is found to be more efficient to reduce the power consumption, compared with the straight blade. A new correlation is proposed for predicting the power required with two-curved-bladed impellers. The straight and very large blade creates a dead zone in the space between the blade tip and the vertical wall of vessel. This issue may be overcome by the curved blade, which increases consequently the well-mixed region size. A wider well-mixed region may be obtained with the larger curved blade, but with an additional energy cost.

[1]  Zied Driss,et al.  Numerical investigation of turbulent flow generated in baffled stirred vessels equipped with three different turbines in one and two-stage system , 2011 .

[2]  Amer El-Hamouz,et al.  Dispersion of silicone oil in water surfactant solution: Effect of impeller speed, oil viscosity and addition point on drop size distribution , 2009 .

[3]  J. Aubin,et al.  Modeling turbulent flow in stirred tanks with CFD: the influence of the modeling approach, turbulence model and numerical scheme , 2004 .

[4]  T. Ring,et al.  Numerical and experimental investigation of single phase flow characteristics in stirred tanks using Rushton turbine and flotation impeller , 2015 .

[5]  Anupam Dewan,et al.  Fluid dynamics and mixing of single-phase flow in a stirred vessel with a grid disc impeller: Experimental and numerical investigations , 2006 .

[6]  Xueping Gu,et al.  CFD simulation and PIV measurement of the flow field generated by modified pitched blade turbine impellers , 2014 .

[7]  Shenjie Zhou,et al.  Turbulent flow and mixing performance of a novel six-blade grid disc impeller , 2015, Korean Journal of Chemical Engineering.

[8]  H. Ameur.  Mixing of a Viscoplastic Fluid in Cylindrical Vessels Equipped with Paddle Impellers , 2017 .

[9]  Houari Ameur,et al.  Effect of the Inclination of Baffles on the Power Consumption and Fluid Flows in a Vessel Stirred by a Rushton Turbine , 2017 .

[10]  Abdelkader Youcefi,et al.  Power consumption and mixing time in rheologically complex fluids by a two-bladed impeller , 2015 .

[11]  H. Ameur.  Mixing of Shear Thinning Fluids in Cylindrical Tanks: Effect of the Impeller Blade Design and Operating Conditions , 2016 .

[12]  B. Kumar,et al.  Large-eddy simulation of turbulent flow in stirred tank with a curved blade impeller , 2015 .

[13]  G. Montante,et al.  CFD simulations and experimental validation of homogenisation curves and mixing time in stirred Newtonian and pseudoplastic liquids , 2005 .

[14]  H. Ameur.  Effect of the shaft eccentricity and rotational direction on the mixing characteristics in cylindrical tank reactors , 2016 .

[15]  .. M.Bouzit,et al.  CFD Simulations of the 3D Velocity Profile of Paddle Agitator and Two-blade Impeller in Stirred Vessel with a Highly Viscous Newtonian Fluid , 2006 .

[16]  H. Ameur.  Effect of some parameters on the performance of anchor impellers for stirring shear-thinning fluids in a cylindrical vessel , 2016 .

[18]  Joël Bertrand,et al.  Modeling of the 3D hydrodynamics of 2-blade impellers in stirred tanks filled with a highly viscous fluid , 1994 .

[19]  Aoyi Ochieng,et al.  Homogenization energy in a stirred tank , 2008 .

[20]  Catherine Xuereb,et al.  Design of multiple impeller stirred tanks for the mixing of highly viscous fluids using CFD , 2006 .

[21]  Catherine Xuereb,et al.  Scale-up in laminar and transient regimes of a multi-stage stirrer, a CFD approach , 2002 .

[22]  M. Jahoda,et al.  CFD Prediction of Flow and Homogenization in a Stirred Vessel: Part II Vessel with Three and Four Impellers , 2005 .

[23]  Zied Driss,et al.  Computational studies of the pitched blade turbines design effect on the stirred tank flow characteristics , 2010 .

[24]  Shengchao Qiao,et al.  CFD prediction of mean flow field and impeller capacity for pitched blade turbine , 2015 .

[26]  H. Ameur.  Mixing of complex fluids with flat and pitched bladed impellers: Effect of blade attack angle and shear-thinning behaviour , 2016 .

[27]  Suzanne M. Kresta,et al.  The confined impeller stirred tank (CIST): A bench scale testing device for specification of local mixing conditions required in large scale vessels , 2013 .

[28]  Li Li,et al.  Power demand and mixing performance of coaxial mixers in a stirred tank with CMC solution , 2015 .

[29]  A. Gallegos-Muñoz,et al.  Optimal location of axial impellers in a stirred tank applying evolutionary programing and CFD , 2015 .

[30]  Houari Ameur,et al.  Power consumption for stirring shear thinning fluids by two-blade impeller , 2013 .

[31]  Adam Harvey,et al.  Reduced power consumption compared to a traditional stirred tank reactor (STR) for enzymatic saccharification of alpha-cellulose using oscillatory baffled reactor (OBR) technology , 2014 .

[32]  H. Ameur.  3D hydrodynamics involving multiple eccentric impellers in unbaffled cylindrical tank , 2016 .

[33]  S. Ibrahim,et al.  Study of various curved-blade impeller geometries on power consumption in stirred vessel using response surface methodology , 2013 .

[34]  Robert W. Higbee,et al.  Advanced impeller design: Anti-ragging impeller, ARI2 , 2013 .

[35]  Baoqing Liu,et al.  The influence of feeding location on the micromixing performance of novel large-double-blade impeller , 2015 .

[36]  Martin Sommerfeld,et al.  State of the Art and Future Trends in CFD Simulation of Stirred Vessel Hydrodynamics , 2004 .

[37]  H. Ameur.  Modifications in the Rushton turbine for mixing viscoplastic fluids , 2018, Journal of Food Engineering.

[38]  Leila Pakzad,et al.  Characterisation of the mixing of non‐newtonian fluids with a scaba 6SRGT impeller through ert and CFD , 2013 .

[39]  Meguru Kaminoyama,et al.  Starting Torque of Vertical Paddle Impellers , 2017 .