Controlling Solid-Gas Reactions at Nanoscale for Enhanced Thin Film Morphologies and Device Performances in Solution-Processed Cu2ZnSn(S,Se)4 Solar Cells.

Using Cu2ZnSn(S,Se)4 (CZTSSe) as a model system, we demonstrate the kinetic control of solid-gas reactions at nanoscale by manipulating the surface chemistry of both sol-gel nanoparticles (NPs) and colloidal nanocrystals (NCs). Specifically, we first identify that thiourea (commonly used as sulfur source in sol-gel processes for metal sulfides) can transform into melamine upon film formation, which serves as surface ligands for as-formed Cu2ZnSnS4 (CZTS) NPs. We further reveal that the presence of these surface ligands can significantly affect the outcome of the solid-gas reactions, which enables us to effectively control the selenization process during the fabrication of CZTSSe solar cells and achieve optimal film morphologies (continuous large grains) by fine-tuning the amount of surface ligands used. Such enhancement leads to better light absorption and allows us to achieve 6.5% efficiency from CZTSSe solar cells processed via a sol-gel process using nontoxic, low boiling point mixed solvents. We believe our discovery that the ligand of particulate precursors can significantly affect solid-gas reactions is universal to solid-state chemistry and will boost further research in both understanding the fundamentals of solid-state reactions at nanoscale and taking advantage of these reactions to fabricate crystalline thin film semiconductors with better morphologies and performances.

[1]  Hendrik Faber,et al.  Low‐Temperature Solution‐Processed Memory Transistors Based on Zinc Oxide Nanoparticles , 2009 .

[2]  Matthew G. Panthani,et al.  High efficiency solution processed sintered CdTe nanocrystal solar cells: the role of interfaces. , 2014, Nano letters.

[3]  Wei Liu,et al.  A High‐Efficiency Solution‐Deposited Thin‐Film Photovoltaic Device , 2008 .

[4]  N. Duffy,et al.  Cu₂ZnSnS(4x)Se(4(1-x)) solar cells from polar nanocrystal inks. , 2014, Journal of the American Chemical Society.

[5]  P. R. Rajamohanan,et al.  Solid state NMR of a molecular self-assembly: multinuclear approach to the cyanuric acid-melamine system. , 2001, Organic letters.

[6]  A. Rozhenko,et al.  Specificity of 13C NMR Shielding Calculations in Thiocarbonyl Compounds , 2009 .

[7]  Supratik Guha,et al.  Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier , 2012 .

[8]  Enn Mellikov,et al.  Composition and structure of CuInS 2 films prepared by spray pyrolysis , 2000 .

[9]  K. Roelofs,et al.  Formation of Cu-Rich and Sn-Poor CZTSSe via Cu3Sn(S,Se)4-ZnS Solid-Solution as the Intermediate , 2014 .

[10]  G. Konstantatos,et al.  Ultrasensitive solution-cast quantum dot photodetectors , 2006, Nature.

[11]  W. Schnick,et al.  Melem (2,5,8-triamino-tri-s-triazine), an important intermediate during condensation of melamine rings to graphitic carbon nitride: synthesis, structure determination by X-ray powder diffractometry, solid-state NMR, and theoretical studies. , 2003, Journal of the American Chemical Society.

[12]  Tayfun Gokmen,et al.  High Efficiency Cu2ZnSn(S,Se)4 Solar Cells by Applying a Double In2S3/CdS Emitter , 2014, Advanced materials.

[13]  Gang Li,et al.  Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells , 2008 .

[14]  Steven S. Hegedus,et al.  Thin‐film solar cells: device measurements and analysis , 2004 .

[15]  Jong‐Soo Lee,et al.  Soluble precursors for CuInSe2, CuIn(1-x)Ga(x)Se2, and Cu2ZnSn(S,Se)4 based on colloidal nanocrystals and molecular metal chalcogenide surface ligands. , 2012, Journal of the American Chemical Society.

[16]  Yang Yang,et al.  Spatial element distribution control in a fully solution-processed nanocrystals-based 8.6% Cu2ZnSn(S,Se)4 device. , 2014, ACS nano.

[17]  A. Pérez‐Rodríguez,et al.  Antimony-based ligand exchange to promote crystallization in spray-deposited Cu2ZnSnSe4 solar cells. , 2013, Journal of the American Chemical Society.

[18]  D. Ginley,et al.  Low-cost inorganic solar cells: from ink to printed device. , 2010, Chemical reviews.

[19]  A Paul Alivisatos,et al.  Air-Stable All-Inorganic Nanocrystal Solar Cells Processed from Solution , 2005, Science.

[20]  David B. Mitzi,et al.  Solution Processing of Inorganic Materials , 2008 .

[21]  M. Kovalenko,et al.  Band-like transport, high electron mobility and high photoconductivity in all-inorganic nanocrystal arrays. , 2011, Nature nanotechnology.

[22]  Tatsuya Shimoda,et al.  Solution-processed silicon films and transistors , 2006, Nature.

[23]  W. Schnick,et al.  Formation of melamium adducts by pyrolysis of thiourea or melamine/NH4 Cl mixtures. , 2012, Chemistry.

[24]  T. Unold,et al.  Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors. , 2013, Physical chemistry chemical physics : PCCP.

[25]  K. Choudhury,et al.  Studies of the fine-grain sub-layer in the printed CZTSSe photovoltaic devices , 2014 .

[26]  L. Hench,et al.  The sol-gel process , 1990 .

[27]  P. Holloway,et al.  Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures , 2011 .

[28]  Paul Mulvaney,et al.  Solution-processed sintered nanocrystal solar cells via layer-by-layer assembly. , 2011, Nano letters.

[29]  D. Talapin,et al.  Role of Precursor Reactivity in Crystallization of Solution-Processed Semiconductors: The Case of Cu2ZnSnS4 , 2014 .

[30]  P. Puech,et al.  Surfactant-free CZTS nanoparticles as building blocks for low-cost solar cell absorbers , 2012, Nanotechnology.

[31]  Cherie R. Kagan,et al.  Prospects of nanoscience with nanocrystals. , 2015, ACS nano.

[32]  Rakesh Agrawal,et al.  Synthesis and characterization of 15% efficient CIGSSe solar cells from nanoparticle inks , 2015 .

[33]  E. Aydil,et al.  Microstructure evolution and crystal growth in Cu2ZnSnS 4 thin films formed by annealing colloidal nanocrystal coatings , 2014 .

[34]  Rakesh Agrawal,et al.  Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals. , 2010, Journal of the American Chemical Society.

[35]  J. Madarász,et al.  Thermal decomposition of thiourea complexes of Cu(I), Zn(II), and Sn(II) chlorides as precursors for the spray pyrolysis deposition of sulfide thin films , 2001 .

[36]  Choong-Sun Lim,et al.  Panchromatic photon-harvesting by hole-conducting materials in inorganic-organic heterojunction sensitized-solar cell through the formation of nanostructured electron channels. , 2012, Nano letters.

[37]  C. Pakawatchai,et al.  Crystal structures and vibrational spectroscopy of copper(I) thiourea complexes. , 2009, Inorganic chemistry.

[38]  Mohammad Khaja Nazeeruddin,et al.  Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency , 2014, Nature Communications.

[39]  Christopher B. Murray,et al.  Structural diversity in binary nanoparticle superlattices , 2006, Nature.

[40]  H. Gong,et al.  Study on Phase Formation Mechanism of Non- and Near-Stoichiometric Cu2ZnSn(S,Se)4 Film Prepared by Selenization of Cu–Sn–Zn–S Precursors , 2014 .

[41]  H. Ohta,et al.  Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors , 2004, Nature.

[42]  R. Stoltenberg,et al.  Evaluation of solution-processed reduced graphene oxide films as transparent conductors. , 2008, ACS nano.

[43]  David B Mitzi,et al.  High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber , 2010, Advanced materials.

[44]  Jichang Wang,et al.  Thermodynamic analysis of decomposition of thiourea and thiourea oxides. , 2005, The journal of physical chemistry. B.

[45]  W. Schnick,et al.  New light on an old story: formation of melam during thermal condensation of melamine. , 2007, Chemistry.

[46]  D. Mitzi,et al.  The Role of Sodium as a Surfactant and Suppressor of Non‐Radiative Recombination at Internal Surfaces in Cu2ZnSnS4 , 2015 .

[47]  W. Schnick,et al.  Melamine-melem adduct phases: investigating the thermal condensation of melamine. , 2009, Chemistry.

[48]  Yi Cui,et al.  Solution-processed metal nanowire mesh transparent electrodes. , 2008, Nano letters.

[49]  Yizheng Jin,et al.  Solution-processed, high-performance light-emitting diodes based on quantum dots , 2014, Nature.

[50]  Jiang Tang,et al.  Solution‐Processed Antimony Selenide Heterojunction Solar Cells , 2014 .

[51]  Sangsig Kim,et al.  Resistance switching memory devices constructed on plastic with solution-processed titanium oxide , 2009 .

[52]  M. Green,et al.  Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route , 2014 .

[53]  Aram Amassian,et al.  Colloidal-quantum-dot photovoltaics using atomic-ligand passivation. , 2011, Nature materials.

[54]  I. Hermans,et al.  Formation mechanism of Cu2ZnSnSe4 absorber layers during selenization of solution deposited metal precursors , 2013 .

[55]  Moungi G. Bawendi,et al.  Improved performance and stability in quantum dot solar cells through band alignment engineering , 2014, Nature materials.