Effects of frictional forces acting on sidewalls of buried box culverts

The effects of frictional forces acting on the sidewalls of buried box culverts are presented as determined with finite element method (FEM) and detailed soil modelling. The possibility of reducing earth pressure on deeply buried concrete box culverts by the imperfect trench installation (ITI) method has been contemplated during the last several decades. There have been limited research results published primarily regarding the qualitative aspect of load reduction in ITIs. It was found during the course of this study that significant frictional forces develop along the sidewalls of box culverts and adjacent sidefills in ITIs. Current American Association of State Highway and Transportation Officials provisions do not consider these frictional forces, but they cannot be neglected in ITIs, as their effect is dominant. An optimum geometry for the soft zone in ITIs is presented to maximize earth load reductions. The soil–structure interaction at the box culvert–soil interface was found to have a significant effect on total earth pressure acting on the bottom slab. Predictor equations for earth load reduction rates were formulated for ITIs incorporating the optimum soft zone geometry based on the FEM. Copyright © 2007 John Wiley & Sons, Ltd.

[1]  Ernest T. Selig,et al.  Soil Parameters for Design of Buried Pipelines , 1988 .

[2]  R. L. Kondner.  Hyperbolic Stress-Strain Response: Cohesive Soils , 1963 .

[3]  Bryan E. Little,et al.  American Association of State Highway and Transportation Officials. Highway Drainage Guidelines American Association of State Highway and Transportation Officials. LRFD Bridge Design Specifications , 2000 .

[4]  Michael G Katona,et al.  SOIL-STRUCTURE ANALYSIS AND EVALUATION OF BURIED BOX-CULVERT DESIGNS , 1981 .

[5]  Colin B. Brown.  Forces on Rigid Culverts under High Fills , 1967 .

[6]  Jan Vaslestad,et al.  Soil structure interaction of buried culverts , 1990 .

[7]  Jan Vaslestad,et al.  LOAD REDUCTION ON RIGID CULVERTS BENEATH HIGH FILLS: LONG-TERM BEHAVIOR , 1993 .

[8]  J. A. Sladen,et al.  The induced trench method—a critical review and case history , 1988 .

[9]  A Marston,et al.  THE THEORY OF EXTERNAL LOADS ON CLOSED CONDUITS IN THE LIGHT OF THE LATEST EXPERIMENTS , 1930 .

[10]  Lymon C. Reese,et al.  Load Transfer for Axially Loaded Piles in Clay , 1966 .

[11]  Chai H. Yoo,et al.  Bedding and Fill Heights for Concrete Roadway Pipe and Box Culverts - Addendum: New Optimum Soft Zone Geometry for Imperfect Trench Installations of Deeply Buried Concrete Roadway Pipes , 2005 .

[12]  J R Allgood,et al.  CANDE--A MODERN APPROACH FOR THE STRUCTURAL DESIGN AND ANALYSIS OF BURIED CULVERTS , 1976 .

[13]  Chai H. Yoo,et al.  Design Loading on Deeply Buried Box Culverts , 2005 .

[14]  M K Tadros,et al.  SOIL PRESSURE ON BOX CULVERTS , 1989 .

[15]  Arun J. Valsangkar,et al.  Performance of an Induced Trench Installation , 2005 .

[16]  Rp McAffee,et al.  Geotechnical Properties of Compressible Materials Used for Induced Trench Construction , 2004 .